leaking

Hi, today I found my FE 570 2011 with an small crack on the oil level window, leaking oil. I have never had a knock on it. It shocked me a lot, and I´m really dissapointed about it. I would like to know the reason of cracking this window. I have cheked on my Engine spare parts manual and it...

This is something I have used successfully several times. With all of the tanks being plastic, a small puncture from a tip over while miles away from home can be a real problem. I often ride long distances and come in to fuel stops on almost fumes, so losing even a few ounces of fuel can...

Ok, I went for a ride with friends today and 1.3 miles into the ride we had to pull our bikes under a downed tree. When I started it my buddy motioned at my bike down by the cylinder. Gas was dripping down the engine at a pretty good rate. To cut to the chase, we pulled the tank and checked...

It appears my countershaft is leaking. I've searched the forum for this, as well as going through the Husaberg manuals, but I can find no info on how to fix. The parts manual shows an O ring and an oil seal, but it's not clear if they can be replaced from the outside, and if so, how. Anyone...

Two questions guys... 1/My 390 has started leaking fuel when it falls over. Only started doing it the last few rides and when i start it and lay it's side running at home to look for the leak all seems fine.^dunno It looks like its coming from around the carb area when it does leak...

I have a 2005 FE550 and it has just started leaking a fair bit of coolant from the weephole. I've ordered a kit from Orangeberg and also replacment o-rings/gaskets for the other bits/pieces and hope to do the work to replace the parts in the next week or so. Just waiting now on Australia Post...

I have been noticing that the engine casing is showing signs of leaking oil. I removed the shift lever and repacked the bearing behind it with grease. After a few rides the problem is back. A buddy of mine mentioned something about having to possibly split the cases. Anyone have any other ideas...

My clutch master cylinder seems to be leaking near the lever adjustment on my '09 570. Is this a common problem that is easy to fix? Is it something I can disassemble and clean or do I have to buy a new master cylinder?

I just picked up an 2001 FX470. This thing is a monster! 8O It's my first 4-stroke. I've had 2-strokes for a long time. I just got back from the Desert 100 in Odessa. There was a whole ton of dust that stuck to the cylinder head, due to oil seeping out from the valve cover? Is there a gasket...

I have a 01 Husa fc 470 I seem to be leaking oil down the front of the motor from ythe head. I thought it was the valve cover gaskets so I replaced them. I rode for about an hour no oil leak I then started doing wheelies (cant help it makes me damb happy) then noticed the oil leaking. Any advice...

i recently had the torque converter replaced on my FS 570. Upon the first ride home from the the service centre i noticed it was leaking a blue lightly oily liquid from what appears to be the top of the head over. Anyone got any ideas as to what this may be?

My 2005 FE550e is leaking oil out of a screw hole in the left side cover. It seems to be next to an oil passage on the cover and I was wondering if it needs a crush washer maybe or if it is a bigger problem. the gasket or cover are not leaking they are properly seated, it leaks around the head...

I had my local dealer install some heavier fork springs for me. After a few laps around the local MX track I found some oil weeping out the fork caps. Its not leaking out the air bleeder screw, but from the cap itself. Both sides weeping evenly. Would this be caused by over-filling the oil...

Whats up Guys? I have a 2000 fe400e. I was getting coolant in the oil, and weeping from the block slightly when it was run, causing a emulsion to form and seep out. The previous owner rebuilt the head recently before I bought it, it had 4 hours on the head. Everything was fine til I let it run...

Hello everyone. I am new to this forum and new to Husabergs and 4 strokes. I have always owned 2 strokes but I just bought a 2008 fe450e with 13 hours on it. I have no coolant leaking out of the engine or radiator but everytime I open the radiator cap the fluid is down below the fins. I just...

09' FE450 is leaking around where the fuel regular is screwed in the tank, the gasket looked fine and was in the groove, but the tank seems to have a little to much flex in that area. The bike has been making a hissing sound like the motor was hot, but it been vapor escaping around the...

Finally got my new 550 together and went for my first spin, stopped to look things over after about 5 km's. Low and behold the weep hole was leaking oil, not a great amount but enough to be noticeable. I wiped the oil off of the cases and continued on my ride checking the leak every so often...

Hi all, Has any of you lot experienced the oil filter cover leaking, I replaced the two O rings which did seem to cure it for a while, but now it's back. It's not bad just annoying. I just wedge a piece of tissue between the cover and the clutch cylinder housing to soak up the oil, it also...

hello all, need a bit of help wiv me fuel tap its leaking around where the tap kions the tank it seems that the previous owner has over tightened the screws and stripped the threads and now they don't pull it up tight enough on the little rubber gasket o ring thingy. any ideas on how to fix it...

Hello all I suspect my 06 550 has a valve stem seal which is leaking, upon starting from cold after sitting for a couple of days, she blows smoke for up to 15-20 seconds then clears up, once warm and running there is no sign of oil smoke. The bike had a rebuilt about 35 hours ago due to...