problem

Husaberg FE501 2013 doesnt respond on electric starter all of a sudden I have come to the conclusion of the following: -Battery is working -Starter is functioning when connected with direct power -Starter Relay is functioning -Starter Button is not broken But it still wont turn over when i...

So last year i broke my motor (fc600) So i build new motor with spear parts that i had (fe350) I'm using deltoro 40mm carb so my question is what kinda jetting is good for it? now i have k51 needle 192 main and pilot 45 it works but it's rly stiky in middle range. some times it's cutting spark...

so after lots of singletracking. I'm finally ready to tackle the last problem. so since I've had this bike going again and replacing everything, I've had this power draw overnight so would have to pull main fuse. after playing around I've realized that computer is always on as if I hit the...

Hi My 2010 FE450 starts and goes great for a few km's and then misses and looses power as if it's short of fuel especially on up hills. Eventually dies and after a bit of effort restarts. I've popped the fuel cap thinking it might be air locked with no change. F1 light comes on and fault...

So.. long time follower and reader.:o Engine Nr: 1054383 / 220067 1999-2003 Bike: YU7FC5K94Y0000165 I am changing piston on a 00 mod Husaberg 501. Timing chain was new when I bought it, so was planning on reuse it for season. This is the engine type where you don't have to split the engine to...

Hello guys, sorry for bad english maybe cant describe the problem but maybe you can help something. husaberg fe 350 2013 The engine shuts off while driving or not driving when it is not on gas. I got a video the engine during this problem but i cant send here

Hi everyone, I have a problem with my husaberg, the point is that there is a problem with the 4th gear as I go, sometimes it jumps in this gear and I wonder if it's a problem with the clutch or the gearbox? , I will add that when I put the engine together, I did not give the washer that was in...

Hi, Any help on this ongoing saga is much appreciated. 09 FE 450, when its cold the clutch works perfectly, the lever is nice & normal feeling. The warmer it gets, the pressure/friction/engage point of the clutch moves in closer to the bars, leaving excess floppy lever movement, until the...

Hello community and Husaberg motorcycle fans. For a long time (after the total GO a year ago) I have a problem with starting. In the brand service, they did a complete repair of the engine, starter and gave me a new battery. However, the technician dismantled the automatic decompressor...

Hi I have a Husaberg FE470 year 2001, my engine was knocking so I took it apart and I found the bearing in the rod/crank assembly is bad. I have been calling places that sell Husaberg parts and nobody have parts for this bike, anybody knows where can I buy parts for my engine? Thank you

Hello, (I just got here and its my first post, so be gentle please) I can't get my berg starting. The last time I drove it, it was almost four years ago. I already changed my spark plug, spark plug boot (I cut a piece off the ignition cable), and checked the spark. It isn't the biggest and...

Hello, I recently purchased a fe 600 which has a rebuilt engine but it wont spark. Last owner said he was able to get weak spark but now im not getting any. It has unknown aftermarket stator and replacement cd5006d cdi/coil box. The cdi looks to be in good condition from outside but I can't...

I have an FE400 1998 that won't start and i'm quite sure it has to do with the timing but how do i change it and what marks am i looking for? And how do i know when the sparkplug sparks without the engine even starting at all?

hi I bought a Husaberga FC 600 from 1998 the problem is that I do not want to fire no spark guilty I was a stator I bought a stator I bought but I still do not want to pay sometimes I shoot at the carburetor I do not know if the previous owner founded a good stator and a good magnetic wheel, no...

The front brake on my FS 570 won't firm up. I've repeatedly bled the system with my mityvac and the old fashion spreading the pads. No matter what I do the lever goes almost to the grip. There are no leaks in the system and I only have 1500 miles on it. I'm stumped. I think it's too...

Morning everyone, Just a little niggly problem that I have been having recently, riding my 2004 FE450 on some lanes/roads yesterday and more often than not in the low gears the bike would sometimes randomly knock itself into neutral. It was fine once you got up to third and you was going some...

Hi i have a problem to change gear to 2-> 3. The lever is so stiff i cant use leg, i have to use hand instead. Where should i look for the problem? Do i need to open whole motor? :eek: Ps. Sry for the bad English. Thanks for the answers! Kalle

Husaberg Mystery: I have a Husaberg FE 650 08 with rekluse Z Start Pro , when I bought the bike , the clutch level was hard and Not working when the engine was shut Off. I sent The bike to a Husaberg Repair shop and the mecanic "shimsed or something" so then The clutch was working normaly...

Hy. At my husabergu fe 450e 2007 the backlight works on the speedometer, but there are no numbers on it. Some suggestion of what might be ?

Good afternoon to you all im new and i have a husaberg fe400 from 98 e bought it about half year ago i did normal service and rode it in the summer a lot on the dirt for about 2 months after that when it got hot it just stall and died and i couldnt start it by foot only with pushstart like...