model

Hi! I am not sure, is it FE 501 ? I have VIN number, but I can't find VIN decoder for Husaberg's

Hiya i am the unfortunate owner of the big berg project you may have seen last week, yes thats the one, engine, box, 1000 bits etc. the bike and its engine are currently at dcr however i have been told to prepare for the worst as dave rekons itl cost at least £700 just to get the bike up and...

So how are these new bikes holding up? Anyne running them in corosive environments? Electronic probs? I remember one bike at the FR3 that didn't like the water. I am thinking about the salt water at home and the constant rain and the lack of a kick starter sort of thing.

I'm looking for a Model Bike FE450 Part # H39107010 in 1:12 size to purchase. My dealer says they are not available even though they are listed on the official Husaberg web site. I sure would like one.......anyone out there with any info on how to obtain one of these models ???? The Kid

With the standard shock spring, have members found a shock rebound setting they prefer to the standard rebound setting.

Guys, where is the connector that allows the removal of the rear indicators and number plate light? It looks like it terminates somewhere under the CDI box, but before i go pulling that out, does anybody know exactly where the connector is? Photos would be even better!!!!

I would like to know the model of my carb on my 97 501 fe, so I can go to Dellorto website and look for some parts. If some one knows a good site for carb parts & everything else for the make of the bike I would greatly appreciate it

Hello all, I am new to these forums and new to the Husaberg line. I have for all intents and purposes "inherited" what is supposed to be a 1996 FE 501 but would like to confirm this information in order to find a few bits for the bike. Namely a USFS silencer end cap. I'd appreciate greatly...

Hello, I purchased a 1994 501E Husaberg from a friend of mine and I was checking the valve lash and one of the feelers slid down the camshaft tunnel. After pulling valve cover and the clutch cover off I found it. While inspecting the internals I noticed the wear on the alloy camshaft sprocket...

Ive got a 2005 fs650e which has a 5 inch wide rear rim (engraved on the rim says 5x17) I thought the street models didnt come with 5x17 but a 4.25x17 and cush drive. I swear my bike has cush drive with 5x17 rim can I be wrong? Headstock says the bike is a FE model. Does the 5x17 not...

what issues have cropped up so far for those with a 2009 model ?? we have heard a little about the KTM cam chain tensioner, but it seems like its a very limited problem and easily fixed anyone have any problems so far with the EFI system ? either injectors or fuel pumps etc ?? anything...

Greetings all, I just recieved correspondence from Aqualine to let me know that they will be producing two after market tanks for the 2009 model Husabergs!!! There will be a main tank of 12 liters capacity (3.16 gallons), and a rear tank of 8 liters (2.1 gallons)!!!! The tanks will...

http://cgi.ebay.com/Husaberg-Modell-1-1 ... dZViewItem regards Taffy

after this debacle - http://husaberg.org/index.php?name=PNph ... 5872#75872 im in search of a new bike. could someone help me out with what the important changes between 06,07,08 are. i found some good deals on 06 and 07s, or is it worth it to spend the extra dough to get an 08? BOSS can...

well i've just split my first 2000 engine and survived! i have another here as well! am i right in saying this engine started in 1996? i was pleasantly suprised at how similar it is to the 2001 - 2008 model engine. what i would like to do is build up a picture of all the...

I just picked up a non-running 1998 FE600 to use as a parts bike for my 97 but will see if I can get it going first as it may turn out to be a decent bike. My question is the differences in the sound of the e-start of my 97 and new to me 98. The 97 cranks real good and if the kill switch...

This 2002 501 has less than 10 hours on it if that and runs great other than flaming out when in the tight stull or just noticed today it will do it just after jumping it 10-15 feet 5-6 feet high then hitting the brakes going into 1st gear and turning around to go hit the jump again it will...

Hi all i am new to this site,i have a ktm530exc and i am wanting to buy a second bike and have decided on the 650 berg,i am 6"5 and 95 kgs and the ktms and the bergs are great for us tall ones,a friend of mine has a 07 model fe650 and i have ridden it a couple of times and love it,,,,so the...

From memory the 07,06, and maybe some 05 bergs since the new (pre 09) motor 2001 are ok, but 01 to 04 were to stay away from. Can't remember why. Does anyone recall any major problems with the 04 650FE?? Enough time has gone by to know for sure by now? I thought the big 650 did not have main...

Any model is allowed Enduro, Cross, supermotard, etc. In my opinion year FE 2007 e, has the coolest graphics¡¡¡¡