info

Hey guys! New to the forum, have been reading it a ton tho. I am another sportbiker wanting to go motard :D I was looking into an '08 FS650e. the closest dealer (4hours away, in another province) has no more bikes and says the factory is sold out too. they say the '09s are coming in...

Hi i have a Berg 470 fc and starter is dead so i take the starter off and put a direct connectioin on him and he works that way but i think the starter relay is broken and i have no number on it to see what i need to buy.Can anyone give me some info about it :twisted: Greetings Falkenberg

This website is much faster than calling KTM...so.... a few questions... 1. Can recalibrate the odometer for the FE to the FS 17" front wheel or do I have to buy a complete odometer? If I do recalibrate what are the numbers for 17"? 2. Is there a shorter kickstand available or do I have to...

looking for a couple of pages from a later manual than the 2003 we have here. unfortunately that manual doesn't cover the DCC just MCC. anyone got the later book, sheets, download with the DCC? regards Taffy

check out this link to see the new berg: http://www.motorcycledaily.com/09novemb ... _450fe.htm

I am working on a 1999 Husqvarna 610 with 45mm Marz Forks and I can't find anyone who knows the correct fork oil level. Does anyone in Husaberg World have any info? Thanks, Fritz

Just spoke with the Mexican Dealer, next month they are presenting the all new bike as a prototype, that is was the news will say, but in fact that is the bike is going out for sale, he told me that the engine will be upside down, the piston goes down as the intake is on the upper part helping...

Hi all Has anyone got any info on alternate suppliers of spares for the 550's, spares such as Piston kit, Sleeve, Gasket kit and Main bearings I could not believe the cost of these genuine from Husaberg. Surely someone is making them after market. Thanks for any info

From friendly sources: New 09 spoted in Akrapovic factory in Slovenia! Guess what he is doing there 8) Cheers, Goran

i've just fitted some new cam follower bearings tonight. looking from the side, i couldn't see this 'ring' in the ends of each pin. so i called the dealer over this and he explained that that "hollow dowel with a pin inside" look was actually only the machine at the factory pressing them in to...

here is a link to get some info for moab. http://www.moab-utah.com/

Hey everyone ,im obviously new hear and to the supermotard scene, through a long string of trades i ended up with a fairly clean 2000 fe600e ,seems to be relatively low hours(although it seems from the color previous owner did not like changing oil!) this bike did not come with a head light or...

Ok since The ride in the great north is off I want to go on a vacation with Four buds in Idaho. I have been in the Baumgardner area for 5 years and would like to try somewhere else. Suggestions? I know some of you guys are from Idaho so lets have it. Pm if you don't want all the world to...

From the head of Chevron Technical: "The moly in Delo 400 is not the kind of moly that would be of concern to wet clutches. It is in as an inhibitor, mainly for oxidation control. They are concerned about molydisulfide, which would be a big problem as it modifies the friction...

I just booked a trip to Morocco to do some riding (1700 km’s, 1050 mls?) through the Atlas Mountains from Fez to Marrakech and now I feel like the luckiest guy on this planet. Of course I will take my Husaberg (’03 FE501E) with me! Somehow in Holland we manage to live without any...

the PDS rear shock doc we're all able to download has a few basic items missing. can anyone help? the exploded view on P2 has no index. our parts manuals are barely the same. on page 34 we're told to get a separate manual to work on the DCC nut. the dual compression set-up. the...

Ok, so I finally have the last bearing I needed to complete my friend's FE400. Now I am mounting the Woessner piston and with it came three rings, one rather thick one with no chrome coating, one smal one with chrome coating and two very small ones which need to be combined with the oilscraper...

Hey all, I wouldn't be surprised if this question has bee asked a bunch of times already, but I haven't found it yet. Now, is there a jet and needle kit available for the Dell Orto? Or, do I have to buy just single parts? Also, is there a book available that describes tuning proceedure...

Just Got A Load Of Spares From GGR This Morning,Sorted Through Them When I Got Home From Work Only To Find No New Head Gasket Or Valve Stem Seals And No New Chain Guide Blade :( Would Like To Get The Head Back On At Least By End Of Play Saturday. What Other Stem Seals Fit? Honda/Yam/Etc?

Hey! Does anyone know what the Duration and lift and timings on in lobe and ex lobe is for the 08 cam stock in 650 -05? Anyone tested to change stock timings anyting? Thx in advance