lever

Hi, I have a 2014 TE300. I would like to know what other users are using for an aftermarket clutch lever and cable assembly. Specifically I understand some aftermarket products are available for an easier pull for constant clutching for enduro challenging circumstances. Thanks

Hi everyone I am looking for a kickstart lever for a 2004 FE 450. I cannot locate one anywhere. I can only find right sided kickstart lever here but I need a left side Lever

Recently looped out and broke the shift lever in half so after googling and searching i cant really find anything that definitly fits. Anyone tried KTM or the '09+ models shift lever on older models? I need one for my 08 450 Skickat från min SM-G950F via Tapatalk

I am in need of an FTE front brake lever. There are apparently 2 part numbers depending on year. I need the one with the 4 position adjustment knob on top, which I think should be part number 58613002100. When I contacted Motosport.com regarding this part number the fiche image they sent me...

Compression release lever: On my 08' FE 450 the lever is not on the bike to compression release. Is this a big deal or not ? I bought it this way, but do have the set up from another bike to put on. Should I install it ? I know there is one on the cam so ? Thanks in advance---Proflow

On my 08' FE 450 the lever is not on the bike to compression release. Is this a big deal or not ? I bought it this way, but do have the set up from another. Should I install it ? I know there is one on the cam so ? Thanks in advance---Proflow

Could someone tell, that is there a similar sized lever like this https://ktmtwins.com/products/hammerhead-ktm1sl which would fit the 570? My footpegs are elevated significantly and the original lever is just long enough to put my boot under it. Hence I do a lot of misshifts

Hi All Just wondering what after market levers people use? I bought a pair of scar which look nice however the brake does not fit because it is for an FE and mine is converted to Motard so different brake master cylinder and scar only make levers for dirt bikes. Regards Sent from my...

I just bought an unloved 08 650. When trying to start it, the kick lever does not return. Result, you cannot get a proper full "throw". What do I need to buy? ☺ Sent from my iPhone using Tapatalk

I need a kick start lever for a 04 fe450. I totally grudge being paying £100 for one and there seems to be no second hand ones for sale. As you can get cheap aftermarket or second hand kicks for what seems like every other bike apart from ours there must be others that will fit ours anyone any...

Forged rotor. fits Burgs and KTM. $850

Where can I find clutch lever with attached mineral oil box for 2000 Husaberg fc501? Thank you

I have a 2004 FE 450 that appears to be leaking oil from the gear shift lever, it also weeps a little bit from the kick start. I have a new seal for the kick start just have not got time to change it yet. Is the gear shift seal an easy seal to replace, or do i need to split the case? Thank you.

Hi guys and gals, I have a 05 FE550 and was doing the water pump seal when I managed to dislocate the kickstarter mechanism. Fixed that no problem by removing and re-installing the clutch, but now my clutch lever is pretty much stuck. I have a Rekluse Z-Start Pro btw, and pretty sure I...

Hello! Today I changed my clutch and front brake lever, and was left with a tiny tiny question for you, since I am not a mechanical genious like some of you When I pulled out the lever adjuster, this fell out and hit the ground.. I don't know where it was, and I could not see any natural...

Hello! Today I changed my clutch and front brake lever, and was left with a tiny tiny question for you, since I am not a mechanical genious like some of you :p When I pulled out the lever adjuster, this fell out and hit the ground.. I don't know where it was, and I could not see any...

as the title says, anyone have one?

I am replacing the clutch master cylinder piston with the OEM repair kit. Have the kit, but I notice on the master cylinder has a small hole where it looks like a spring should sit. I don't remember one being there. I have photographed the hole (at the 6 oclock position on the master cylinder)...

Hi,could someone please tell me how the dellorto choke lever works?is up full choke or is down full choke.I've read what I can find and cannot find the answer and at the risk of sounding completely inept I'm asking.I just bought the bike and am excited to get out and ride it.I was very excited...

Guys, Just wanted to ask if anyone has found a good after market shift lever that'll fit my 04' 550. May need to go back to the standard unit. I got one of Taffy's as a spare and when it's fitted it seems the spline is a little out of synq. The head of the lever is either somewhat to...