drive

Hi All, Have a FE550 and want to replace the drive chain. I have a 16 front 40 rear, not sure if thats the right setup. Looks like i have a 112 chain length.? Can someone out there give me a clue? Thanks

Hi guys! If you have cush drive wheel what you want to get rid off, let me know. I live in Europe. Juha

Hi! I'm a 5 days old Berger. Starts to get a feel for my FE550e from 2006. Love it! Thing is I will be running alot of miles. already 6 more hours on the clock from the 78 when I got it. I need a chush drive! Sorry if I'm missing it, but I've been searching this forum and it's so much...

Anybody got a set of drive plates for the above clutch? Went to install one I bought off this site and noticed the plates were missing (after I took the bike apart). RMS 826 is the kit number. Checked the Rekluse site and it looks like it's nla.

I have for sale a cush drive rear wheel. it was recently used on a 2004 husaberg FE 550. I think it was on a KTM 640 when new. it is in good condition and the rim is silver. comes with a rear brake rotor. also has a Metzler Karoo tire in real good condition on it. $200 plus shipping. any...

Cash drive Vs counter saft failure. The Moxsprocket cush sprocket Earlier This month New Zealand company Motomox released to the public their Moxsprocket. It's a cush sprocket, that has been undergoing hash testing over the last 12months and has performed exceedingly well. The it's a high...

What bearing do you guys use for the balancer drive shaft? OEM is 6905 J1LLUC3 The bearing agent has informed me that this is a 'special' bearing rated for higher speed, and he cannot supply that bearing. Also, there is no 'normal' 6905 C3 sealed bearing he can supply me with. He can...

About a year or so ago I destroyed my kite (non cush drive) hub because sprocket bolts came loose. I temporarily fixed it by drilling the oval 8mm holes to almost 10 and threaded the holes now I can still use the hub. Downside is I also have to adjust al rear sprockets to make it fit and...

WTB: Cush drive hub or complete wheel for 2010 FE Looking to set up my 390 a little better for dual sporting. Let me know if you have something that might work.

As some of you know the 17 x5 inch cush drive rear wheel is not available anymore. At least in the US. They came on the 05 bikes. What you can get is the 4.25 cush that the 06 bikes came with. And my dealer wanted about $650 for it. There is another option though and that is to buy the 2005...

Cush drive - Do I need one?? Found a set of supermoto wheels for my 2004 FE450 The rear does not have a cush drive Is it OK to run without one or will I pile up my transmission Thanks Frank

In need of 36 mm x 1.5 mm drive gear puller. O.E . part number much appreciated. Thank you in advance Dale www.lineaweaverracing.com [email protected] 510 223-9052

Hi. I'm wondering, i'm using the FS 1-2 hours with no stop. Are this any problem for the engine?

I'm assuming i need a new drive shaft seal on my FE450 ?

Hi All Finally got my nephews bike running sweet (10/02 FE501) when cold it sounds a little bit timing chain rattly but goes well, when its hot after 20 min or so it starts to lock the final drive and sounds shocking and will barely move under power, its only started doing this the last few...

Hi im needing a new chain for an FE501 2003 model. Ive counted the links to be 57 plates on the outside including 2 split links (YES 2!!) Ive never quite got to grips with how to count a chain so what length should it be running? It has a 48 rear and either a 15 or 16 front I have both and was...

Hello, I was wondering if anyone knew if a earlier ktm or husqvarna or other speedometer drive gear that would work on my 1997 berg. i am having poor luck finding a used one and would gladly pay for a new one (or used from something) if i knew what might fit my axle. I drive on the road alot and...

Sorry if this has been asked before but while I can see things that suggest an answer I couldn't find anything definite (be gentle with me - only had the bike since last Saturday). Can you fit a normal X-ring chain (e.g. DID 520VX) to the 2010 FE450? I ask because the chain supplied with the...

Can any of you guys tell me exactly what it is? Make, model, and # of links? The bike I just bought has an RK520EXW and it's too wide; it touches the clutch slave cover. The previous owner installed it and never rode it. BTW-Anyone want to buy a new chain? :) Thanks!

I can't seem to find the proper chain length for replacement on a FE650, I think its a 520 x 120 links. What is the best chain for desert use? I have been told that o rings aren't not worth the money but i find that hard to believe. Also is DID or Renthal the recommended chain?