failure

I am a newbie and have read through every thread I can find on this topic and saw a few YouTube videos. I was so excited to get this bike and before I could even ride it noticed the oil was milky. I have a few questions that have not been answered in the threads I have read and the videos I...

I could use some help working to get my beloved 08 Husaberg FE 550e back on the road. So what went down today was, I was riding down the road and I noticed my engine seemed to be bogging down, shortly thereafter it died. As I tried to restart the bike I could hear a nasty banging sound. It...

As our bikes age this seems to be a possible issue that causes a lot of tail chasing . It has multiple symptoms that could have you thinking fuel injector, fuel pump , fuel filters . The husaberg OEM can be replaced by NGK VBO5E NGK part number 8408 Symptoms: flame out as bike is...

Hi bergsville, I'm on a bit of a mission to find out if the problem I experienced this weekend is a common fault or not. I had six different blokes in the forest telling me that my stator had packed up when my TX300 wouldn't start halfway through a trail ride event. Is this a common...

Cash drive Vs counter saft failure. The Moxsprocket cush sprocket Earlier This month New Zealand company Motomox released to the public their Moxsprocket. It's a cush sprocket, that has been undergoing hash testing over the last 12months and has performed exceedingly well. The it's a high...

Road riding and Cushdrives V's counter shaft failure Hey guys we know that our bikes are prone to counter shaft wear, and many believe that the issue of the soft counter shaft can be elevated by the addition of a crush drive hub. A new rear wheel is costly (though most of you probably already...

rode with my buddies who have KTM ex 350 and doing some tuff, slow single track there fan was working and was not, when i got home notice my guild is low. obviously i have been overheating and boiling the antifreeze, ! hoe do i check to see if my thermostat is working, and fan? webfoot...

OK here are some photos of the remains of my engine. I had an issue with the oil pump and some sand that got in there....

So I was having a charging issue 12.1 to 12.4 volts with the headlamp off. Trouble shooting the usual suspects with my mechanic: 1. Quick wire inspection - Reg/Rec replacement - no change 2. More thorough wire inspection. Connectivity tests and grounds check - a bit of a fiasco since the...

A couple of clips of my november enduro driving. It's ok to feel sorry for the bike... :cheers: [youtube:4two16m5]http://www.youtube.com/watch?v=k6S-643Yo9o[/youtube:4two16m5]

Sorry for my bad english , but feel free to ask if there is something you don't understand. Bought an almost brand new 2008 Fe 650. It had 8h on It when i bought It and was in mint condition. On the last ride I started to hear a rattling and knocking noise from the clutch side of the engine. I...

Hello, I have a small problem that my free wheel hub (800.40.025.000) lost couple tooth for the second time during last 40 hours, so I have two questions: 1. How to avoid such failure in the future? 2. Can I remove free wheel gear with all components and use my bike with kick starter till new...

The fuel injector on my 2011 FE 570 failed this weekend on the first day of a 4 day ride in Beg Bend. I had ridden about 70 miles and suddenly the bike started popping and sputtering. I pulled over and put gas in it as it was acting like it was out of gas. It started up and as soon as I tried...

merry Christmas need to test generator can any one help. efi has failed no fi light bike turns over does not start . checked wire loom all ok . every thing is dead . thanks

This pump is on a 2011 ktm350 probably what is happening to the pump on the bergs.(the 2010 and 2011 i have owned have never had a problem just thought i would share the vid I found) http://www.youtube.com/watch?v=sedEgE_BK2k&sns=em

Hello Group, Well, took delivery of a new 2011 FE450 on May 12/11, and after 2.6 hours of riding over three days, the fuel pump failed. Dealer now says pump is on back order, ETA approximately five weeks. The pump failures are being blamed on sediment from the fuel tank bonding process...

All, I mentioned briefly in the Nathan Woods ride day thread that my fuel pump had gone out during the ride. Well today I was able to find the problem and fix it. I had first checked to see if I was still getting voltage at the plug for the fuel pump, which I was. Once I got the tank off I...

I dropped my shock off at the shop to have the oil changed. I’m told that when he opened the valve to release the nitrogen, a geyser of oil shot out. He said that the oil and nitrogen were completely mixed and that he had never seen that before. The piston was plastic and a bit deformed. The...

Gidday, I was lucky enough to go to a Shane Watts riding school this weekend gone, and a mate of mine with a 570 berg (09) and I both had coolant boiling in the water jackets from all the slow riding and idling around. This was to be expected as it happened, on a riding school I did a few years...

My bike needs a new cylinder head and I am in search for a cylinder head, I would prefer info on where I can get new, but will consider good condition used ones. My bike is a 2000 FC501. Any suggestions are always welcome