flywheel

Anybody run a lightened flywheel on their 650. It made a difference on my CR500 and am thinking of trying it on my 650.

I am new to husabergs, I just bought a 2008 FE650.I would like to add some flywheel weight to smooth the motor out and make it easier for me to lug the motor. Has anyone found anything that would work? any advice?

2013 FE350 I'm replacing a flywheel which was bent from a rock puncturing my ignition cover. Any hints on removing the roller freewheel bearing pack that fits into the back of the flywheel. It's in there tight. It's super spendy on top of an already expensive repair. Thx!!

i broke my flywheel rebuilding my 501 after it was stolen and trashed. now im up the creek without a paddle cause i cant find one anywhere. my luck has to change soon.

Hi, I was checking axial play of crank on flywheel side, by pulling it out and in. Can it be measured like what I do on picture? I measure 0,6 mm, like what I was reading in 'doc, that is ok for 2 roller bearings. Do you know what type of bearings were used in FE501 2003, in spare part is...

I have a couple of cracked magnets on my flywheel and am considering an attempt to "rebuild" the flywheel, possibly with high-temp Neodymium magnets. Anybody ever tried this before? I assume that the stronger Neodymium magnets would help generate stronger charging pulses for the CDI and they...

Hello. sorry for my English. My flywheel with magnets broken off I can fit in my Husaberg FE400 2002 by KTM 620 lc4 flywheel of 1995? I can take another model? KTM, Husqvarna, etc.? Does anyone have one for sale and sent to Spain?

Hy I have never done anything with a strobe lignt, but I've ordered one to try to set the timming right, the problem is that I've read several times the owners docs and I still can´t understand !! To make it simple, if I do: Find TDC (whatever the way) Make a new mark on the flywheel 5d to the...

Hi All, I have a problem with my 2002 501 flywheel, some of the magnets have come adrift, are there any suitable after market manufactures which sell an improved flywheel and stator as a kit? Regards Aussieberg.

Ok, so this is the situation! My magnets has left the flywheel! As the subject says.... has anyone tried to repair it? or do I have to find a "new" one? /Rikard

I am considering the purchase of a 2010 FX 450.... I am wondering if the FX/FE model share the same flywheel? ie weight, tractability and ability to operate race lighting? Thank you for any insites.

Is it possible to mount a (sem) MX flywheel for trackdays so my engine will rev quicker? I know I wont have lights etc, but no need for it on a trackday. Thanks

Now then all im struggling to find a puller for my 2002 470 the threads on the outside of the flywheel and not the inside anyone know where i can find one? ATB Jak

Need to install a new flywheel on my 01 FC550 due to the magnet coating chipping off and was wondering if there is a topic on the removal and replacement of the flywheel. Not sure how to stop the flywheel from turning so I can remove the nut that holds it in place. Wondering if I need any...

is the 08 450 flywheel the same as a rfs ktm?

Can anyone tell me the correct size flywheel puller for a 2008 FE450? I have a certificate from Motion Pro for 50% off and I need the correct thread-pitch and right or left hand. thanks HusaRod

Hallo! My magnets at the flywheel are comming loose... What can I do about it? Fix them with glue? I´ve searched on the topic but couldn´t find any answers! Anyone outthere with a clue? :D /Rikard

Hi there, There is a christmas time, and I've got lots of spare time.I'm not satisfied wit sitting down fith familly and listening all these woman's *********.So I was thinking about machining a flywheel puller to mu Fe400 '03 on my latche.The stator is fitted to ignition cover. Anyone got a...

anyone kno the pitch etc of one of these and whether t's the same as a.... etc etc. i need one PDQ. BTW, this is the modelwith the flywheel coveri the stator. regards Taffy

hi, i am having trouble getting a spark from my FE400 2003, the statro has come back tested as fine, the flywheel was couated in crud, well a very thin layer of crud on the magnets, i have cleaned this up and when doing so i have noticed of the 3 ignition magnets only the two smaller ones...