hard

hello all, i havea big problem,i have bought a second hand frame( 2001 or 2002 was supermoto or enduro I think),and did a complete set up for motocross training. There is a 2006 engine in the frame,it l goes well except the suspension,it is impossible to ride for me more than 15 min due...

it's just a cut 'n paste jobbie at present but a chapter called hard starting is long overdue in the doc. this has now been partially satisfied. i will add much more when i can and i know maddel is busy uploading photos and links because just lately we've had a good run on relevant photos...

I HAVE A 2002 501 AND ITS REALLY HARD ON THE UPSHIFT REALLY BAD FROM 2-3 GEAR ANY IDEAS GUYS.

While I was in the gargage last night I tried a trick on my (kick start only when cold) 2001 FX470e. I pull the compression release in just til I feel it "ride the cam". Starts every time now. This is after numerous valve adjustments, carb cleanings,selonoid, on a new battery and a new starter...

I just bought a used 2005 FE450E; only 39 hours. It had the, now standard, starting issues. I am not mechanically gifted. (I learned everything from working on my 03 FE400 and using this site. Taffy, thanks for the Doc.) I think what I just experienced may be of interest to new Husaberg...

Well I just bought an 02 Fx650 on Saturday. I am having the damnest time getting it started. I have checked out the hard start guide. The bike has a Keihin fcr carb with accelerator pump off of ktm 525. I want to learn more about the carb. Carb smells like it is dumping gas....I am going to...

First and second gear will go in easily, but switching on third is hard, but after useing some force and leting down gas it goes in. After reaching on third, upper ones go in easily again, but when i switch back on second, again reaching third is hard. If it helps, one time I almost didnt got...

please help, today my bike went into the local dealer for tuning on rolling road. They have changed the main jet and and the slow speed jet? On the air fuel ratio chart at around 6k revs the peak was going way high, weak i believe. They changed the jets to try to overcome this. The graph...

Hey guys Went for a decent ride this weekend and struck a wee problem. Every time i started to give it the berries for more then a minute or so my bike started to miss and blow smoke and when i stopped there was oil dripping from my side air filter. It was also starting to get a bit cranky...

Just installed a Recluse Auto Clutch in a '96 FC 501. Everything seems to be installed fine except that it has affected the shifting to where it is very "notchy". It does shift though. Has anyone had this experience? Thanks, Chuck

does anybody knows a dealer in toronto for original parts and for aftermarket hard parts?

well, the question is: I´m out riding and the motor dies on me... (often due to my lack of drivingskill! :) ) when I then try to restart with a gear engaged, and the clutch in of course, it starts but dies again almost imidiatly. If I then, instead, try to start it whith no gear engaged...

2002 fe400e The bike has always been hard to start cold. I bought it used with only a few rides on it in 2004 and it was difficult to start cold but once warmed up it started fine off the electric start. So i have tried this I adjusted the valves which all were spot on except for one. I...

I went yesterday training supermoto,I must stop of the bike because burnt skin on bottom,what a heavy hard saddle,are they some options so we can change the saddle or fill it up with something. On long circuit I had never trouble with it,but for short supermotard tracks it is heavy. Greetings

just got the engine for my 2002 Husaberg fe501s back, after a complete overhaul... everything has been changed inside the engine.. But now it is hard to start when cold... it e-start just spins when cold, and using the kick, I have to kick at least 20 times to get it starting! any...

hi im also having a real hard tim findin nuetral while the engine is running. any advice :roll:

just got a 470 fc. and its a bugger to start .i have noticed that my friend as a Decompression lever which comes off the handlebar.on his and i haven't got one on mine i have the cable which comes from then rear of the kickstart and thats working then i kick it over just wondered if that would...

I just picked up my fe400 from the shop today. I am going to fix it myself. I'll need to split the cases and clean them out to eliminate any metal bits from the roller bearings/tappets that got munched. I have never split a husaberg case. I have done plenty of asian 2-stroke cases. Is there...

The bike is an '05 FS650E with approx. 10 hrs. On pavement, when launching a bit more aggressively than normal (little more throttle and a bit of clutch slip) I'm hearing a brief sort of screeching/squealing noise seemingly from the RHS of the motor. I'm not sure exactly where from as it's...

Hi All, Having a problem kicking me berg off. Its a FX650e, but has the lecky start removed. The problem is on the kick there seams to be a lot of resistance to getting the motor spinning, more than on other 650 bergs. There is no way the starter would spin it over. I have done all the...