compatibility

Hello Husaberg community! My name is Tristan and I am from Washington State, USA. I have a 2003 FE501 that I bought a little over a year ago with ~50 hours on the clock. I put about 10 hours on the bike and it ran decently, but while jetting/tuning the carb I was doing repeated WOT runs and she...

Hi Guys, Searched for this but can't seem to find anything! Whats the deal with 650 Berg Exhaust? I know we can get most end cans with a 60mm inlet to fit on my akra mid link but ( i don't have a standard mid pipe to know the inlet size!) But is there a complete exhaust system that will...

Hey all, so I've been putting quite a few miles on my 2008 fs450 and love it! The only problem is its going to be hard to find parts for it when something goes awry, and it's got me scared to ride it too much haha. I really don't mind wrenching but I'd like to be able to get the parts to wrench...

Hi, I have a FE350 2013, and I want to know if the full husqvarna 2015 plastics fit on my bike. Thanks

Exhaust central Manifold Compatibility husaberg 2009+ FE vs FS Hi everybody By looking at the number of the central/manifold part, I realized that there were 4 ref no ..... For the 390/450/570 FE: EU model with lambda sensor: 81205008000 US / AU model without lambda sensor...

Husaberg FE 09-12 plastics adaptation Hi Bergers :), Everyone one has cheap aftermarket plastic kits (acerbis, polisport) but us. I can see that you can find newer models though (image below). Now here is my question: Are they easy adaptable on our 09-12 bikes? But my bike is...

Hi! I have bought an old ('99 I think) FE501 bike, with the rear shock missing and the swingarm broken. Dont worry, it was dirt cheap :D but I would need those parts though. Are there any other models with compatible rear suspension? I heard that later Berg and KTM models share the same rear...

I've got an 02 FC550 with a duff stator, but also got an (apparently) good one from an FE550 (similar year). Do I NEED to change the flywheel too, or will it work as is? It fits in there ok- I'm guessing/hoping it will work, just have no charging circuit? Thanks.

Hey guys. Picking up my first Berg this weekend. It's a 2011 Fe570. I have several KTM Rfs bikes in Supermoto trim and I plan to swap the dirt suspension and wheel set up to my 525exc and the Smr suspension off my 525 onto the 570. I know the forks and wheels are a direct swap. But will the...

I recently picked up a 1999 Husaberg FC600. It has the factory head pipes, but the previous owner fabricated his own muffler. Although he did quality work, the muffler is too short and the outlet is too large - it is way too loud, and just sounds bad. I picked up a Laser brand muffler off...

I bought a 2008 FE550 recently and it came with a set of supermoto wheels and a set of nice Excel wheels in what the previous owner called "dual sport size" - 19" front and 17" rear diameters. Apparently he preferred the feel of these sizes compared to the stock wheels. I'm thinking I may want...

I am looking for an OEM silencer for my 2013 Husaberg FE350 and there are some KTM silencers on craigslist in my area. Which KTM models/year will have compatible exhausts?

Evening all - well it is here anyway... I've just got a 550 engine slotted into my chassis which was recently occupied by a 650 - just got to the stage where I can fire it up. Both engines are 04 on kokusan ignition, but I can't be exact on the year (both race engines - no numbers). The 550 has...

hi all..my bearings fell apart in the rear and now im looking for the whole repair kit... can someone tell me simple....which wheels are compatible with my husaberg? its really hard to search for husaberg parts ,...ktm is more common... i need to know model and year so i can order perhaps...

anyone know off hand if the (2010) FE450 fork springs are interchangeable with the FX450 forks springs? thanks

hello guys, i would like to change my engine from my 2005 husaberg Fe 550 ,which is blowned up ,with a husaberg 501 engine from 2003 ,can you tell me if the two engines that i mentioned are compatible or not. i'm from Bucharest - Romania, and unfortunately here is very hard to find this...

I spent some time looking for the Akraprovic slip-on muffler for the FS, that one with the carbon end cap, and was having difficulties until I saw somewhere that this muffler in fact is the exact same as a KTM 450-520 etc. That got me wondering if I could go out looking for a specific KTM model...

Hello all, first post here and brand new to Husaberg. Just purchased a 97 FE501 which is decent but well used. Have a chance to get a 99 FE501 with much lower time and considering for a parts bike. How compatible are these two bikes? Can I interchange major components like the engine, body work...

Hi Guys, So I'm looking to buy a wheel set to fit my 97 FE400. I have a set of road tires on it now but would like to have another set with mounted dirt tires so i can easily swap them out when going from road to dirt. The rear is an 18. ANyone know a compatible rim out there that i can buy...

How can I find out if a husky part will fit my husa? Specifically I am trying to find out if parts from a Husky 500 MX will fit a Husa FC 501. I can't afford new parts and can't find used parts. I've listed this bike to part out but I would rather rebuild her. Any help would be appreciated. Bryce