470

I don't have a spark in my FE470, where do I need to start checking to fix the problem? Bike was working perfect the last time I rode it, battery is charged, starter works good

I bought a Husaberg 470FE 2001 that the previous owner took apart, I am working in the stator and I am having problems with the wiring connection. I have 2 yellow wires and a light blue wire coming from the stator and I am not sure where do they go connected. Any of you have can guide me...

Hello Any one know if a 470 cylinder liner will work on a 450? the liners seem identical except the bottom cut out. will the 470 liner have a interference with the 450 balancer or the crank? https://pasteboard.co/JnoP8Z4.jpg

Looking for a exhaust cap end off a FC 470 that is not restricted. Cheers

Im missing the Regulator/rectifier.. Read a post here that a Trail tech regulator/rectifier with 150watt would fit, then i read something about "floating ground" on trail tech that made me confused! anyway, is it possible to use this one: https://www.trailtech.net/7004-rr150 ...

Hello. FE470e 2002 A pin is broken, the one on the gear for driving the camchain. Should I just make a new one frome a pice of steel plate, is this okey?? or where can i get a new one? Will a DIY pin do the job.? 2nd: Problem two is a crack on the gear, see pics.. Should i replace this...

Hey guys! I'd like to ask where can I find this coolant air bleeding screw? I dont find a proper manual for fe470 2004, heard that it must be close to the spart plug but i dont see any screw there. Could somebody please mark it on the pictures I sent below from both engine sides? Thank...

i have an old 02 470 with taffy's FCR jetting pretty much.....and ive got a notion to take it out into the desert around Moab. what do you think my range would be plodding along in 4th gear or so on fire road type terrain? also any ideas where i could source a big tank or an auxiliary tank?

Hi! Restoring a Husaberg 470 for a friend and having some electrical problems. It doesn't start... So just removed all cables etc to compare with the diagram. I think the previous owner made some own connections or connected something wrong. So anyway, from the Ignition Coil there is some...

the bike I always laugh about as being the last of the starters - the 470. I have a weird one here. it actually starts so well, there is no kickstart lever fitted and I don't know what make sit so special? :D:D anyway, I shall still always say how bad they are at starting but there will...

my FX470 is partially apart (about 200 hrs) and it seems the cam chain doesn't have a master link. am i correct? i'm planning to freshen everything up and install an updated two bearing balancer and updated rockers. also i am going to install the dual valve spring set-up. what else should i...

Like the title says. Looking for a set of 470 cases or possibly a run out / damaged engine as long as the cases are good with no cracks.

Im looking at a frame and parts I have sitting in my shop. I have a running plated 650 but I'm thinking of something smaller using the spare frame and parts. I have everything to build another 650. I'm considering purchasing cases and parts to build the extra 650 into something smaller. I was...

A friend to an engine, I do not know what type, the components and FE600E are what is universal? In China accessories too hard.

Hey guys, some interesting things I found fiddling with some 450 and 470 cases. I have two sets 450 casings, one case is cracked. Case 1 has part number 810 3000 3000 Case 2 has part number 810 3000 3100 One case I think is from 2004 model(3000),and the other 2005 or later. Part...

Hi, I 'm just curious. Has anyone tried the 470 piston in a 550 engine, especially in an engine with a 2001-2003 cylinder head with the larger inlet valves? I've a new leftover Wössner piston, #8552DB and noticed that it's not possible to shave of the increase in the middle of the piston safely...

Good people I need guidance. The rockers on my 2002 470 are worn and for a long time would not do a feeler gauge set. The hand turn has worked fine. I think I have serious valve set recession as the valves are very tight after a old slow guy's 35-40 mile off road ride. I am due a full head...

can anyone tell me if this is a simple crank change? i have to install a new balancer in my 470 anyway so i was thinking of increasing the displacement if it is reasonably easy

I have a chassis for a 02 470, and can get a frame and engine/electrics from a 06 650. will everything bolt up?? thanks, Edwin

Has anyone ever put a 470 head and piston on their 650? I have a lot of spares now and was thinking when its time for the 650 to come down to swap same heads and up the compression ratio