pipe

Boy, I'm having no luck this week! Snapped my gear lever on Wednesday, got it welded-up and re-fitted, changed the oil and cleaned the air filter ready or the weekend. Went out to the track on Sunday and one of the header pipes snapped! Looking from the front, it's the left hand side pipe...

I'm trying to install an '04 complete Husaberg FS 650 Exhaust on an FC 501 '97 model. I have my welder ready to weld some brackets but my problem and question is: The kickstarter will hit the mid pipe severely hanging it out. Is the '04 kickstarter bent to go around the pipe and if so...

I have made a rebuild of my engine, and now i´m putting it back together, and discovered that there are no gaskets!! Shouldnt there be one?

Twin Pipe I built said exhaust for Pascal Picotte in 1995. I Thought the image may stimulate your creativity. Kind Regards, Dale PS I found said picture and a couple others of possible interest while looking for the Husqvarna picture. :lol:

Does anybody know if there are heat shields available for the pipe where it goes around the motor and kinks in towards the kickstarter. I keep on burning holes in my nylons.

I just spent half an hour getting black melted plastic off my pipe. I used a knife blade and 1000grit wet paper, worked like a charm. I then took the bike for a spin and got home and guess what, more black plastic stuff. Looks like my pants are melting on the pipe. Does any one have a fix for...

Is it just me or do all of the Husaberg supermoto bike rear tires rub slightly on the exhaust can?

Any good/general rules of thumb on what the coloring of the head pipes might be as an indicator of lean/good/rich jetting? Lean jetting results in hotter exhaust temps, rich jetting resulting in cooler exhaust temps, etc. The stock head pipes on my 2005 FS650 have turned a nice combination...

anybody out in berg land had a snag with the fuel pipe to the carb rubbing on the carb body ? mines a 501 04 the route of the pipe to the T piece makes it rub on the carb body ! worth havin a look before your mpg go's awol in the middle of of nowere :crazy...

Hey guys I have the small aux tank under my seat but the brain surgeon that designed it put the breather pipe hole at the lowest point on the top. So if the bike sits in the sun and the fuel expands the fuel pisses out. Has anyone re positioned this breather or made any modifications so the tank...

:peace: have a 501 e on the road and am trying to find a tail pipe for it ?? have tryed around but nowone seems to no!! akropovic remus pro circuit ?? and were on earth can you see an fp system ??? not haveing any luck can anyone help??? PLEASE

:?: have a 2001 501 fe on the road and am trying to find a tail pipe for it ?? every one i talk too doesnt have a clue what will fit can anyone point me in the right direction please

:?: Im looking for a used or new race header and end can.I live in Ont Canada,my berg is a 02 501fe with E-start removed . Thanks

just wondered whether anyone had measured the difference in the lengths of these two downpipes. they look way out? certainly won't be good for power. refards Taffy

Hi All, A bit of a hypothetical question here but something I'm interested in your opinions of anyway.... If you were to by a complete after market exhaust system for your bike (it doesn't matter if is enduro mx or sm), at a reasonable price that represents good value for money against...

Hi all , I have a 2004 Fe450 and when the front suspension is compressed the front tire rubs on the exhaust header. Has anyone else had this problem and what have you done about it ???

hello i am thinking of buying a pipe for my 04 husaberg FS650e i was thinking of a full akrapovic full titanium pipe