kickstarter

Hi! I´m mounting the clutch now, and I noticed an axial play of 1mm, is that normal? Without the clutch mounted, the kickstarter works fine, but if I mount the clutch, I have no resistance 1/8 of one turn, and then solid stop. What have I done wrong? Can it be the resistance of all...

Hello. Bike is a 2002 FE501. I'm about to replace my broken kickstart shaft, but I want to make sure I fix another problem while I have it apart. For the last couple of months my kickstarter has been coming up too high. I mean really high. It springs back to the park position, but when I go...

With the introduction of the 2009 Husaberg the end of an era is near. As a kid growing up in America in the 70's seeing the old timers kicking their left hand BSA's, OSSA's and others at poker runs and enduros I used to be in amazement on how they could do that only having been riding Jap...

2002 FE 650 kickstarter not returning any ideas ? just brought bike ; no electic start

Just wondering if I can get a shorter kickstarter for my 98 FE 600, or what would fit. Right now I use a milkcrate in the garage to get extra leverage but I have run across issues in the woods where the e-start fails to fire it over and my short stubby legs are looking for a stump or curb for a...

how do I preload the spring and decomp adjust?when removing side cover kicker mech. the spring tension was lost.

Hi Please help, I put the bike on the right hand side to remove the cover and replace the water pump seal, finished up and now the kickstarter is jammed, won't move, I tried to bump start and when you engage a gear even with the clutch in it drags. it feels like it's got thick glue...

Hello UHE: I changed the original kiscksaterter in my FE501e'02. I put the kickstarter '05-.....now it fells great :D Maybe a little harder because is 1.5 cm. shorter but now it is more comfortable and easy to start engine !!!! With the original my knee was beside my ear :? Best regards...

FE650e '06: after replacing the WP shaft oil o-ring and the WP shaft seal I noticed an issue. After replacing the side cover and tightening the bolts to the torque in the manual, the kick starter will not move. It is binding on the side cover it seems. if i back out the bolts 1/4 of an inch...

I found out something that has me stumped. After I did all the work to the kickstarter this is what I found out. If the bike is leaned over toward the kickstand it can be kicked over but if the bike is up right the kickstarter has no resistance at all (with the exception of the spring). I know...

This is how my kickstarter is mounted on my shaft: As you can see,the end of the kickstarter isn't resting against the white nylon tip.Is it maybe mounted incorrectly at the factory?I think it has to be 1 tooth of the spline to the left so it will rest against the nylon.My dealer tolled...

When I first got this motor it was fairly easy to kickstart. Then I had other problems and the bike was kicked over very much. Now the bike is very hard to kick over. Can even take the sparkplug out and it is still hard to kick over. My question is: Could something had worked loose in the kicker...

Hey guys, i was hoping sonmeone might be able to help me. I have an 02 FE501e and when using the electric start the other day, I heard something go "clunk". Not liking the sound of it, I started the bike using the kickstarter and now the engine makes a loud clicking noise - the same as when...

Hi guys, I have a FC600, Model Year `00 and a small kickstarter issue. The bike is in pretty good shape and there is nothing torn up, just to mention!!!!! Sometimes when I try to start the Berg and don`t do the complete stroke of the kickstarter because the compression kicks in, the Berg...