advice

Well, as some of might remember, I bought a 1999 Husaberg FE400 a couple of weeks ago. I've been having a good time on it, but decided I need to give it a fairly good look over now that I've been getting used to it and moving my fat *** a little faster on it. Anyway, the previous guy I bought...

I've Just Got An FCR37 Off Ebay For Quite A Good Price. I Intend Fitting This To The 400,Will This Be Ok? Not Looking For Masive Power From The Bike As Its For My Dad,Just Something Thats Smooth And Easy To Start. What Jetting Would You Recomend To Start With? Or Would I Be Better Off...

I discovered about a week ago that there is a oil leak where the 2 inner most cases join. I cleaned the area up and put some non-harding gasket sealer on it. Well I checked it again today and still had a leak. I recleaned and then put a thicker coat on. I will recheck tomorrow. Where it leaks...

okay guys that have been through this, I am looking at an 1995 xr100 for the 9 year old. he is just WAY to big for the PW50 :oops: and his little brother is riding it now. my question is this, do you think it is to big? he has not had the pleasure of graduating from the 50 to a 70 or 80 (...

I am looking at buying a new (old stock) FS400e. I would like to know if this bike is better/worse than the FS450,are the 04's onward more reliable etc. I really like the Hus but am naturally reluctant due to it being fairly obscure.

I found a 01 FC 550 but I don`t really know that much about them. The dealer is asking $ 4500 for it witch I think is way to much. I own a 96 FE 501 witch when ever I get off the couch :lol: I trail ride a little. It would have to be a whole lot better before I think of parting from my 501...

i am about to carry out my 1st cam chain replacement. i saw somewhere on this site that someone had trouble on this issue. i would like to tap into the wealth of knowledge on this site, is there anything i need to watch out for. i must get it right the 1st time . i have done cam chains before on...

I will be picking up my 2005 FE550 in the next couple of weeks. I was hoping that I could get some input from the members of this site on set up and break in. I know that there has been alot of stuff posted and I will run some searches, but I thought I could start this thread anyway so people...

Its in the Classified section... I have no idea what to ask for it. Help! WL

I am getting ready to replace the rear tire on my FC550 bike and was wondering what input I would get from the masses. I am currently running the Michelin 110/90-19" Starcross tire, same as the one that came on the bike and have been satisfied with it but have not experimented with any other...

Taffy I know you must be a bit fed up with all this, but could you please tell me some stuff that i need help with please. 1st i have just got a fcr 39 from a yam the later type with hot start, can you give me a part no for the stub that bolts onto the rear for joining carb to air boot 2nd do...

I am a 'berg newbie and I just recieved this bike from my late uncle who was an avid racer and cycle collector. He loved this bke because it wasn't a common jap bike and I love it's power and "rare" charisma. I have a million ?'s, but if anyone has an oldie like this, can you offer up any advice...

Please help! I have been a big bore rider for years but always 2-stroke. I have just purchased a 97 600 E that has only been rode twice and sitting for 2 years without being started. I have already completely serviced the bike and it seems to be running fat. A little smoke (black) even at idle...

Firstly hello. I'm from the UK and around christmass I started riding hare and hound enduro. I bought a TTR250 as it was cheap, easy to ride, good for a beginner etc. no taking the piss, its a good little bike! I feel that its not got nearly enough power, and being left for dead in the open...

like a venus flytrap! where do you hook the spring? do you/can you preload the spring? so you pull the idler gear off first? what angle the kickstart decomp arm? cheers! Taffy

Got a 37 FCR and need to know the jet sizes for a FC470e with a std exhaust. Its set up fine at the moment but its got a open can. When i did put the std can on it didn't want to start on the e-starter but kicked ok if i remember rightly. Tbh i don't know what jets are in it at the moment? Cheers

Hi all, I've come to the source for your advice. Here's my story. I'm mid 40s, had about 22 bikes from Honda QA 50 @ 8yo. to my last bike which I sold, an XR1000 Harley. That was about 12 years ago. I've raced 1000cc Superbikes on the tar and MX on a YZ250 for fun. So I'd say I'm...

:lol:

fellow husey and berg riders (we cater for both here ya know!) well here it is. it's in MS word and i'm sorry if 2% of you can't do anything with it. for the rest of you please have a look at it and if you would like to add anything, alter anything, call it as wrong or misguided let me...