keihin

did anyone actually ever make one of these work well? I know the photos in the doc came from a lad who gave the photos and then went strangely silent about the results.... I see the snowmobiles (skidoos?) use bigger carbs and there are even performance ones out there but what are they? 4T or...

I'm thinking to change the Dellorto carburator in my FE400e '02. Can I fit a FCR37 of Yamaha WR250f 4 stroke 2001?

Hi all, Came across these galleries with high quality photos and info on the FCR Carbs. It's JD Jettings gallery, but open to anyone. http://www.pbase.com/jdjetting1/keihin_fcr_pictures http://www.pbase.com/jdjetting1/keihin_ ... ews&page=1 Old news for some ?? But i liked it, and it's...

hi ! i have a big problem to find a jet to my cab. the jet i am looking for i the pilot air jet in the front of the cab ... the size i want is 50-55 if someone can give a tip where i ca find it, that would be great ... best regards daniel

hi ! i am about to convert from dellorto to keihin fcr 41 on my 650 .. but i reconized that the fcr has got i manuel choke wire. watch this picture. i woundering what i should do whith that ?

Hello boys. Is the Keihin FCR 41 MX to big for my 501 -99? It comes from a Suzuki RMZ 450. And is the change to the Keihin worth it, my Dellorto works fine and allways start easy cold as warm. Have smooth delivery of power in the lower rpm`s and the bike almost never stalls if i don`t fu**...

My Keihin float bowl does not have a leak jet? Do others have that jet?

Hi, I wasn't satisfied with the way a Keihin carburetor fits to the standard intake manifold and decided to go for an aluminum intake manifold with an original KTM intake boot. The manifold's groove is copied from a KTM cylinder head. This way the Keihin fits perfectly. I'm using the intake...

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... NA:GB:1123 at last, some sensible prices for an FCR. this one comes with the right throttle cables, belmouth and all the jetting right yet still didn't make big money. 7 years ago they were £300 and then you had to spend another £80 getting...

Has anyone tried this carb on a FE450E? Will it work? Does it give the bike a noticeable hp increase? Thanks for your input. Guten Tag, Geronimo

I have finally got around to installing a FCR MX carby off a 02 WRF250 onto my 03 FE400 and I will not look back, it is just so much more responsive, smoother and more predictable and along with the rekluse clutch just fitted man I am excited. If you have been putting this off as I did then...

just recently i have got back into dell ortos for the first time in 5 years or more. immediately i have tried the drilling mod on a tuned carb and and what a change that made! next, i listened to a bike on choke and realised that it was too big. loonyberg now uses the #40 and loves it...

Hi, I have an '03 501 FE which currently runs with the Dellorto carb. I have been told on many occasions that a good modification is to upgrade to a Keihin FCR carb. Could anyone tell me what improvements it would be likely to give me and exactly what I would need to carry out the upgrade and...

i know that dale L has converted dell ortos to run keihin. any leads on this? i have been offered a dell orto and intend to convert it if i can. regards Taffy

Hello everybody, its my first post here as an user, im reading sometimes here some useful help. But I have a problem wich I want to clear. I bought not long ago a keihin FCR 41 carburator, on ebay form USA. Now ive mounted it already on my bike but it doesnt run "smoothley" or just...

OK chaps! Having been thoroughly pleased with the performance of my dellorto for so many years :D , I came across an FCR some time ago (this is the FCR not the FCR MX so no start circuit). First things first, I put the Lineaweaver jet kit in. Now on test ride it is far from linear in its...

Hi would anyone out there have the setup for a keihin fcr 41 for a berg fc600. The bike is starting and ticking over erratically but when throttle is opened, stalls. Any help would be greatly appreciated.

What's the use of that little plate on top of the carb cover? Just to easy access for the needle or can somting else be mounted on there? Stock AP membrame next to a Honda ap membrane

i happened to mention to DaleO the other day that my bike seemed to be running richer lately. He told me to look for an 'O' ring in the carb that starts to leak. i ordered a new one without looking and fitted it yesterday. the 'O' ring fits on the small brass housing in the...

Since 3 weeks i own a 550fe 07 with 400 km. Problem : motor bangs and puffs in lower rpm by closing gas. solvings as so far : New CDIunit on it. idle jet is 45 (normal is 38 - 40), standard needle OBDVR, position clip 5 fom above, idling screw is 1,25 windings out. Main jet 180...