390

As the title says, i'm thinking of fitting an oil cooler to my 390. has it been done before? not really sure on what to use, but i was thinking something along the lines of somehow using a old xr cooler. the little one that sits up under the headlight. chhers

Hey guys, does anyone have a part number for a swingarm bearing kit for a 2010 fe390? ive searched for individual part numbers on ebay etc, all i could find was the all balls bearing kit, are they any good? seem reasonably priced. thanks.

i just need to find someone who has fitted an fmf system with bomb header to this model as i want to know the before and after..as along with suspension and mapping switch i want to buy one but not if the header doesn't maake a noticeable difference which it seems the akro doesn't on this model

Do I need a press to change the swing arm bearing? http://www.bikebandit.com/2010-husaberg ... #sch656444

Last winter I threw some sta-bil in the tank, kept the battery charged and called it good. The bike ran fine in the spring, but due to illness (lyme disease) I haven't ridden at all this year. I tried to drain the gas via a siphon with mixed results, the tank is so convoluted it's hard to get...

Hey, I'm looking for a great deal on a new '09 or '10 FE 390 for my son. I'd consider a like new, used model as well. Needs to be within a couple of States from California, or in Cali. Any help??

I am having a problem and cant figure out what is causing it. It's a FE 390 2010 model, stock clutch, rotella oil, the hydraulic parts have been bled, back bled, forced bled, first with magura oil, then trans fluid. The bike has 900ish miles on it, oil change every ride, filters every other. The...

Where is my Lambda/O2 sensor? The manual shows the sensor near the spark plug in the second section of the exhaust pipe. Thanks, Todd

Less than 3 hours on my new 2011 FE 390, First real ride died while riding at 20 mph and would not start again. Dealer put new battery in. Second ride, started fine, rode for 30 minutes fell over around a corner it would not re- start, battery seemed fine. Eventually got it bump started...

My first Husaberg, 2011 FE 390, came with 52 tooth rear sprocket. Not sure if its just me but seemed second gear lacked a little zip right off the bottom in the slow going stuff. Should I add 1 tooth to the rear sprocket, make it a 53 tooth or would I even notice this ? Also my front...

Bike: 2010 Fe 390 Modifications: Slip-on muffler, 570 air box, mapping switch (on #1/traction), and Crank case hose is disconnected from air box. My attempts to resolve: new plug, fresh gas, new air filter, and new battery Problem: Has always needs just a touch of throttle to start. Thanks...

Hello, I just bought a 2011 FE 390 and did not have time to go over it with the dealer, had to get to work. I have no idea how to charge the battery and can't seem to find it in the manual. Is there battery post that are located somewhere other than on the battery itself that are easier to get...

My E-starter failed. Anyone know of an upgraded starter for Fe 390? Thanks, Todd

When I press the start button, all I get is a click sound (no fuel pump sound). I can push start the bike and it will run fine. I have put a new fully charged battery in and have checked all connections behind the light so far. So now I am looking for advice. Where should I look next?

Hy guys... Greetings from Portugal. Just bought a FE 390, after several years of good services on my other bike: CRF 250X. I´m completely in love with the husa, the fuel injection, hidraulic clutch, frame design, mass weight...really is becomming my second skin. But...(there´s always a but) I...

Just got an FE 390 which used to be one of the Midwest Husaberg bikes for Ollie Moyce. Wow, it's great! :D :D :D it has a little more go than standard but feels so very different from my 501, unrecognisable from the old school. The sharpness of the whole bike is a world away, but somehow not...

Just got a new 390, well got 20hours on it now. Fitted my Scott steering dampner from my gasser and I'm happier now Time to get the suspension dialed in properly However I have pondering what happens when i eventually drown the bike. Any special things to do with the FI when it comes to water...

Hi all, best map to use on the 2011 fe390, and once i do a map reflash (at dealer) does the map switch still work or is the switch made for the default map / programing? Thanks, Dave

I'm almost reaching the end of my rope with this stalling issue. Once the bike is hot it will stall at low rpm's, must of stalled 20 times on me yesterday. Things I have tried/checked: currently at comp map ending in 1002 new plug new plug cap wrapped mid pipe dealer changed fuel...

Guys, need your advice here. I sold my 2008 FE 450 to someone who's a bit larger at 185 lbs and I am looking at a 2010 fe 390 with 106 hours on it. Would I be able to swap the suspension setups between the 2 bikes? My 2008 fe 450 had a Full factory connection setup with 20mm spacers fork/shock...