failure

I reported earlier that what I expected to be failed rocker arm rollers making an odd top-end noise turned out to be a shredded water pump impeller. I've finally had a chance to look a little more closely and what I'm seeing is perplexing. The remains of the impeller, new about 100hours...

Finally got a chance to pull the rocker cover last night to inspect the failure. What I found was a bit of a surprise. The rockers are in excellent condition with no detectable wear. The noise that I assumed was one or more failed rollers turns out to be a water pump impeller that I took out...

Hello Everyone, I am an infrequent visitor to the site so I'm not up to speed with the latest. At the end of a 100mi ride saturday, I heard some unusual noise from the top end. I haven't gotten into it yet but suspect I've lost the rocker arm needle bearings again. I changed them about 120...

hi all, i am not riding my 600 for 2 weeks now due to failure. it starts really easy by 1 or 2 kicks but it runs and feels very week-poor-unstable (note that it revs all the way). it backfires after 1 or 2 minutes and dies. just like when you have air leak from somewhere. i checked it and came...

Regarding the Baja 1K Husaberg USA entry: As you are likely aware I built and modified a 2004 Husaberg 550 engine for Bergdaddy. Said engine failed. Upon disassembly and inspection I found the following: Two very bent Lineaweaver 32 mm exhaust valves as a result of: a new OEM heavy...

Hi everywhere in the world, sorry about writing in german, but I was tempted to answer in my native language. The first problem of Husa98 about the Husaberg logo for his mobile phone was solved. It was easier to explain it in german. In the other post, maichusa, a member from our...