gear

Hi guys, I'm rebuilding a 04 650 FSE and found flakes on the oil drain magnet. So I took the engine apart for a full rebuild and found the gear dogs pretty worn. I suppose the metallic flakes come from there. I don't have much experience with these parts, the gears are expensive so I...

Looking for Husaberg Jersy and pants. XXL - XXXl Jersey 40 - 42 pants Thanks

Hi, So I was riding along and went to shift down a gear. As I do, I hear a metallic clunk and my gear lever goes limp and won't reset itself. Manage to get to where I was going and turn the bike off for 5 mins. Go to try and start it again to get home and the E starter is just whining. Tried...

The primary gear for the 2001-2008 models is no longer available. I have the possibility to manufacture these to the factory specifications on dimensions, tolerances, material and hardening. If there is a enough interest I'll have a batch of 10 pieces made. They will cost 1500 SEK ex shipping...

Hi everyone, I have a problem with my husaberg, the point is that there is a problem with the 4th gear as I go, sometimes it jumps in this gear and I wonder if it's a problem with the clutch or the gearbox? , I will add that when I put the engine together, I did not give the washer that was in...

I have a Husaberg jacket ($125), back pack with H2O pouch ($75) and tool pack ($40) for sale.

Looking to buy starter idler gear for 600 electric start husaberg

Hi all hope someone can help When I’m Off the throttle in second gear on rough ground my 2003 fe501 has started jumping into nuetral or first . How can I repair this. Another problem I have is the electric start (or lack of) I have fitted Taffys easy start carb mod which lets me kick start...

This is my first post so I hope its in right section. The problem with my Berg is it will go into 1st gear from neutral fine but wen i shift up for 2nd its like its not quite shifting far enough and I'm still in 1st wen i let of my shifter. Its coming summer soon and im getting more frustrated...

Trying to do the updated dutch clog on my '99 and need the steel gear to go with it! Hope to find one inside of the US. Thanks, Chad

In the parts catalogue it's listed as - Gearwheel, starter/balancer 97- Part No. 250 156-01 It goes between the starter motor & the starter clutch (sprag) I will pay postage from anywhere in the world to Australia if someone has one. Thank you.

Hello. FE470e 2002 A pin is broken, the one on the gear for driving the camchain. Should I just make a new one frome a pice of steel plate, is this okey?? or where can i get a new one? Will a DIY pin do the job.? 2nd: Problem two is a crack on the gear, see pics.. Should i replace this...

Hello, y have a 2010 husaberg fe 450 and after the winter my bike is moving forward in first gear when the clutch is pulled and y can started in gear when y press the start button the bike is moving forward with the clutch pulled, y change the oil ( motorex 10w60 ) and y opened the clutch cover...

On the hunt for some Husaberg riding apparel. MX pants, jersey, jacket, gloves, goggles, etc. Anything Husaberg really. Sizes medium/large. Let me know what you have. Thanks!

I have to replace the countershaft and see there is a puller needed to remove the Primary Gear. I am going to turn one up and wanted to ask if anyone knows what the thread is......I have read somewhere they thought it was 40 x 1.5mm but were not sure Thanks Lance

just to let you know I've made a major investment in getting these made. I should get them in about 4-6 weeks so say August. Price wise? well in the Uk they were about 58gbp plus our EU member VAT of 20%. They'll have to be 83.333 outside the EU and 100 in it. cheers Taffy

All, I'm relatively new to the forum, but I've been lurking in the background soaking up all the great info this community has to offer, so thanks! Picked up a 98 FE501E last fall that wasn't running and had coolant in the oil, the e-start was also not working. Wanted to make sure the bike...

Hi a part that often breaks has just stopped being made. it is the "Freewheel Inner Gear" for the starter Sprague assembly 2002-2008. without it these buikes are going to stop their leccy starting VERY, VERY quickly. :eek: If you have any sprague inner gears you want to sell please get...

Dear All, In 2007 I bought a brand new Husaberg FS650E (2007 model) and from then I just loved it. For the first time since then I have a problem with mi bike. The Primary Gear 29-T broke. It is located on the crankshaft. The part number is 80032000029 and in the manual it is shown as figure...

1. Husaberg Long sleeve shirt (L) 2.Husaberg race pants (30 but I'm 34 and it is fine on me) 3.Husaberg race jacket (M) I'm large to extra large size and it is fine. 4. All in perfectly new condition (LIKE NEW) Bought New from local KTM/Husaberg Dealer, Used only once on a light offroad...