check

I have serviced my berg several times and a while decided to shoot a vid of the whole process. This video is for the 2009 on FE 390, 450, 570 and the FX series bikes. Hope this helps newbies looking to try this for themselves. Cheers.

06 fe550 starts first kick when hot and ride pretty good then wont start cold and takes an hour playing with the choke and the air mix screw sometimes wont even get it going. sounds the same with it turned in all the way in and out,,,so what next after cleaning the plot jet and adjusting the air...

Hi All, I'm new to the Bikes (well since owning one as a kid) but got myself a fe550. giving it a good overhaul before its maiden ride (chain, sprockets etc etc) but have decided to check the valves and adjust where needed. Now I watched the vid on you tube (quite an easy process)...

Hi guys I just bought a 2010 570 FE and cant locate where to check the engine oil level.Does it work with a dipstick or one of the class indicators can anyone please assist Regards

http://www.motostrano.com/Warp-9-Forged-Supermoto-Wheels-Pre-Order-p/warp9forged.htm SUPERMOTO COMPLETE TUBELESS CUSH DRIVE WHEEL KIT What do you guys think? Heard they weight in at 29 lbs a set. Might have to order a set for myself.

Hi all I'm considering buying a 2008 FE650. I don't know anything about the pre-70-degree Husabergs, but I know there are a lot of members on this site who do :). I'm hoping to learn from the sages... Are there any problem areas that I should check on this bike? What types of...

Just a message to owners of models up to 2008, Ive had 3 instances recently of the stopper on the camshaft sprocket which the counter weight for the auto decompressor rests on whilst the engine is running dislodging from the sprocket and dropping into the motor. One was on my own 2007 650 FE...

Hi there im about to put my beloved bike for sale . I want to check the valves before i sell it and i have no idea what how many mm clearance there is supose to be . Is there anyone who know the the clerance? My english isent that good so bear with me :) Thanks for the help

Now that's unique http://www.youtube.com/watch?v=bAKXWJaTS4c

Hi, After putting about 40 hrs on my Fe570s I decided to check my valves. Never done that before... It's about 35 degres F here and I'm getting about .004 on all my valves. I know that I'm out of specs. But is it due to cold temp? Thanks! Duane

I'm on the fence about selling my 2008 fe 550. Just bought a house and have 2 babies so with babysitting and home repairs it is going to be collecting dust. Could let it sit, and get another one later or sell it. What is the going rate for these things? Its in good condition, 123hrs, street...

I just bought an 08 fe450. The valves were checked 30 hours ago. When should I check the valves again and how often should I do it. Thanks

Hi, I was checking axial play of crank on flywheel side, by pulling it out and in. Can it be measured like what I do on picture? I measure 0,6 mm, like what I was reading in 'doc, that is ok for 2 roller bearings. Do you know what type of bearings were used in FE501 2003, in spare part is...

KTM 640 Superduke that runs on water (Hydrogengas) No more gasoline :D http://www.youtube.com/watch?v=cg0XiApLPew

If they don't build (or you can't afford it even if they did build it) make your own! Check out my new TE 200: Hadn't had it on the trail yet but I bet it's gonna be a rocket! http://s85.photobucket.com/albums/k73/a ... g%20TE200/

I am getting ready for our annual 4-day spring break ride and I would appreciate some input on my suspension setup before I go. I am really new at suspension tuning and I still don't follow all of the terminology, but I am learning. * 2010 FE450 * I am an old man (+50) and do recreational...

Ok guys, I've searched TON and have actually checked my valves before successfully but am having some problems this time around. The bike is a 1997 FE400! The Problem - I cannot loosen the valves enough to fit a .10mm feeler gauge in. They valves are just too tight. The Process - I have...

had my 1st valve clearence check on my fe 450 /09 at 77 hours absolutely spot on i think i've done 12 oil changes in that time and i ran the bike in for the full 12 hours so i'm well pleased :D :D now i need to set my sights on an 2011 model :D :D :D all hail the bergs there awesome

this is a 2005 fs450c, 2 hours ride time showroom bike shipped from europe. $3100 are the problems with this year? is this a good bike? please let me hear your expert advice with this bike thanks. how do i add pics?

hi does anyone know if the 3 phase reg/rectifier needs a load on to show any voltage on the output.have got a 2003 fs650 with battery and starter removed.im trying to get the lights working and have the following voltages stator yellow /blue 15 volts idlig rising with revs red out of...