electrical

Hello there , having a major issuse with my bike at the moment.At any more than half throttle the motor dies of and does the big back fire/loss of power act. When I first got it the bike was a real weapon,super quick/wheel stand in top gear ,etc.first race day of the season flew through most of...

i'm going to dual sport my 02 fx 470. studying the wire diagrams, i see the power for the lights comes from the unused yellow from the gen. it seems i need an additional regulator. the way the additinal regulator is wired is odd in that it looks like it could only use half the waveform...

Whats your favorite way of cleaning electrical connections where they snap together? Is the use of dielectric grease on all fittings a good idea or just on some?

Looking for electrical specs for the CDI, Coil, and Stator for a 2000 Husaberg 600. Can anyone help me? Thanks.

SEM ignition SEM's charging coil replacement Starting Problems 1995... SEM ignition stators SEM regulation problem Question about ignition coil General Ignition info More general info Rectifier/regulator problems Rectifer Charging Circuit (good reference for rectifier and regulator...

Should have been at the Moab Force ride last weekend - it's only a few hours away, but Lineaweaver Racing was "crafting" my Dellorto in CA....... I was "jonesing" real bad. So.... I started cleaning the stator area on my recent purchase 2002 FE501E and there is just the start of rust on some...

History: I bought a 2001 FE400E from new and about 1 year into owning it I had all sorts of problems with the e-start not working. I did all the normal things listed on the forum - valve clearances, improved grounding of the battery etc. So, I updated the battery to a Yuasa YTZ-7S (more CCM's)...

hello all i recently bought a fc 470 that only has 1 ignition key and ive managed to lose it. im going to get another ignition or maybe put a switch hidden out of the way,anyway could anyone tell me the wires i have to join to do away with the ignition so i can ride it for now as...

well if you're wondering why i've been quiet lately perhaps this you'll understand why today... i started my racing season last weekend by entering the opening banovallum meeting up in lincolnshire last sunday. the bike started straight off off the trailer but after a siting lap - during...

I have an '04 FS450E and I installed the euro harness so street lighting would be easier to install. Well it didn't work out that way. The high beam is possessed and only comes on 25% of the time. And the signals (LED two wire aftermarket) have a mind of their own. When I switch the blinkers...

I wanted to know if any of you have used this and what do you think of it. It is made by Star brite. I know it has more uses than just sealing and water proofing electrical connections the list could be very long. What do you think?

My 600 lost all power to the lighting system (i.e. head & tail light, turn signals, horn), whether the motor is running or not. Electric starter still works and the motor runs but everything else is dead. Any suggestions what the probelm may be? Any help is appreciated. Thanks, Daryn

A wire came off the ignition switch while I was riding. I some how crossed the kill switch with the hot. Tried to start it and did damage. All it does now is crank. I now for sure I fried the starter switch. The plug is not sparking and I'm not getting the correct readings from the stator. Can...

I have been a member on this sight for a couple of months and have learned a great deal from many helpful people. I seek knowledge the same as everyone else here. The problem; I feel, is we all want fast easy solutions to our problems. That is one of the great benefits of this sight! We hope...

This is an odd story but true. My 03 FE 400e has been working great and have diligently cleaned and dried the Stator/rotor regularly. Was out clearing and preriding part of the trail for the Two Day Ride near Algonquin Park in Ontario Canada, and was caught in a particularly nasty section when...

I need to take my bike apart to check out pretty much everything. It is right now totally unable to start and I need to check it all inside out. It's getting ridiculous. This thing needs to be overhauled in order to run. The owners manual does not explain specifically how to remove the...

1994 501 FE Does anyone know what the purpose of the Blue wire that runs from the Stator to the voltage regulator is this a power lead or a ground ? Thanks John

Hello everyone, I have a question in regrard to my 1994 501 FE. I am in the final stage of a street motard conversion on the FE and my current project is wiring up the burg to meet DOT standards. The FE has OEM wiring for Head and tail lights that run straight out from the stator, Last...

Hi everywhere in the world, sorry about writing in german, but I was tempted to answer in my native language. The first problem of Husa98 about the Husaberg logo for his mobile phone was solved. It was easier to explain it in german. In the other post, maichusa, a member from our...