front

Hi guys my front brake has stopped working, pads are fine etc. Tried bleeding but getting no pressure on lever just soft. Think a seal maybe gone. Anyway have been looking for a master cylinder repair kit for my 2012 model but can only find kit for rear brake. Does anyone know where I can get...

I have a 95 FE and and 98 FC. They both have the WP front end but the FE has the upside-down version vs the standard version on the FC. What are the performance differences between the two types? (and which is better?) By the way, the front wheels are not interchangeable due to the different...

Hello everyone. I am brand new to this forum. I'm in a pinch and need help. I need to replace the front brake caliper and brake line on a 2011 FS570. I tried to buy the OEM replacement but the part is no longer available. Our caliper has a hole in it. We tried to repair it but it's not...

Just thought I'd write this journey for anyone with a 17mm axle LC4 Front wheel doing a conversion to 20mm and hopefully this will prevent a few trial and error bits along the way. To convert the 17mm front wheel it is intensive but this is what I've learnt... The speedo side bearing is (from...

anyone know where crash sliders for fs 650 berg are cheap ta

Hi All, First post so be gentle.....lol Apart from riding and tinkering, my other pastime is light Engineering work ie Turning and Milling. I was recently give the task of resurrecting a badly bruised front axle from a 1999 FE 600. This axle came to me with a Bearing (6302) firmly...

I have a 1996 400 Husaberg front Wheel. Will the 501 front wheel from a 1999 Husaberg be a direct swap? They look the same. A little help before I pay for long distance shipping. thank you....sl

2010 Fe450 Little help? Can anyone tell me what this is/does? Fig 40 on fiche? its a 10 or 12mm hex head bolt on the rotor side of the axle under the axle nut. When I tighten it seems to ratchet or click? I just finished replacing the brake pads and installed a new rotor and now the brakes seem...

The front brake on my FS 570 won't firm up. I've repeatedly bled the system with my mityvac and the old fashion spreading the pads. No matter what I do the lever goes almost to the grip. There are no leaks in the system and I only have 1500 miles on it. I'm stumped. I think it's too...

I am in need of an FTE front brake lever. There are apparently 2 part numbers depending on year. I need the one with the 4 position adjustment knob on top, which I think should be part number 58613002100. When I contacted Motosport.com regarding this part number the fiche image they sent me...

Hi, I'm looking for some brake upgrade for my FE 570, for street SM. Either complete set or only disc, pump, caliper separately. Best from around Europe. PM me directly. Thanks.

Hello, Is it possible to fit headlight and f. fender from "newer" model 2009.-2013. on older model (Fe450E 2004.) and if it is, do i need to do some custom work ? (except wiring) Regards

我來自台灣 最近我的2011 fs570出現了 火星塞無法跳火的情形 也查了許多地方 汽油泵浦有作動 啟動繼電器也查了 電瓶更換新的 點火線圈也換了 依舊無法解決 可以請教有無關於線路的圖解說明

Hello everyone, Iam looking to get plastic parts front and rear fender blue for Husaberg FE 08, could anyone help ? It have to be like new condition. many thanks.

Hello all, I'm searching for a new or used Front fender 1999 normal yellow. I do have 3 pieces neon yellow 1997/1998 for sale.

Hello So I have a aeronal beringer front disc that floats over excessively I would say. Any ideas where I can change the bushes or is it wise to just change the whole disc? It’s pretty big 320mm so will be expensive Unless you guys know of a good replacement? Thank you My bike is 2004...

Hi all, Has anyone done a rebuild on the master cylinder on the FS, separate fluid resivouir. Where do you get parts? I have tried munn racing been good in the past with the parts fiche but they dont seem to do husabergs any more? Also how do you get the piston out of the housing? There...

Does anyone know if the front brake disc bolt patterns are the same for 2006 and 2009. I want to put on an over sixed disc. Lots available for 2009 and on but not showing 2006.

Last ice race I attended I got pushed off bad, looped the bike and the brace for the front fender broke. Problem is I got it from a husaberg friend that got it in his turn, so Im not sure what bike had this oem? Guessing its from an mx model 00-08? Anyone recognizing this piece and can tell...

I've been searching for 2 weeks and have been through 3 different brackets trying to figure this out and I'm at my wits end. I'm trying to find a 320MM Caliper relocation bracket for my 2009 FE570 so I can use my Supermotowheel. The last one I tried was the an EBC BRK012 but the holes for the...