crankshaft

Hi guys i got a 2009 husaberg FS570, after 2 weeks of riding it wont start and the EFI light blinks twice short which means the crankshaft sensor is off, BUT i cant seem to find that ******* anywhere in thee part list or on the whole internet. Is the crankshaft position sensor just the...

HELLO! Got my first Husaberg:) I Have a Berg 470 2002 and need to replace the crankshaft bearings. Read a post here that these should do the job?: NTN NJ206 ET2XCS46 Does anybody know if these fit...

Looking to fit a big end in the JBS crank and will probably use a OEM kit, the conrod fitted is a XT600 item. Looks like the Hus conrod may be slightly narrower on the big end pin. The motor was running with a balancer but the crank web doesn't have the pinhole oilway that a standard crank...

There is plenty of information throughout this site relating to checking & setting crankshaft end float on 01 to 08 engines but i cant find anything on the 98 to 00 engines where a roller bearing has been retrofitted in place of a ball bearing. It is suggested that axial play on the 01 to 08...

Hi I'm rebuilding my engine, and have found what seems to be a crack in the crankshaft:eek: It seems like it has started from the woodruff keyway where it seems to be missing a little piece. I'm wondering if anybody else on the forum has seen something like this? For all I know, it could...

Hi there. I have a 2014 FE250. The crankshaft position sensor has failed catastrophically twice now. Once at 200 miles, and again at 400 miles. When it fails, I mean really fails... copper wires broken and spilling out of the sensor. Has anyone else experienced this type of failure...

hi. I want to change the crankshaft bearings at my fs 650 but they are too expensive. 130 euro two bearings by ktm. I am looking for SKF or KOYO but i dont know dimensions to call a dealer for price. do anyone knows dimension for crankshaft bearings or code? i want to change and the...

Bro's The mains on my 04 650 broke (snapped the boss off the bearing inner and jammed the counter balancer) motor ceased. I am looking for some advice from those that know. Here is what I have measured. End float when assembled (50hrs ago) 0.45mm. with the factory shims removed. (I know...

Hej guys, What side does the shaft seal of the crankshaft have to face? The spring facing the inside (crankshaft) or the outside? husaberg fs 570 2010 Much appreciated!! Yovan

Do anyone know if a 1999 Husaberg FE600E crankshaft would fit my engine? Ketil

Hi, I got a 2001 Husaberg FE650E and the crankshaft has gone. I was wondering, I mean, I've heard people talking about a possibility to get a 2008 crankshaft kit for my engine? Anyone knows? And where in Europe are parts cheapest to buy? Regards, Ketil

I'm in the process of rebuilding a 2010 FE570 and need to replace the conrod. The part no. for the 2010 complete crankshaft is 81730018400 and these run at $1000, the part no. for the 2009 is 81730018300 and I can pick one of these up for $600. does anybody know what the differences are and will...

Yesterday my mechanic opened my berg. he told me that the main gear next to the crankshaft is broken and it has broken this one as well. considering a replacement for the crankshaft, the piston, the gasket and bearings (plus the work) it will cost about 1700€ (2500$) to fix it

Hello again, more questions. Another question about specifikations for my Husaberg FE 501 -99. The crankshaft width when disassambled was 65.4 mm and i am not shure if that was ok. Connection rod to crankshaft side clearance is 1.7 mm now and crankshaft width 65.4 mm with new connection rod...

hi guys, i have a questiona nd was wondering if anyone could help. i have a fx470e which i need a crankshaft for. will the FE/FC/FS 2002 470 crankshaft fit my bike? thanks, denzo

:D Just had my crankshaft reworked by a top bloke Sean Wilson, speedway guru and head dude at SWR, he fitted the new rod kit, finally after messing about with incorrectly supplied small ends from outside sources (obviously our fault) and then drilled and balanced the crank to 70% as recommended...

I was looking around the forum and saw some mentions about crankshaft balancer and rocker arm problems. Is this something I should be worried about? The bike runs great and has been well maintained. I am just wondering if there was a problem would it be obvious or just break and screw up the...

Does anyone know how much oil ,either quantity or height is present in the crankshaft cavity at maximum rpm on a 550 engine.As well is there a spec for how much oil in cc's per minute is fed to the main bearings at max rpm. ... thx

Pressing crank halves together and not sure where measuerment is taken from the picture description is not that clear in my manual. Is it fom the outside of the halves? measurement is 61.9 to 62 mm according to specs.

Hi all. :) Whats the go with the new generation Berg cranks ? As JBS has previously made us aware, the 06 650 gets a new crank with the 35mm pin- This is the 3rd design change since 03, and a well deserved move. The 450 also sports a different crank for this year judging by the part...