kit

Can't seem to find if they make these still, and if the parts are identical to the FE 570 kit, but with a different front fender. Any pointers on where to source one? Rumor had it that there is a KTM kit that is identical.

Excellent shape. I bought it for a project but it didn't work out. This kit is to neck down a 450 to a more manageable 380 enduro machine. Comes with a new head gasket, piston, liner, rings, wrist pin and clips. 300.00 U.S.

Hi all I dropped in to my local bike shop yesterday and noticed that they had a new aftermarket sticker kit on the specials table. It even includes a new seat cover. I wanted it for my bike but was told it was for a 70 degree fe450. RRP was $399 but reduced to $99. Just thought I'd...

The seal on my slave cylinder is leaking and needs to be replaced. My preference would be to rebuild it while there anyway but I cannot find for sure a rebuild kit. On Amazon, I've found a ktm 9.5 magura rebuild kit but its indicating that it would not fit my 2011 FE570. My magura is a 9.5...

Does anyone know if carb gasket set part#573.31.099.000 includes the inner-gaskets, there in the middle, if you were to completely disassemble the carb to get to the pumper jet. Well, the manual states that the gaskets marked with # are in the kit, but the carb in the parts manual is not...

hi all..my bearings fell apart in the rear and now im looking for the whole repair kit... can someone tell me simple....which wheels are compatible with my husaberg? its really hard to search for husaberg parts ,...ktm is more common... i need to know model and year so i can order perhaps...

Engine is rebuilt and the starter spins strong (2008 FE550), but is not engaging. Instead of buying a new sprague bearing and starter gears, I thought about giving this kit a try Taffmeisters - Husaberg, KTM, Husqvarna, Gas Gas, dirt bikes - servicing, tuning, rebuilds, parts However, I tried...

Hi guy, im looking for a fan kit for 2008 FE 450. I just cant find any!!! Loads out there for 2009+ Will that kit fit?? Any one know of a kit that will bolt stright on to my bike?? Thanks all.

Timbersled kit comes with 96 .and 94 ktm 550, 500 took of my berg fe 650 need piston for.550 , 3500 obo on north idaho 208 7044222 call or text

I'm looking for a rebuild kit for my clutch master cylinder, 2002 501E. I can't find parts for this bike anywhere. Everyone has parts from 2004 on but not before. This seems like it should be an easy item to find, maybe there's a KTM part that will fit? If anyone has any ideas where to find...

Selling, gone back to stock jetting i cant get it right to be honest comes with needle mains 165,162,160,168 pilots 40,38,35 accel pump spacer they charge £80 yours for £50 posted uk only

I can buy a kit with Part# 1256550037 for a good price it's listed for husaberg te 250 2012.... (gpr v4 fat bar stabilizer kit) I am almost sure it would be the same kit /triple clamps on my 570 but want to be sure before buying it and than I could have a steeringdamper I can't mount on my...

Has anyone seen any non OEM sticker kits that look nice for this generation berg? There's some on eBay but they're all just monster energy branded or something... Does anyone produce any that look similair to the 2009+ models?

Ok, here we go... The 'kit' no longer available:( 1: piston, JE? CP? But what spec? 2: liner? Westwood 105.5? 3: head gasket? 4: Studs? ARP? 5: Bushie's piston broke 6: I'm pissed and broke 7: Dr C is alien intelligence How hard can it be?:eek::eek: :p:happy::p

Im looking at a frame and parts I have sitting in my shop. I have a running plated 650 but I'm thinking of something smaller using the spare frame and parts. I have everything to build another 650. I'm considering purchasing cases and parts to build the extra 650 into something smaller. I was...

i now have a rod kit available with the original 120mm centre to centre and thus correct LENGTH rod available for the 2001-2003 400s AND THE 470s. until now we have had to lose 1mm off the length. so back to a straight swop now. I also have a piston that is 0.4mm taller and thus will give...

hey guys I am in need of a piston ring kit for a fe 570, I need a no2 or b size piston, just throwing this out thereto see if any one had a kit they didnt use, base and head gasket would be sweet too

I'm re-building my 2005 FE450 and am in need of a complete engine gasket kit. The OEM kit is way too expensive and I need some help from the 'Berg riding community.

my 06 fe 550 has started to weep threw the weep hole after 365 hrs on the orangeberg wh kit now i need a replacement seal can this be purchased from dealer or is it speciel for the wh kit

Hi everybody :) My crankshaft and rod have made a mess in my engine leaving chips in my bearings. Anyone now a site to buy all the bearings to my engine without getting ruined? Ketil