bad

I have a husaberg FC550 SM with a keihin FCR41mm on it. Cold it starts like a charm (2 kicks, no choke needed), but when hot i almost cant start it... Anyone have some tips for me? I have checked my valves by the 1/6th turn method and will post my carb settings tonight. I also have a Sparks...

F-a-r-k Me I wanna go home and ride my bike! Only thing worse than pranging your bike is well.... Picture # 1 is before failure of forward support cables. Loving life, loving my job... and picture number 2 after I took off and immediately felt some crazy ass **** happening at the back of the...

By Charlie Reese Politicians are the only people in the world who create problems and then campaign against them. Have you ever wondered, if both the Democrats and the Republicans are against deficits, WHY do we have deficits? Have you ever wondered, if all the politicians are...

Hello All, Here it is: 1. Going to do a oil change. I start the bike and wife calls me for a phone call. I get involved in a work call and 15-20 min. later remember bike was running. OVERHEATED TO THE POINT WATER WAS COMING OUT OVERFLOW. When I did the oil change the magnet which had...

Looking for the best source for a stator for my 01 470fx, I bought one new from motoexotica but it went bad this last weekend and left the bike dead on the trail.

The Bad 1st....bike came from dealer with stock DVT needle in the 4th clip, so before starting the much awaited " Gentlemen, start your engines" I decided to check what jetting I was starting with[ 178main, DVT 4th clip, 50p?, FS 1.5 out]...knowing that needle is green and lean I swapped for a...

santa- ho ho ho! passer-by- oh look little jonny, santa is saying hello! santa- ahhh hell no biotch! I was calln' you a ho ho ho! If I had only read this story, I would say that the "santa" was just making it up. But a about a month a go i read another that stated the company "weststaff"...

I guess my radiator cap did not do what it was supposed to do, because at one point during my last ride, the coolant got so hot (I was trying Motul Motocool for the first time and I will keep experimenting with it) that it blew out, but instead of going through the overflow hose, it blew through...

Hi All, This might be useful to some people out there, ever since I have had my FE550 04 the front suspension has been bad no response to small inputs riden on the road felt like a ridged front end. Every body kept saying they were binding and did all the usual things to rule this out still...

This is what happens when you are too close to the power of the mighty Berg! Sorry SteveS :twisted:

I just bought a used 2005 FE450E; only 39 hours. It had the, now standard, starting issues. I am not mechanically gifted. (I learned everything from working on my 03 FE400 and using this site. Taffy, thanks for the Doc.) I think what I just experienced may be of interest to new Husaberg...

I do not understand, but always KTM owners say and ask, why did you bought a husa instead of a KTM, I always say because I like it more, weights less, more comp oriented, the frame shape is ideal to lift the bike, more gas capacity,and because I want something different that is a good reason...

Check this out, these guys don't have any idea.. http://comegetyousome.com/viewvid.php?id=1807

I had to post this in "The Lighter Side" forum just cause it makes me laugh. I just pulled the right side radiator shroud from my 05. There are only three fasteners, yet each fastener has a different head requiring three different tools for removal! :lol: Makes me laugh just like when I had...

Ive been thinking it over for a while and its getting to me. :? The warranty engine (03 650) supplied to me after my initial 8 hr intake rocker fiasco came fitted with LHS roller, RHS ball. The question is, with that bearing configuration, how do Husaberg expect the crank to stay locked...

Took of the rocker cover, and just wanted to verify if the rocker assembly in my 2002650 is the older or the newer type? How can i be sure? How about the cam sprocket, i tried to scratch it with a screw driver, and i couldn't so i suppose it is steel and thus the newer better type...

I just got my FE 550 shipped from Germany ( bought on E-bay). It runs bad, runs idle for appr. 10 sec., then makes a loud "pop" and stops. It seems to be running lean, but sounds good mechanical. Has done about 2000 miles. I will give it a valve adjust, change oil, change plug, clean...

may have told a feww of you before but i race in east anglia which is that pregnant belly that hangs over london. in our centre there are realistically only three husaberg riders and the other two are from the next village. i haven't mentioned it but i've just done the last two weekends on...

Hi everyone, I am now almost at the point of getting rid of my 2002 FE 650 berg to get a newer version or possibly going 2-stroke again. It just won't start, not even fire a bang everynow and then. I even rode it down a long slope in different gears but it wont even make a sound. It all...

ive just bought a 650 and its recently been rebuilt, is there an easy way of starting it its killing my foot....??? :twisted: :twisted: :twisted: