left

I have an '05 FE550 and was out trail riding today on some pretty gnarly rocks - the shift lever got bent into the left case and easily scored the magnesium alloy case cover. I'm wondering if anybody makes a case guard for these? (when I got home I ground the sharp edge off of the shifter...)...

Im a mew member. I live in Utah where can I purchase a Magura Left hand brake kit? I read on the forum that it is in the Husaberg part inventory but I cant see it. Please direct me. Thanks

Had a bit of a disagreement with a tree today. Anyone have a Left side (non-cap) radiator for an '09 Berg 570 that they want to sell? Thanks. Brandon

I hope someone can point me in the right direction please. I'm helping a friend in the week fit a Rekluse clutch (no problem there) :) The thing i cant get my head around is he wants a left handed back brake, But he still want to keep the foot brake as well, Will it just be a matter of running...

My 2005 FE550e is leaking oil out of a screw hole in the left side cover. It seems to be next to an oil passage on the cover and I was wondering if it needs a crush washer maybe or if it is a bigger problem. the gasket or cover are not leaking they are properly seated, it leaks around the head...

2.3 hours on it. I've posted that it's difficult to cold start (even posted a video no one commented on). Riding today and it's running great, kicking butt. About 3 miles into some fast paced single track we pull over, take breather and discuss where to go next. We get ready to go and the bike...

just wondering if anyone out there has fitted a LHRB to their bike while keeping the foot brake? just wondering how the plumbing would need to be set up to make it work? i would like to mount it as a thumb brake, for use when off the bike on a hill etc. or for tight rt. hand downhill switchbacks.

I have (2) 2009 FE570's left at $6999. Brand new, with warranty. [email protected]

Does anyone know where there are some/one new 2008 650's for sale? Cheeseberger picked up the one I was looking at. Congrats. Thanks.

time to use jedi mind control ....go to husaberg ....go to husaberg ....go to husaberg ....go to husaberg various rumours doing the rounds of where he's going husky, honda, kawasaki, yamaha husky has got a good team and cant see room for him there plus they're BMW owned so if he's...

i was doing a '04 650 yesterday and the camchain tension is completely used up! it's fully open. the chain, an IWIS is like new still. i suspect the chain has been rattling around. what i could do with is an old style tensioner with the blob on the end right now..... i also checked and...

I've heard that when re-closing the left cover, is very hard to keep the kickstarter spring in its place. a friend of mine lost hours trying to close the engine. any suggestion? ps: i want to remove the cover to check the wear condition of the primary gear because of the rising engine...

Details on how to get one and a pic here http://www.husaberg.org/index.php?name= ... 3187#73187 Steve

now here is a topic oft covered when i first joined a few years back and haven't seen it since! the oil leaking through the w/p bearing cannot escape out through the leak hole so easily so i want to know what you did about it? same for the oil seal down on the crank, the hole behind...

Typical retarded velo-question: I know that eventually, even a pansy slow old guy like me will need to replace my cam chain. I keep checking for shavings in the oil (none yet at 190 hrs or so). Can I just check the cam chain tensioner somehow to get an idea of whether or not it's running out of...

HI YET AGAIN ANY HELP WOULD BE GREATLY APPRECIATED I HAVE A 03 650. WHEN IT COMES TO STARTING IT IN THE MORNING (AS I USE IT FOR WORK) I PUT THE CHOKE ON(DELLORTO CARB) PUT THE ENGINE TO THE CORRECT POSITION TO START IT AND WITH A ALMIGHTY KICK ATTEMPT TO START IT . THE ENGINE WILL HAVE A...

Why would I be leaking gas on my left side? for a few months now when the tank is filled and I'm loaded in the back of my truck, when I arrive at the staging area to unload I find a splash of gas on my truck bed to the left side........the splash leaks never happen on the way home in the truvk...

Hi folks, On my FE501e (2004) I ran into a little problem. While riding suddenly oil squirted out of the left side of the cilinder head. I turned off the bike right away. Little research learned that the nut/screw on the left side cilininder head came out. I checked the parts manual and found...

:shock: Hi folks, After 10 hours driving with my new 2005 mod. FE650 i changed oil and got a whiining noise/sound from the left side of the enging. The enginge runs perfekt otherwice but this noice makes me a little worried. Have anyone els got this or a solution for this? Is it just...

Hi guys, I was wondering if someone knows what this screw is (please see the attachment, red arrow). It seem to be loose, but cannot be tightened or unscrewed. It seems to sit on a spring washer or something. A little oil seems to come out of there when the engine it running (tiny amount...