big

So after 3no. “old manâ€Â

interesting what can be done http://ktmtalk.com/index.php?s=20357669 ... pic=364750 I like this question PN is 820.30.000.144 :D very nice crank weight though.

Just a heads up the 35mm big end cage is silver plated. moreys heavy duty oil stabiliser isn't supposed to be used with silver plain bearings as I understand it due to (in) compatibility of the corrosion inhibitors with silver. the silver coating on the cage is very thin and designed...

just about to try and convert a 82mm stroke crank to 35mm big end pin. i would love to have had the most hollowed out pin ya can get. anyone anyone they can trust to guide me with info on that? regards Taffy

http://mototribu.com/competition/enduro/2009/wec/002espagne/wallpaper/originalimages/carlsson.jpg http://mototribu.com/competition/enduro/2009/wec/002espagne/wallpaper/originalimages/ljunggren_2.jpg...

Hello to everyone..I am looking to find 37mm inlet titanium valves for my berg...Please helpppppppp...

I just read the 450 shootout article in Dirt Rider and.... no supprise.. Husaberg 450 took it with ease.. It sets the new standard for future dirt bikes. Awesome!!!

ha! ha! you all viewed in thinking i was talking about the way this site is going. nope! while i'm here i'll try and save it from the loonies! nope, i'm on about a piston that would knock out the 450/470/550/628/644 by another 40cc approximately? 102mm bore. just a special...

When I bought my 600 it came with a blue larger gas tank he said it was for desert racing, anyway today I had to install a new carb to frame boot and changed the tank over to the big one. The bolt holes on the side did not line up with the frame but everything else did. Is there a bracket that...

:D The two of us have to do the job of breaking in our 09 450's this weekend! Report's will follow next week!

hi their just a quick question if big end bearing has play or is on its way out is it possible for the flywheel to rub againts stator and cause stator casing to break off were the stator bolts to it ? iv had to cases do it to me just by kicking bike up and letting it tick over {ITS A 05 450 FE}...

Gentlemen, Trying to put together a strong bottom end for roadracing. I have a 2005 FS650C with under 300 miles on it, including 90 miles on a 3 mile road course. The quick version to my troubles is the inner oil filter cap o-ring sheared when the previous owner installed it. A 3/4" (1.8cm)...

i have a crank stripped and the inside of the rod is more worn more on the fringe than in the middle. careful inspection shows it to be the cage scrapping all the way around the inside of the rod - obviously always going with gravity etc. the rod has given the inside cheeks of the crank a...

Finally got the CBR wheels machined, installed, and running. Added some color to the big BOSS tank as well. I am pretty pleased. I think it all turned out ok. Man that rear tire just fits in there. There is a bit of a trick to get it in! The decals are Avery industrial laser printed...

cheers for the phone call taffy it was much needed buddy i will try my best to get the motor over to you asap, once again a big thanks. all the best dusty !!! !!! CHEERS !!!.

For those interested this is a banner weekend for some of the Berg brothers... Jared Thomas riding a FE450 and the crew from Alberta/BC ie Fryguy and also Coffin are attending the ERZBERB Rodeo.. Also Dale Lineaweaver long time contributor on this site and Husaberg supporter has entered...

This past weekend I tried a KTM 250 2 cycles, as you know, I am a big fan of 4 cycles engines, I hate the noise, the smoke, the oil in the gasoline, but I have to say It handles just amazing, I am small just 1.73 cm and I weight 68 kg, I drove much more faster than in my Husa, I am really...

this is just a big thankyou to everybody that helped me get my bike home finally. Alex and Dave at DCR for the parts and information you gave and also for trying to take the parts to anglesey for me (trying because the idiot that was fixing my bike wouldn,t spare 20 mins on a sunday night to...

I have a 2005 FE 650 that I use to compete professionally in hillclimbs. I run nitrous oxide, and have the crank welded. I am looking to increase poweer and was looking at the 750 kit. I saw one about two years ago and the bike blew up the first run (Piston out the side of the case) I heard the...

hey every one, bought a 2003 fs 650 a week ago, rode it for 3 hours went to buy some oil and a filter and it seazed up on my way to the shop, what a bugger! the big end bearing melted, i have bought a repair kit with a rod, crank pin and bearing, but the crank halfs are slightly burred over and...