kickstart

So I bought my bike without the kickstart arm. The seller said that only thing missing was the arm and everything else would be fine. Try to guess was that the case :D. When I installed the kickstart arm it was really, REALLY hard to get it moving, even with the decomp lever. Eventually I got it...

Hey Everyone. Found this bike locally for cheap. It had a rough life.Previous owner broke the kickstart gear and one of the screws for the retaining plate. The screw broke off in the hole. Any ideas how I can get this Screw out without splitting the cases? You can see whats left of the screw in...

Hi everyone I am looking for a kickstart lever for a 2004 FE 450. I cannot locate one anywhere. I can only find right sided kickstart lever here but I need a left side Lever

I bought boxes of very early kickstart knuckles back from Sweden and also those circa 2000-2003. So I made an arm up using the Husaberg knuckle and the aftermarket kickstart arm. the first photo is of the standard set-up: this is my first attempt which I've since sold so that it is getting...

Will any other year kickstart shaft work for a 1998 FC600? Ideas for finding 98 parts?

I'm looking for a good kickstart shaft for a 2003 FE501.

Can the kickstart assembly be removed, shaft, cogs 5 and 4, or does part 5 support the clutch hub? I'm thinking of removing the whole assembly to save weight and replace with a aluminium plug. Can't use the kickstart in this chassis and it's about 1kg! Every bit helps!;)

As the post says, I've been trying to get my 05 650 back on the road. I went into the clutch side to replace the WP seal. I've been careful to check kickstart shaft, and check for proper movement prior to installing the cover. Plug out of course. When I install the cover and seat the...

Hi all I have come across a very good priced 2000 model Husaberg fe 501 with a couple of minor things that need fixing but there is one im not too sure about. it wont kick over, it feels like the kick start is jammed in position and wont move. has anyone heard of this happening? or is...

Hi. Firstly to introduce myself. I have just bought a 2005 fe450 that had come through "midwest racing" (who seem like pretty decent chaps) and was turned into a 380 with an extra underseat fuel tank and some other bits and bobs. I bought it off a friend of mine so that I could road register it...

hi i have fc470 2001 ,i would like to remove starter motor and battery to make it lighter cos its so easy to start with kickstart , what problems will i encounter in doing this and how do i get around these problems . cheers

HELP!!! I took apart the clutch cover to put a new shift fork in. The kick start gear came out when I pulled the cover. I am not able to get the kick start gear to stop grinding on the case and it has no tension on the up stroke of the kick arm. I have the spring in the back side of shaft and...

so i am needing to get my kick-start off and gear shifter to get the cover off. But i can not.i think that when the po stalled then engine and tried to restart it, something happened to the kick-start. it got all chewed up. anyone have any help for me? I dont want to break anything. here is some...

So because the sun was shining I decided to finally check why the kickstart engages so badly and late in the stroke. Here's what I found... The kickstart gear has some smaller marks from the locking pawl, otherwise it looks fine. Kickstart shaft has some quite big marks. Does it matter that...

Hello guys, Im into tidying up my new - old project, a sweet as 2001 FC550, :D its an awesome bike for its age, and has competed in the 2002 Finke Desert race with its former owner (ill post some pics soon), when it turned up, i noticed the kickstart lever was slopped out pretty badly, finally...

Hi fellas! ( bike: husa 650fe -02) Another problem with them sealings. The kickstart sealing is and has been leaking all the time I've had the bike. I remember reading from somewhere that this is a rather common problem in these bikes. The problem is now that it has started to leak much more...

Hi guys just have a little problem with my 02 fe501. It seems as if the kickstart shaft is rotating and putting a fair amount of pressure on the casing causing it to bruise it up a bit. I tried rotating the kickstart on the shaft but it seems to return to the same position and cause the same...

has anyone had any problems regarding starting there new 09 bergs because all of my friends are expecting my fe 450 to start playing up but ive been told by dcr racing uk that this bike/engine has been around since 06/07 and is bullit proof!!

I replaced my kickstart shaft (updated version) and sledge a while back, and have only used it a couple times. I just finished putting on my Revloc clutch and I hear a loud grinding or whining noise. I took everything apart again, and I see that the kickstart gear is grinding on the sledge...

I've seen a few topics like this before and know that when pulling the cases off you can pull the lickstart shaft by mistake etc. What I have is after putting it all back together the kickstart pushes through it's swing fine and returns to it's starting position however at the top position I...