pipe

Hi everyone. I've recently redone my bike and after tightenig all screws when fitting the exhaust pipe, I've realized that the exhaust touches the spring of the rear suspension. Can anyone tell me if that is normal cos no matter how I install it, it always end up hitting it. I've followed the...

There is a barbed pipe coming out from the back of the head's intake port pointing down and to the left. The parts manual does not show what covers it. I put a piece of hose with a screw at the end to keep if vacuum tight. What is that port for? None of my manuals describe its use. If you do...

So it turns out that although the exhaust sounds good, the mid pipe touches the fuel hose inlet that goes into the carb.... All sorts off issues with that Where it goes 2 in to 1 is further along the pipe then where it should be. So annoying, only just got it and only test drove it once. Re...

Hi does anyone know if a fmf mid pipe will fit between a akro header and end can, I'm sure I have read a few people have done this because akro didn't make a mod pipe for some reason Cheers Sent from my SM-G950F using Tapatalk

09-12 FE/FX 390/450/570 (2) new Twin-Air air filters with new cages. Will not separate. $75 (2) used OE covers (clutch & ignition) includes hardware no gaskets. $75 (1) used tall seat includes new spare foam and unobtainable cover. $100 (1) used EE casesaver #PT-099. $20 (1) used Akrapovic Ti...

I have an '06 650 Berg , with a full Titanium Akrapovic exhaust system , that has been cartwheeled and damaged the section of pipe just before the muffler . Does anyone out there have a replacement section , either new or used , that they might want to sell ?

Hey guys, I'm looking for a right side header pipe for a 2008 FE550 in good shape and no dents. let me know what you have! Best, Greg

I have been planning on making a stainless steel dual exhaust for my 650. Mostly for looks, but it would be nice to make it bring some power too. It would use two Akrapovic silencers. Since the SR Racing dual exhaust has been praised as one of the best aftermarket exhausts, it would be easiest...

Well I was in need of another head pipe shield so I would not need to keep moving the one I have from bike to bike. The one I have is a P3 guard that came on a FE 450. It seams thin compared to others I have used and is chipped and cracked so I decided to try a different brand. I ordered an...

The Mid Pipe on my bike is worn paper thin where it slips in to the muffler. Does anyone in Australia know where I might get a second hand one or has anyone had the same problem and had it repaired.

I'm having a problem with front wheel hitting the header on a -04 fe650, wouldn't be a matter for me otherwise, but my tire has half inch studs on it and it's making some nasty scars on the pipe. The problem isn't huge as of yet, but I need to soften the front to keep it from going all over the...

I recently replaced the header pipe for my Husaberg 2013 FE 501 and now it dies whenever I push the throttle. I was wondering if anybody has had the same problem and whether it's normal. Also if anyone has any possible fixes. Thanks!

Hi guys, I'm looking forward to replace my exhaust pipe (expansion part, not muffler). The serial number on the pipe and some more references are as bellow: Catalytic Converter KTM E1 548.05.009.095 Heracus I have a chance to buy a 2011 KTM 250. Does someone know if these...

Anyone have a cf or alloy pipe guard that will fit on my 08 FE550? I don't think that E-Line makes one any longer? I am pizzed. I had a nice alloy one that was collecting dust for 2-3 years and I know I pitched it last year thinking I would never use it again. :( Any help is appreciated.

Trying to remove the mid pipe on my 11' 570s so I can get it ceramic coated but for the love of God please tell me I don't have to move or remove the motor! I have removed the head pip, have the bike completely stripped down, and removed the rear shock and still can't get it off. Does anyone...

HI Gents, I have squashed my stock header below the mid pipe real good and also where the mid and header join is well out of shape. I have googled my ass off (eyes are burning) and cant seem to find a FMF megabomb header and mid for the 2012 570. All sites saying 09-11 including FMF site? I...

Hey guys, Im currently shopping for an exhaust for my 2010 FE570 and have pretty much decided on the FMF megabomb 4.1 system. My question is are the header pipes the same for all engine sizes or are they all slightly different in dimension? I have noticed that they seem to have different part...

Sorry to trouble you with what I am sure is a simple question. Recently got a FE 390 (upgraded from a 2006 FE 450) and wanted a quick bit of advice refarding the pipe coming out of the valve cover. What does it do!! Is it a breather pipe?? Mine runs down to just in front of the gear shift and...

This is a problem to everybody, as to ride through waterm it will get rusty in little time. There are some sprays to 2-strokes I know that they can spray on and it keeps it protected from rust. Does anybody know any spray which could help protect the exhaust?

I just got made for my Husaberg a low muffler since i mounted the 15 litres rear safari tank, it looks real good and can't wait to test it!!!! I dunno how to post photos so i put a direct link! If anyone has advice please give me! :) http://www.ladakar.com/2011/11/05/husab ... e-preview/