left

2008 FE 550 Can anyone verify where the hardware in the two pictures belongs? I've just recently finished assembling the engine after it being apart for quite some time and cannont exactly remember where these pieces of hardware belong. I did follow the instruction manual very closely...

During my ride last weekend my 2002 FE650 developed a dripping leak from the area of the left petcock above the exhaust pipe. The leak stopped after about 20 minutes. This has happened once in the past so I removed the petcock and added a gasket with sealant which seemed to fix the problem...

Hi! I'm looking for OEM left mirror for 2011 Husaberg FE/FS570, part number 61112040000. I know this mirror model is used on a bunch of Husaberg/KTM model. If you have anything, let me know your price with shipping in Canada (USPS). Willing to buy both left and right if required. Thanks!

Has anyone tried using a hydraulic bicycle handbrake lever for the rear brake ? Will it work well enough? I have set off my bicycle just sitting around.

Please help and point me in the right direction. My 450 sounds noisy especially on the left side of the engine. The noise sounds kinda like a bearing noise (what I can remember from two stroke bikes with bearing problems) Where do I start looking? Clutch, valves, timing chain, .... or the...

Hey there I left my mint condition bike outside in bad winter weather for 3 months. Going to replace the sprockets and chain as that's the only thing that appears to be rusted badly. Just wondering what I should fix or check on my bike after it being out for for so long. Thanks !

I can't get the left hand engine cover off. I've removed all the bolts The water pump cover The water pump impelllor The kick lever The kick rubber seal. The gear lever Gear lever seal It will move around the top and the back but seems stuck on the bottom front area? Any advice very much...

hi all, currently awaiting carb bits so whilst the bike is off the road I'm thinking ill do a few bits inside the left engine case. its mainly to put a new kick start spring on as well as a new sledge. i think ill have a look at the selector forks whilst I'm in there and see if they...

I have a 2001 Husaberg FX 470e and it continues to overheat after idling in place for 10 minutes or more. The bike I believe is jetted properly I did the conversion to a keihin carb (FCRMX 41) with the suggested DMS needle and suggested jets. It runs great and starts very easily but when left...

Hey fellow husaberg riders, I have a Husaberg FS 650 e 2006 model, and i want to build a left hand rear brake on my bike. I have been contacting 50stunt, to hear if they had any kits for my bike, and they do not make a kit for my model sadly. I would like to keep my foot brake, i have...

What I am wondering is what bike would the Husaberg community turn to as a alternative bike? So, Husaberg owner's where would you go? Will you buy a Husqvarna now that Husaberg has merged with them like KTM has planned? Or will you go to another company? I bring Beta up because of all...

im after a left half of a crankshaft for a 650 2005 to 2008 628 cc, Clutch side. Key way must be usable but can repair if slight damage

As the post says, I've been trying to get my 05 650 back on the road. I went into the clutch side to replace the WP seal. I've been careful to check kickstart shaft, and check for proper movement prior to installing the cover. Plug out of course. When I install the cover and seat the...

I'm extremely sad to tell you that earlier today Roland Öhrn passed away :-( He truly was one of the most important people for all of us that love the 'Bergs and will be truly missed. It feels like there is so much I want to write but I'm having trouble finding the right words...

Hi guys! I went to my garage to test a few graphics I'm doing for my Berg and as soon as I got there, I immediately changed plans. This is what I saw: Tried to follow it's path in reverse so I could find out where it came from and got more droplets of oil allover: On the frame...

Hi, Can you maybe recognize the noise from left cover in video. It's always the same, in neutral or in gear, with clutch pulled in or with clutch out. Should I be worried about? BR [youtube:3ihqcfmm]http://www.youtube.com/watch?v=4WmtWK3lOIA[/youtube:3ihqcfmm]

Hello I've found 5 Husaberg rod kits for the FC/FE600s! they are OEM, come with little end bush fitted, a big and pin and bearing. they are 250 each which is what they were when Husaberg stopped making them. let me know if you want one! remember, no more are being made..... regards Taffy

My local dealer in QLD australia tells me that there we've seen the last of the new FE570s here. The last remaining 6 bikes sold last week within 2.5 days. There's still plenty of 390s and 450s but 570s are all gone. A guy on another forum confirmed that he couldn't buy a new 570 anywhere in oz...

well i think it's bad news but it would appear that David Larsson has left Husaberg. an automated reply came through from him saying that he had gone on Holiday but was finishing with Husaberg with effect from July 1st. He's steered Husaberg in the right direction and now they have a great...

I'm looking for one or two leftover FE 570's. If anyone has one or two on the east coast, or has a lead please contact me. Thanks in advance, Mike [email protected] Mods, I apologize is this is in the wrong place, please move it if it is.