low

- -

Here is a short vid of a very pronounced knocking noise coming from my 05 fe 650. It is really noticeable on cold startup, low idle, and shutdown. The bike idles around 1500, and if I run it up to 2000 the noise abates. It always occurs on shutdown just before the motor comes to rest. The...

If anyone has a stock or low seat for a 2010 FE450 I'm interested in buying it. Also, interested in a damaged seat as I can use the seat pan with a new foam kit. Send a PM here. Thanks!

Hi. I need a stiffer and/or a longer spring for my rear suspenison. I'm about 105kg heavy, and the bike gets very low when riding. The bike feels soft and uncomfy during turns. Where can i buy a stiffer spring, and which one?

I have a 2011 FE 390 and lately the low fuel warning light is now showing up. Can anyone explain where to check the connection for this ?

Hey guys im brand new too bergs only got my 05 650 a week ago and i love it! but.. the brake/tail lights and headlamp have been giving me dramas, they seem to be really dim. so i got the multimetre onto it and im only getting about 3.5v at the brake lights but 12v off the battery? the earth...

As the title suggests i am looking for a low hours 390,450,570 if anyone can help please get in touch i am in the UK and the cash is waiting.Been out of it for a while now but i guess you always come back would like to attend the force ride in May. Regards Darren

hi all i have just bought a 98 fc 600 this is my first berg :D . always had jap up to now. my bike back fires at low rpm and gets hot very quick has anyone got any ideas. i know from my crf 450 that backfires can occour from exhaust leak.(i dont have one). or incorrectly set valve clearance...

Hi, anyone know if the low seat is just less foam, or does it use a different pan that is a little lower? Thanks

Hello, I recently purchased a 2009 Husaberg FE450. I have a question to you pro's out there. :) When I turn on the headlights with the switch, the low beam does not turn on unless I flip the switch to the high beam and then back on the low beam setting. Any idea why that is?

Just got this one on trade - only 35 hours – 634 miles! Complete with Enduro Engineering hand guards, brush deflectors and EE aluminum skid plate. Rekluse Pro auto clutch. Husaberg factory clutch and front brake levers. Two-position ignition map switch, tank blanket, mid-pipe wrap and air box...

2011 fe 390 with just over 3 hrs of life. I get a backfire at low rpm and applying the throttle. it has happened 5 or 6 times. Any ideas?

I just got made for my Husaberg a low muffler since i mounted the 15 litres rear safari tank, it looks real good and can't wait to test it!!!! I dunno how to post photos so i put a direct link! If anyone has advice please give me! :) http://www.ladakar.com/2011/11/05/husab ... e-preview/

I had a lot of electrical troubles so I went through the whole wiring system finding 2 bare wires touching the frame and a couple smashed wires. I fixed all of these but now when I turn the bike on, it is fine with high beams on but when I switch to low beams, I blow either fuse 3 or 5 or both...

My mate just got an 09 570 and we want to put a low fuel light on it. We have a tank sensor, but cannot find a wire to plug it into. We have an old dash light of mine for the front, but cannot find that wire either. Were the 09's not wired for it? I thought the wires would be there just blocked...

hi and just wondering why my forks seem to be low so when i put my bike on a stand with the front wheel off the floor the chrome tube measures at 265mm from axle to dust seal, i have looked at some ktm 525exc forks wich i think would be the same and they measure at 295mm has a preveous owner...

First, a big hello to you all. I picked up a new 2010 a month ago or so and have found this forum to be full of excellent information. So far my only additions are Cycra Series One hand guards and a home-brew map switch, both of which were researched here first. Future addition will be header...

can any one tell me if i take the high an low switch off what setting does the bike have high or low ?? on a 02 650sm and can you upgrade from the sem elec thats on the bike ?? i want a lighter fly wheel so iam looking at one from a mx bike ? will this work ???? cheers

On a 2010fe450 how many miles are left after the fuel light comes on thanks

Hello Dear, This is my first Husa and I don't have some experience. I own FE501 2003 with Dellorto PHM40, the problem is that on small rpm if I open the throttle little bit faster the engine shuts down. How can I fix this? Is it possible to adjust the with the mixture and idling screw or it's...