fe650

Looking for info on performance and reliability upgrades for the FE650. I am currently running an Akrapovic muffler. How do I tell if the head pipe is Akrapovic as well? Anybody used these guys performance parts? Use the arrow slide inside the central box to see all the trick parts...

Will any over kick start shafts fit a fe650 03 I can't find 1 And I am not paying 312 pound plz let me no or no any one that breaking one or where I can get one from thanks

Dose any one know where I can get a kick start shaft because mine have snapped or a full starter motor set up ... I can get a full starter motor set up with all cogs and wires off a fx470 2001 the parts look alike but I really don't plz help thanks luke

Hello folks..update and another large arrow to point me in the right direction... After meeting my fellow inmate taffy on friday I've manage to fit uprated clutch...clutch works sweet now...also fitted kick start mod..(chippys chisel great tip)..i can now feel the engine spinning...whilst rad...

Hi folks Im steve from suffolk and a total novice to off road riding so naturally got a fe650 for my first bike.. 8O ...been riding road bikes for a few years but now been drawn to the darkside... Basically the clutch is dragging when in gear so guessing plates are worn and need replacing..is...

Hey guys, just got my 650 engine back together yesterday and it was running like a champ, was a hot day and the fan was running alot of the time, I stopped one time during the middle of the ride and from then on I had lost the battery, the bike still kickstarted fine and all the electricals work...

looking at rebuilding my beast and wondering what aftermarket kits/parts are out there. any info would be great. have seen the big bore kits talked about and seen a bike with twin pipes on this site

I had read that these were all stainless steel, does anyone know what grade? I pulled mine off and cleaned it up yesterday, it didn't look stainless to me after I sand blasted it, I cleaned it up with scotchbrite and just had a look and theres patches of surface corrosion all over it...

I keep blowing head gaskets on my 2005 FE650. Does anyone know of a copper or other high quality head gasket that is available in the USA? If not, I will order from JBS.

I just replaced my head gasket and timing chain on my 2005 FE650. After adjusting the valves, I left the inspection covers off while I cranked it to make sure enough oil is getting to the head. I did not see much oil. On a Japanese bike, oil would be spraying out. I think this bike is oiled...

So I just dropped the oil on my 08 fe650 and noticed a fair amount of alloy in the filters, it's sitting on around 270hours without the engine ever been opened so I'm instantly thinking the cam chains starting to slap around? I'm running a scotts stainless filter and I cleaned it and the tampon...

hey, so i bothered to put up the goproes and had a friend recording me on my beloved husaberg the other day. tell me what you think ! [youtube:13v59u22]http://www.youtube.com/watch?v=fCaONCBFYPQ[/youtube:13v59u22]

hey, im Gøran and im new here. i just bought a husaberg fe 650 and i love the bike, but i have one problem. i didnt notice it at first. but the bike gets engine oil from the engine breather hose. this only happends when i drive it hard or does max speed, after i go max speed i notice straight...

I noticed my 650 Supermoto handled very well off-road and decided to try a larger front tire to make it even better. Shinko makes a 120/90-17 for about $60 which increases the outside diameter towards the 19" wheel size used on flat trackers, plus it has a much wider profile. Front end traction...

Hello, I just picked up my third Husaberg 650 here in CA. I have two 2005 FE650s. One plated, one green sticker. I just bought another Ca. plated 2006 FE650E. It has 93hrs and is in excellent condition. Not hardly a scratch on it and only in the dirt a few times. I'm very happy with it. It has...

Hi. Not long ago I bought a 2004 FE650 and I've fixed a few things, brakes, electrics, etc. One thing I've noticed is that the gearbox seems stubborn and clunky; sometimes its hard to change gears and neutral is impossible to find with the engine running. I know some people say 'that's just how...

Hello, i have the chance of some ktm wheels and tyres from a 125 lc2, i think around '98, from the info i can get they are 21 3.00 front and 18 4.50 rear, i think the axle size front is 17mm and rear 20mm? can i convert the front up to a 20mm axle which i think i need for the front of mine, my...

Over the winter I sent the clutch out of my 01 fe650 out to Gary at EFM for an auto clutch conversion. The turnaround time was very quick and the clutch came back looking like a work of art. Instructions were clear and the instalation was very simple. I was told I may need to do some grinding on...

Hello, i have a 2002 fe650, put new bulbs in and as soon as you rev it, they blow, looks like the regulator?? are these repairable or do i just replace? thanks

I'm a returning trail rider after many years on the road bikes and have lost a lot of my bike savvy knowledge. I'm on an '06 Fe650 (monster of a bike btw) and I'm interested in doing full-day or even weekend long trail rides. A mate of my old man ran a KTM dealership years ago and has commented...