find

I have my engine apart at the moment to fix the result of a stuffed cam chain tensioner (no tension on chain, chain engraved it's name on the casing and chain is now rooted). While i was taking a precautionary look over everything else I could see, I found something that was a bit of a...

so, the bike: fe450e,2006(model 05) carb/exhaust and etc. standard (56hours) prob: bike chocking or stalls in quick throttle opening on idle. from 1/8 of throttle to mid/high - ok, but backfiring/poping, exhaust glowing red. tried: carb cleaned.needle clips was tried from 1 to...

i have a tailpipe that i realy like made by MBS. i sold the first a year ago and the second one has a 20 degree neck missing. it's also missing the body clamp which i reckon i can find a universal one to fit. does anyone know where in the world i can find MBS nowadays? these tailpipes...

I am looking for some atomizer and pilot jets for my Dellorto. After talking with Motoxotica he recommended me calling Herdan in Pennsylvania. I am having no luck reaching anybody there and they never call back. Time to move on. Does anybody know where else I can get jets in the states or should...

http://www.husaberg.org/wiki/index.php/ ... arks_wrong well, no excuses now you numpties! go find TDC and sort this out - FOR GOOD! regards Taffy

Classic story, A friend of mine had a 520SX in SM trim and wanted more motor - got a 525EXC in SM trim and it wasn't enough - had a deal on a hbg 650 but got a better deal on the 07 550. Now I rode his 550 and it is a fine bike and handles very well but he took a ride on my 650 and now the...

Where is the best place for aftermarket or orginal body panels for a 1998 fc501? of course price is a concern. UFO? acerbis? or ktm? thanks

OK, I used the search tool extensively and armed with my wiring diagram I tried tracing from the turn signals to the flasher relay...but I'll be damned if I cannot find it! From the back, the turn signals go up the frame to a 3 contact connector just under the tank, just like my trusty wiring...

i came across a 1995 Husaberg 501, its in pretty bad shape and i thought it would be fun rebuilding it. but i'm having a hard time finding part for any price. does anyone have ideas of places to order parts or other simular bikes that parts might work? i've been told that some KTM parts will...

Hi, all. Guys, is there avayable new FS 650C anywhere in US? Actually i need even two. 8)

intrigued? what's happening at mattighofen? i suggest either barrets had had enough or that ktm have found their system to work elsewhere in the world. a system in which ktm import the bikes and the parts come straight from the factory to the dealer. the difference as i see it is...

trying to find out what forks/rear shock are fitted to my bike so i can adjust/clean replase parts when i need them its a 2003 650 fe i no they are *********** units but which ones?

I have a '98 f/c 501 and am looking for an aftermarket pipe for my bike. Any help?

hi im also having a real hard tim findin nuetral while the engine is running. any advice :roll:

O.K. try not to laugh...I got my 'berg going tonight after extensive assembly and repair. I let the 'berg idle a few minutes and went to shut it off with the kill switch and she lit me up real good. I haven't checked yet, but I am assuming I either got a wire misconnected, or lost ground. I will...

Hi Folks I am in need of a set of 27mm exhaust valves and 30 mm intake valves I also need an exhaust rocker for the same bike. 1995 350. Motor ser# says 1992 as manufacture date which has 10 mm rocker shafts. I have machined these out to 12 mm so new rocker will work. I would even be...

Heres a good one.On the 2003 FE450e(the preproduction model) we have had two headgaskets fail at the rear of the cylinder.The first one we put down to a freak incident and the second one failed in a matter of minutes in the same spot. Upon closer inspection it was found that it appears the...

I know this has probably been answered a thousand times, but if you would be so kind. I have a 96 or 97 FE600E with no liturature, I know no one else who owns a Husaberg, there is no dealer in Ohio (that I know of) the Husaberg website says there's one called Chicken coop, but no good number. I...

I have a topic in the wanted section already. If nobody can come through where can I find a seat? I have a ride planned this weekend and I need a seat fast. Does anyone sell new seats?

:D Been trying to contact Ricky Bozarth of "Bozarth's Offroad Service Specialties" with no luck. :hathat31: Oh wait, I think I've spotted him but he looks a little busy at the moment. I'll try back later................. BOSS :D Logjump