fe450

wrestling with finding replacement clutch parts for my 09 fe450 and I’m wondering if my inner clutch hub is genuine Husa or did some yuck monkey repl it with something he found on the side of the road. OE part diagrams show a 4 spring hub, but it doesn’t look exactly like what’s on my bike. see pic.

I'm selling my FE450, I'm the first owner. It runs great, 179hrs, 3061 mi, pink slip, greensticker, asking 2700$

Just ordered a full rebuild kit for my forks. What oil height should I aim for? Can't seem to find any relevant info on this topic. Besides that, anything I should particularly watch out for? Thanks

Hey guys, I've been looking at older threads for breather hose mods but I failed to find any pictures as these threads are quite older now. So bottom line, can someone provide some pictures/details on how to setup these mods? I'd like to see how you go about these. Also, did someone mod the air...

Hi guys I am back, I have another question regarding my 2004 fe450. Can someone shed some light on what my problem might be. So when I go from idle ( stand still or descending a hill under load etc ) and open the throttle quickly it wants to and sometimes does stall. If I tweak the throttle...

Hi all, Bought into the Husaberg family with a 2011 FE450, to be able to ride with my son and his KTM 400EXC. First ride and I went down hard, handle bar in my eye and almost lost it (the eye). Clutch lever broke, and the master cylinder was leaking profusely. While the eye has healed since, I...

2010 Husaberg FE450-STREET LEGAL!!!!! Tagged and Title in Florida-Title in hand. May not be familiar with the name, bike was built by KTM. It is an absolute beast, great power and handling. Runs and rides great, no issues at all. It is a great woods, trail and dual sport bike. I purchased it...

Sold

Hi all, just acquired a 2007 FE450E and have drained the oil to fine lots of metallic filings. Thought I may as well rebuild the whole lot but can’t find a kit, anyone know where to find them? I’m in Australia Thanks for your help

Hi, I have recently purchased an 09 fe450 and am experiencing a clutch issue. I previously had a fe501 which I sold a little over 10yrs ago and am just getting back into riding. The problem is that the clutch is dragging alot especially when cold. I have read alot of posts about re-bleeding...

Hi everyone, I have a FE450 and just wondering if anyone has had a similar issue as me. Rode the bike on Wednesday with no problems. Just went to start it now to go for a ride. It has no spark and can’t hear the pump prime either. All fuses are good. Battery was a little bit flat would this...

hi guys out at the weekend and my friends 2006 fe450 wouldn't quite fire back up after we stopped, eventually we got it going again but it didn't want to idle and was shooting out big yellow flames. we decided to call it a day after being out in heavy snow and managed to ride it home, he's...

hi guys, my mates got an issue with his fe450, basically all was well until his main crank bearing went and had to have engine rebuilt, it put a hole in his stator case. he got the bike back rebuilt but we quickly noticed it wasn't charging battery so battery being old we put a brand new one...

After 265 hours the 70 degree started burning some oil due to a leaking valve seal. My machinist actually also mentioned the valves and rings were a bit tired as well so I decided to do a refresh. Some pics of the progress...A Wossner piston will be used along with a JD jetting fuel...

hi guys my mate has snapped his tps on his 2004 fe450 carb, its the tps with 2 screws rather than one securing it. were desperate to find a replacement In the uk before this weekend if anyone Can advise where we could find one. we've had it disconnected although it already was being snapped...

Hello. I just got my first husa like a month ago. It was running fine, expect little noise at the idle rpm. Didnt wonder about it too much. Then the bike got engine stuck while driving with full throttle. Got it home and opened the clutch side. The timing chain was loose. Got the chain...

Is anyone still making these? Sent from my iPhone using Tapatalk

I bought this bike for my wife 09 fe 450. While chasing an electrical problem with the headlight, (bad ballast) I noticed this component had a broken wire. I'm either skipping over it in the repair manual or its not there. Anyone know what this is?

Hi I have a problem with My husaberg fe450 2010. When they motor is hot it have problems to start . O clean inyector change filters they pump run and give 3,5bar of pressure, check de wire...... Some idea? Thanks sorry for my Bad English

I have a good used Omero fuel tank. Had it installed on my FE 450. I do have a black set of plastics that were modified to fit. The tank has its petcock too. I do also have a new plastic under the seat auxiliary fuel tank also. Make offer.