hub

Hi as anyone ever found other discs that will fit the old husaberg disc bolt patern?????????

Hi there my fellow Bergers, Can anyone help me with a replacement rear hub for my '01 FC 550 please? someone must have a destroyed wheel with a good hub out there somewhere? Mate shredded the original one on the weekend at the track, a very messy explosion... :( Cheers in advance for any...

I would need a front hub for 20mm axle, so my second set of supermoto wheels would be complete. My bike is -02 so all the hubs from -00-02 bikes should fit but what about the older hubs? And what KTM hubs will fit? Propably exc 400 and 520 -00-02 but what about older models?

Will a 2004 650 inner clutch hub fit in a 2001 550? regards

Hello, I have a 96 FE 501 that has a few chipped teeth on the outer clutch hub. Can anyone tell me if outer clutch hubs from other years models will fit my bike(or where I might be able to score one for my bike)?? I see adds for used hubs for a 1991 FC 350 and a 99 FC501 so far, but I'm not...

I just picked up a new 570 from Mark Donnovan at Shoals (stellar service). Rumors circulate about the internal "cush hub" which has resolved issues with the RFS tranny. I have run 10's of thousands of miles on a few 525's and have kept cush hubs on from day one to bypass any problems. I would...

Hi guys If you have had you clutch apart on the 2009/ 2010 could you answer a few questions Is the 2010 husaberg clutch hub dampened Is it by rubber or torsional springs? If I set a 2010 up as a dual sport the torsional spring system works best to dampend the power pulse of the single...

And bent my outer clutch cover and shifter pedle. Can this be fixed with the engine still in ? Do I need a special tool ? I sure am glad it got me home. I was on Lake Creek Trail in the Copper Basin thinkin I was all hot **** on some boulders 25 miles from home.

Noway! all the six screw that keep the chainwheel went loose! now i am changing both chain and chainwheel but i noticed that the hub is broken :( the parts where the six screw that hold the chainwheel are completely broken so i need to replace it. 2 question: the part is have to change...

Hi Just got some talon wheels off of e-bay for my 2003 FS650e. The front hub has 20925 and the rear 20924 stamped on it and the front has the 20mm axle & wheel bearings and bearings spacer, these I can change to suit the 26mm 03 axle but the problem is the brake disc’s fixing bolts...

Just going through the 2006 owners manual looking for torque values reviewing main. and it states all FS models have dampened rear hub. I was told by the dealer and a few others that 2006 doesn't have it. Does anyone know for sure? I wish the bike was here so I could have a look myself. I am...

When popping out the rear wheel bearings on my 97 it seemed as though the hub spacer may be slightly too long. What leads me to believe this is before I removed the bearings it felt as though they were seized. Both were very hard to turn by hand. But once removed the wheel bearings spin freely...

00 02-ktm/husaberg front 03 07-ktm/husabreg front are the same. So can the same years of ktm be used on the rear. Riding a FS 650 motard wanting to build a set of moto cross/ endro wheels

I have been asked to put together a new hub with new wheel rim. I have been told he has all the new spokes as well. Question is...where is best place to start? I have rtenewed countless spokes but never the whole lot! any tips before i end up with an eccentric hub?

Please help me, i am not able to remove the locking bolt (27mm) of the clutch, maybe is a left hand bolt? Have you any idea to lock the clutch without the specific locking tool? Thanks for the answers...

Can someone tell me what are the proper spoke sizing (part numbers) to fit a 17x5 rim and berg cush hub. I'm having troubles matching the recommended spokes (berg part) to fit the cush hub and rim. A full parts breakdown would be great since the 06, 07 berg manuals are incorrect. Jag33

Is there a special tool you must use or can a tool be made to tighten/loosen hex nut holding inner clutch hub on 2006 model.

Hi all, Can some one please confirm if the FS-c's have cush hubs Cheers Mark

Hello all , Has anyone fitted late model KTM rear wheel to 2002 berg ? I see where 2003 front wheels interchange and I know that KTM rear wheel bearings fit my 02 hub however I do not know if sprocket and rotor spacing will be correct . Anyone using talon hubs ? Also , I...

This happened today on my mates KTM 525 2003. Am assuming the bolts came loose. He is lucky to have not fallen off given that it broke off and was wedged in swingarm and wheel. He was at fullnoise 4th gear when it occured. Any way thought you all might like a look and have some stories...