fcr

Just bought a 40mm FCR off a 05-07 RMZ450. Very clean and looks to be in great shape. Hot start cable included. Been digging around trying to find an intake that will angle the carb to the right side getting it away from the exhaust. I'll look for an add on filter and plug the original hole in...

The Keihin FCR-MX Carbs are notorious for having this plate wear / crack / rattle etc.... To buy the plate and the seal is an excercise in frustration when it comes to the pricing that gets quoted around the place. The way to go is this: Buy the Honda 'kit' which comprises the seal and the...

Ok.... I've searched for some different things but was unable to come up with anything conclusive. The bike (98 fe400) ran with the Dell orto previously. The bike only runs on choke. As soon as I shut the choke off the bike does too. I have assured the slide is in square side down. I have...

Hey guys, I picked up a sudco FCR41 Carb kit for my 99 501. Hoping to put it on this weekend. I was wondering if anyone had some jetting recommendations? this is the non MX model carn. Just the regular FCR. I need to pull it open once it gets here and see how its jetted already but. basically...

Hi. I have little problem with jetting my carb. So i have main jet 175 Starter (choke) jet 65 Pilot jet 42 Main air jet - 200 Pilot air jet - 100 Bike starts bad, i use hot choke, turns with e-start 15 sometimes 20 when bike is hot. When is cold, start better, but not so good... yesterday i...

hey on a fcr carb there are two choke levers, one red and one black. I presume the red one is hot starts and black cold starts. I am correct?

Guys, I have an 05 FE 650 converted to SM. It has a full Akro exhaust and I never changed the jetting but I do have the ez adjust fuel mixture screw. My question is...Do I automatically go up in jet size because of the exhaust or do I try to adjust with the fuel mixture screw or both? How do I...

Im going to bore my 41ml carb out to a larger bore, Any tips or advice appreciated from those who have done this to there carb? thanks in advance.

I have a 1995 FE501. When I purchased it, there was an annoying off idle richness, so I took the carb apart and found the needle was very pitted. I then purchased a 37mm Keihn FCR off a 2002 YZ250F. Jetting specs are here http://www.thumperfaq.com/wrf_vs_yzf.htm The carb works great, the bike...

hello everyone . iam hopeing someone can tell me what iam doing wrong !!!! 650 berg 02 eng 04 frame fcr41mx with choke an hot start ! ive cut 5m off inlet rubber boot . carb fits nice but only without brass fuel inlet pipe ???? even without it there only 3mm gap between carb an exhaust . the...

Guys, What year and model bergs had 39mm genII cards with TPS? Thanks for info

Lets share I'm in the process of instaling one FCR in my 02' 400, in this I'm having some difficultys, one of them was all that wiring and the starter relay. So, because we BERG owners are a bit special (crazy :mrgreen: ), I've decided to change (again) all the wiring to the other side of the...

Hi ! I found 39mm Keihin FCR with t-cables and t-cam for about 88 GBP Question ? Is it worth to mount it to my FE400 ,i read on forum about the benefits of it but the jetting gives me a creep 8O .

Hey, I installed the jd kit for low elevation and now my 41mm keihin is overflowing like crazy when I turn on the fuel...any suggestions?

I just got a 470 husa and I thought it would be something close to the 05 FS 450 i had. I am not impressed at all with the power, I think it feels like a late model 250. can i get a fcr 39(i have an extra) on there for more power. what else can I do to make this bike move. I have a 560smr for...

Thinking of doing the conversion from a Dellorto carb to a Keihin, anyone have thoughts on this job? Which would really be a better carb and be easier to start and runability?? Thoughts?? Advise on issues please....Thanks

I'm thinking to change the Dellorto carburator in my FE400e '02. Can I fit a FCR37 of Yamaha WR250f 4 stroke 2001?

tell me o knowledgeable ones... i have a fcr41 mk1 on my old 01 fe650. i have always had trouble starting the thing when it has been flooded,for instance if i layed the bike over on the side of a hill. starts not a problem,1st kick hot or cold,but flooded not a hope of getting the thing...

Hi all, Came across these galleries with high quality photos and info on the FCR Carbs. It's JD Jettings gallery, but open to anyone. http://www.pbase.com/jdjetting1/keihin_fcr_pictures http://www.pbase.com/jdjetting1/keihin_ ... ews&page=1 Old news for some ?? But i liked it, and it's...

hi ! i have a big problem to find a jet to my cab. the jet i am looking for i the pilot air jet in the front of the cab ... the size i want is 50-55 if someone can give a tip where i ca find it, that would be great ... best regards daniel