map

Hey guys, did a little searching but haven't found much info on the service bulletin for the new map and filter. I have a CAN/US 09 so it already has the old comp map. Is the new one better? Change in fuel consumption or performance? Why is the new air filter cage needed? Thanks guys!

I am making my own Map Switch as the Husaberg Map Switch is just too hard to change when you are at the bottom of a nasty hill and all your mates are shaking their heads while you are pulling your gloves off and trying to get to the switch. What could Husaberg have been thinking when they gave...

Hey guys, Hopefully this the right place to post this. I've been working with Paul over at Highway Dirt Bikes to come up with a cool way to mount the MAP switch for our beloved Bergs. This is of course if you are running the HDB setup. Here's the first working prototype. If is very easy...

Hi: I just bought a map switch for my new berg FE450 ´09. How do I install it since it instructions the map came with are no perfectly clear. How do I recognize the cable I have to plug it into?? I tried to fit on the one I though (and it fitted) buy I am not sure if this one is the correct...

just looking thru the member map and realised we only have about 680 entries on it aout of a site list of 4599 According to the memberlist. come on lets try and get some more names on it folks. if you havent done it its quite easy and may help you to find those nearby who could assist with...

Gday, I ride at a medium pace and Im thinking of getting the Mapswitch. Can I get some feedback on the FE450 performance with the Mapswitch set on soft, for technical tracks and hill climbs, as Ive only ever ridden this bike with the power set on full from factory. Thanks in advance for any...

After spending hours searching for the right components, risking few hundreds of $ for stocking them, and then having the headache of selling them (running to FedEx every couple of days) I decided to give up. It just too much work for too small profit. Therefore, I'm rolling the ball to...

Hi can anyone give me information on map settings on a 2010 390 my owners manual hasnt got a thing about it.Dont even have a clue where it is located

Hi, The wiring into the map switch connector has broken on me due to not enough slack. The bike is still running ( 09 fe570) and it seems to be in performance mode where i had it set, unless it reconfigures on start up. It seems to be a sealed connector, is there any way of rewiring into the...

Hey all, Could some one snap me a picture of the 09' map switch plug, either on the bike or on the switch? It would be great if you could give me a size reference or the distance between the pins as well. Thanks.

I didn't like Berg (or KTM690) OEM key. The whole idea of changing map according to the terrain is great, but if you need to stop, to remove gloves, to remove the rubber cup, to twist the base, to rotate it to the map you want, to put back the rubber cup and to put back the gloves...you got...

has anyone fitted the map switch to there berg, and if so how well does it work, say in really slippy situations, only i'm thinking of buying 1

The original map switch has rubber cover for protection from water and mud. The problem is that it is very hard to remove the cover. With one hand I held the connector for support and with the other I was peeling off the rubber cover. Obviously this was not the correct way, as my Map Switch is...

So, it seems if all I want is to be able to select the agressive map, I should be able to make a 2 position switch, 1 position open circuit for the standard, and 1 position with 6800 ohms? Correct? Anyone done this? Does it work on the fly?

The map switch for the new berg isnt exactly a quick change sort of switch. Is there differant swich's out there or is the map switch we have now it. It takes way too long to chage maps, the Sherco 510's switch is quick no cover to take off and replace. ?????????????????????

When installing a headlight on a 09 450 I noticed that one of the wires heading into the map switch connector had been sheared off at the base of the connector itself by a zip ty. The wire that is still remaining is not long enough to do anything with. I am curious if anyone may know where to...

Just curious if anyone has installed the map switch yet. What's required to get it to work? Is there a noticeable difference in the maps? Can you install the switch, set your bike to performance, then remove the switch? Dalton

I have just got back on a berg after a brief 2 smoke stint the first thing i have noticed is the lack of being able to get the power down in slippy conditions like hill climbing and off cambers compared to a 2 smoke the power seems to aggressive and wheel spin is innevitable.I am looking at...

the map is cool,why are so few of us registering on the map?there is no need to be bashful.i have to believe more than 2 people from Sweden,birthplace of Husaberg ,visit this site.come on now everyone get on the map. :whipitgood:

The pinned map is a great idea! I'm looking forward to seeing the map bristling with pins. Thanks again for making this a great site. :wav: