470

Hi guys I'm rebuilding one FX 470 01' and when I colsed the cases I had one axial clearence of 1,5 mm. The crank is in the corrent dimension. What am I missing ??? Thanks ZAGA

Hi, Is it possible to install complete wire harness with stator, flyweel and starter from Husaberg FE 450 04 to a Husaberg FC 470 02?

Hi have just joined site. my berg will not start had SEM & coil cecked by Taffmeister and ok. Have remade new loom as was in poor condision. good spark and plug gets wet (so fuel) But still will fire up.please any ideas many thank Keith

Hello Chaps! I'm looking to offload a FE 470 on an 02 plate. Wifey says 2 bikes are plenty (KTM SM 950 & GSXR 1000) so its the Berg thats getting the push..... Looking for advice on whether to brake it or sell it whole :) Engine was rebuilt by Dave Clarke last Xmas and its done less than 100...

I just picked up a new to me 01 Fc 470 Berg. It has been hardly ridden and taken good care of. still has original front tire and grips sprockets hardly any wear. It runs really strong I am really happy to have a thumper again. This is my first Husaberg ive always admired them, If you guys have...

For sale a 2002 Husaberg FX 470. The bike has a 2001 FC 501 engine. The following parts are all new tires. chain and sprockets, battery, bars and grips, fork and shock seals. engine has kick and electric start. Frame and wheels are dent free . Arizona title. $1999 or best offer Bike in...

There is a cheap one on ebay now (brand new Wossner) ... see item #160449146554. Not mine, just happened to see it and figured I'd post my findings here.

just got a 02 470 for street, trails, and mx and the power seem real down from the 05 husa FS 450 i had or the 560 smr i have. anything I can do to get some cheap power out of it( i have a fcr 39 carb). the bike is completely stock. how about handling? how about getting the estart to...

I just got a 470 husa and I thought it would be something close to the 05 FS 450 i had. I am not impressed at all with the power, I think it feels like a late model 250. can i get a fcr 39(i have an extra) on there for more power. what else can I do to make this bike move. I have a 560smr for...

want to put on some 03 ktm mx tech revalved suspension, I know the front will bolt on. any idea if the rear shock will bolt on as well. thanks, Edwin anything to make this bike handle better,like changing out the triples to 14 mm. thanks, Edwin

Hiya i am the unfortunate owner of the big berg project you may have seen last week, yes thats the one, engine, box, 1000 bits etc. the bike and its engine are currently at dcr however i have been told to prepare for the worst as dave rekons itl cost at least £700 just to get the bike up and...

getting a 02 470 husaberg, not even sure which one, I know it is 6 spd, estart, and has no lights on it. I has a 05 fs 450 and 650 in the past so I know husaberg. wondering if I can get this bike to handle better with some triples. i guess it will come with 20 mm triples. I want to maybe put...

Posting for a friend, I have not seen this personally. My buddy just put a '05 550 starter in a '02 470 and it just spins and don't engage. Is there any reason this starter wouldn't work? Maybe some kind of mod needs to be done to it? Read the DOC and not sure if any of that applies. I'm...

I am looking to build some SM wheels for my FX 470. Which hubs will fit it? I can handle the rest from there... I see lots of info on here about this. I can also order custom bearings to accomodate different axle sizes, but just need a starting place, as far as hubs...KTM? Husky? What will fit...

So I just got my 2001 FX 470. The electric start does not work of course. It clicks, but that is it. So I have to kick this freaking thing. And that is an adventure..... I will get the hang of cranking it, as I have had many bikes.... My real question is, to address the ridiculous cold natured...

Does anyone know of a wiring diagram for an 02 FC470? I (and Dave Clark) have rebuilt the bike but the wiring is a bit of a birds nest! I would like to lighten the bike so lose the starter motor and the battery and strip out as much of the wiring as possible. I am aware for a daytime MOT the...

Hi, the saga of my 01 470 rebuild continues. Iv'e made a new liner, rebuilt the dogs on the g/box, rewelded the swingarm boss crankcase crack now only to find a crack in the crank radiating from the large lightening hole to to crank edge on the drive side flywheel. Im seriously considering...

looking into playing with the engine,now as i am aware 470cc is 62 stroke 100mmbore,can you put a longer stroke crank like a 70mm in the std 92mm bore of the 400 to give 470cc? anyone done it

a couple questions , long time 2 stroke guy here , i know i know ok now that thats uot of the way I have a husaberg live in michigan and have an issue,I'm getting coolant coming out the exaust, not alot but you could smell it and see a small puff of white, shut the bike off right after...

Hi All, Is cylinder replating a viable option vs replacement? I split the case on my motor and the nikasil is flaking and the piston skirt is defective as a reslult. I also found that there is significant play on both ends of the conecting rod. As it looks right now, I am going to be...