guide

i am after a rear chain guide for my 08 also some rollers, is there a uk dealer if not can someone ship them to the uk. thanks

Don't know if this has been posted before but makes interesting reading. Takes some balls to do it on a new or rebuilt engine but have a mate who's done this method on quite a few engines, 2 and 4 stroke, with great results. I usually take it real easy on a new engine for the first hundred...

Hey guys, what's all involved in replacing the valve guide seals? I went through the old posts and am a little confused. Do I need to do any machining or can I just pull the old ones out and replace. Is this something a at home do it yourselfer can do or do I need a specialist? The service...

Check out the new Chain Guide made just for the 2009 Husabergs. BOSS has them in stock for your stocking so stock up!!! :D :rock:

Does anybody know where to get a decent replacement rear chain guide. On the weekend i hit a rock and smashed tie original one. I have seen pics of replacement nylon style ones, but cannot remember where they were Any help would be great

Tried to bull dog around a downed tree, and sucked up a branch into my chain guide. Had to remove the metal cover and That dang rubber part is whole and doesn't not come off without breaking the chain. SUCKS!.. good thing I had my sharp knife with me. I had to cut the chain guide off. That...

Quite a good buyers guide this quarter also includes some very funny Husaberg brochure quotes from over the years. how about this one: "Warning! The use of a Husaberg motorcycle causes instant behaviours and lasting detriments in the form of smiles,sudden attacks of shear...

Hey All, As the title says really. This is not a document intended to replace the hard start guide or anything in the Doc. It is meant to compliment them by giving a specific answer to specific questions relating to the e-start - that always turn up on the site - and a specific step by step...

Hi folks, On my FE501e (2004) I ran into a little problem. While riding suddenly oil squirted out of the left side of the cilinder head. I turned off the bike right away. Little research learned that the nut/screw on the left side cilininder head came out. I checked the parts manual and found...

I have attached what seems to be a comprehensive guide to tuning. Might come in handy on my quest to tune my beast and get more petrol into the motor than out of the overflow. Was looking in the Doc but not much info for 600's and the Dellorto. Might be handy for older berg owners. Was...

Took out the valves on my 2002 650 Husa. The exhaust valves came out no problem at all, but the inlet valves I needed to gently tap out with a hammer, I couldn't pull them out by hand. When I try to put the inlet valves back in the guides, they wont go in, they are a fraction bigger. Is...

has anyone found a aftermarket chain guide / block that works? the stock pre 00 ones are very flimsy

Basically everything you might want to know about motorcycle tires but were afraid to ask. A very good writeup, well worth a read. ***************** http://firebladers.bikenet.gr/articles/ ... ology.html One of the most important factors of today’s proper bike handling is tires. After...

hey guys,,, I cant seem to find that 'Valve Adjusting Guide' that was in FAQ,,,, i did print it off but cant find what i did with it,,,, Can anyone re-post it for me? When i adjust my valves now they seem to be noisy,,not to load but dont ever remember being able to hear them,,,should u be...

THE DOC handling and suspension go have a look and see what you think! remember if you think 'i don't get it?' someone else is probably thinking the same thing so please come back here and tell me what you think. BTW, maddel gets all the photos up, cropped ready to go, links and...

does the chain guide swing back and forth?? based on the parts manual pic it looks as though it does.

Offroad Tuning Understanding basic suspension tuning can give you an advantage over your competition, or simply make your riding experience much better. So here is a breakdown of basic suspension tuning and common problems experienced while setting up bikes for different terrain and riding...