loose

Question, I have this 2004 FE501 for little over a year now (bought new) and for about the sixt time some srew/nut/bolt came of the bike! Is that 'normal' for the KTM built Husabergs (never experienced this with my 470). Or might there be some other reason for it..? (e.g. some vibration in the...

got 4 ride's on the new BERG .did the oil change and all ,started going over all the bolts and all were LOOSE !!! :evil: iS THIS NORMAL ?? After spending $$$ I'am not to happy !! Great bike tho, thought I'd get better????????????????????????????? :oops:

Hallo! I´m about to change my battery in my Fe501e ´01 and since earlier I knew that the red and black wire, that´s attached to the +cable just by the starterrelay, was on it´s way to break. When I have had the battery removed I discovered that the red and black wire had come...

just keep an eye out for the little screw on top on your plug, mine was completely worn out and no thread left. i was lucky, i didn't have a misfire but what about when the bike is cold and there is a bit of dew around???? another thing. if you check your service schedules you'll note that...

This is the story of the dual sport travels throughout Great Britain and the Americas by a young lady. http://www.b13media.com/lois/index.html Joe

I have noticed that the seat screw works it way out (a few turns) after about 20 miles. I have thought about something (velcro/zip tie) that could go thru the loop and attach to the rear fender. I guess I could use locktite or some silicone. Anyone else have this problem and determined a...

The metal sheath on my brake line that runs into my back brake under the bleeder nipple came loose today (I think it happened after a large stick hit it). I heard a large crack and thought ohh stick no worries. So I was coming up to a log to log jump it and wanted to wash off a bit of speed...

Counter balance shaft gear keeps coming loose ? I've replaced the woodruff key as the old one broke up. There seems to be no wear on the shaft or gear and I trimed the new key down when fitting it but the noise has come back again ? Any advice Guy's. :oops: