aftermarket

Did someone find an aftermarket fuel pump that will fit into our tanks? I believe that mine may be going bad, and would like to swap it out to see if that is causing my issues. For those curious, my 09 450 seems to have a 3 hour failure switch. On the last 3 races I have done, I make it about 3...

Today I had my bike sitting on my lawn and the sidestand dug into a soft spot and the bike fell. The aluminum sidestand was tweaked and cracked around the bolt. Now I need a new sidestand. What do you recommend? Trailtech? Promoto billet? ??? TIA

anyone know if i can get these for a 08 450

i have an 2002 fx650 converted to a supermoto but im having difficulty finding an aftermarket race exhaust to fit it due to the different mountigs than that of a fe or fs does anybody know if there ever was one available or if im out of luck

Any after market plastic out there ?

Hi ya, new guy here. Just bought a 05 FE450. Just wondering if there are any good sites to buy aftermarket bits and pieces for my bike? I'm in Ontario and have in the past ordered stuff for my XR from places like Thumpertalk with good results. Now I need to find some sites for the Berg...

Wondering of anyone has found replacement axles with a pull handle ? Also do the KTM parts for a similar year cross over ? Any suggestions ? The bike is an 06 FE. Thanks in advance... Darren

Do the aftermarke pipes make much of a difference. Has anyone modified the standard pipe to get as good results (fe450 08)? What pipes have been used and how much do they cost. The akaapovic seems the most commone one, but I heard others are cheaper and better. Barret pipes?

I know I have seen an Italian web page, selling a very trick framekit for the Husaberg.. Can someone help me to find this site? Thanks!

anyone know a really good web site/company that sells kickstart levers - all shapes and sizes? regards Taffy

Greetings all, I have been in contact with a company that is considering the production of a larger aftermarket fuel tank for the 2009 model bike. This company, not Clarke, is mainly interested in what size fuel tank, but, I thought I would try and gather the info as to about how many would...

Anyone know the manufator is for the aftermarket alloy gearlevelser for pre -09 Bergs?

Greetings all, Just wondering if anyone has found an alternative to the 32mm OEM Husaberg crank pin and bearing yet?? No doubt if I spend enough time traipsing through the Hot Rods, ProX etc catalogues something will share the same dimensions, but I'm kinda hoping someone has already done...

hello, does anyone kow if there could be a difference in design between the exhausts made for a 450 to 550 and to 650? i know the cilinder is higher on the 650 then on the 550.therefor ,since it rubs here and there,i'm assuming this exhaust is meant to fit on a 650 :( problem is,i have a...

looking for valves,guides,seals,springs for 98 fc 501.checked kibbelwhite but only for ktm 450.what about lapping in valve-to-seat? What compound should be used?Can any one help?

Is there an aftermarket piston/ring set available for an 05 650? I broke my oil control ring and it got me wondering if there is a better option out there. Imput would be greatly appreciated!

ihave an 01 650 i. i feel the std muffler is a bit restrictive,after pulling it apart and having a look at the internals .i,m thinking of ripping the guts out of my tailpipe/muffler and making it a straight through system,similar to the performance aftermarket jobs. this thing has a 35mm i.d...

Hi, I am italian. I Have to repair my FE 400 E. the number chassis is: YU7FE2000W0000152. The model year is 1998 or 1999? I have to replay piston, connecting rod, bushing gearshift shaft and other parts. For the piston I have found Wossner firm. Can you tell me some aftermarket (even in...

Top O' The Morning, My 03 Fe400 stock rear spring isnt quite strong enough for my 200lbs(without gear). I am under the impression that WP has a spring just strong enough for my weight. My question is should I go with the WP or is there a better spring (both quality and price) in the...

Just wondering if anybody knows of any company that makes a slip-on can for a 2002 FE510E. I know Big Guns used to, but when I called them, I was told they no longer make 'em. Any help would be appreciated.