390

hello everybody i got my fe 390 1 year ago and all was well. about 3 months ago there were times when the bike wouldnt start when cold. it does this once in a while i cant figure out what it is. changed the battery and spark plug but i reckon its either electrical or fuel. i would appreciare...

hey all! new to the forum and also a new berg owner. was on a ride today and somthing popped and the bike started to knock. Instantly i shut it off. my first thought was the cam chain tensioner so I am gonna order a new one none the less.. but if I try to start or even crank over the bike a...

Hello all, I think about buy FE 390 2011 model, there is 79 hours on the clock, two owner bike and drive only for fun (no race history). Bike looks ok, and engine run very well. I have few questions, this bike have 79 hours on the clock oil is chance every 5-10 hours and the valves been...

Hi guys I have tried flicking through the search area to find this answer but to no avail, I know the horn wires are usually short and down hidden in the frame but weather the previous owner has chopped the I cant find it. What I wanted to do was to find where the two wires start from behind...

Hey all, searched around and couldn’t find a very definitive answer. I broke the headlight housing on my 390 the other day. Looking to replace it with an aftermarket brighter unit. Please sound off your suggestions on best fitment and price. I don’t need the sun shining from the front of my bike...

Hi, I'm from Spain, and this is the only Husaberg forum I've found. First, excuse me for my English. I think that in this section of the forum, I have the right solution for my fault, since it seems that the bike's failure is electric. Excuse me if the subject has been discussed in another post...

Hi guys, sold a Honda crf250 and got a 2011 fe390 today. One owner, awesome condition. Pumped to get out on a trail. Gonna need some kind of security like key or immobiliser so keen to see what you guys have done to solve that Cheers

I'm ready to buy a street legal Husaberg. If you have one your wanting to sell please reach out. I will pay up to $5000 for a 2010+ low mile mile well cared for 390 - 450 - or 570 and I am willing to arrange for shipping as well. I am in Bend Oregon and I look forward to hearing from you. 390 -...

I'm ready to buy a street legal Husaberg. If you have one your wanting to sell please reach out. I will pay up to $5000 for a 2010+ low mile mile well cared for 390 - 450 - or 570 and I am willing to arrange for shipping as well. I am in Bend Oregon and I look forward to hearing from you.

I would like to know if I have to turn off the motorcycle to change power control or can be switches with Engine on?

My Husaberg 390FE 2011 does not start. I only have 5v in the switch to the fuel pump when I press the start button. But the starter engine is spinning as it should. Anyone who has been involved in something like ?? The motorcycle has been around 70 hours. Thank you for all the answers. / Daniel

Pretty much title says it all hope someone can help me out.

Cd manual. Parts / workshop manual. Wanted. .. Original. Copied ok. Download to usb stick ok . Urgently needed. ££££££...???? Located in u k . Just got fe 390. Looking for super moto wheels also.. Also contacts in London area.

Hi! This winter I mesured valves and opened and cleaned parts from the ignition. But after that I have problems that I can't solve. When I start the engine it works fine but when it's come up in temperature it goes down in rpm and feels like it has lost power when I give gas. But in higer rpm...

I have an 11 Fe390 and can't get the back frame/ tak bolt loose, the threaded rod inside the tank keeps spinning. What can I try???? Help

09-12 FE/FX 390/450/570 (2) new Twin-Air air filters with new cages. Will not separate. $75 (2) used OE covers (clutch & ignition) includes hardware no gaskets. $75 (1) used tall seat includes new spare foam and unobtainable cover. $100 (1) used EE casesaver #PT-099. $20 (1) used Akrapovic Ti...

HI, any one could help me to instal the alu factory skid plate on my 2010 390? I've find two little holes on the bottom frame, just on line with the 2 holes on the plate, but closed by a pair of plastic cover. Trying to mount the alu skid plate, after have been removed the original plastic...

If anyone could please give me piston ring end gap and cylinder head torque it would be greatly appreciated. I am just freshening the top end of my bike and didn't realize that I need to work for NASA to get info and parts for these bikes.. lol

Newbie question. Any recommendations for someone who,can fit an unrated spring to the rear of my 2011 390fe and is it worth updating the front springs at the same time? I've noticed the seals need replacing so they have to come apart anyway. I am 6ft 3 and with kit on will hit 110kg...

Hey lads, been chasing one of these puppy's for ages! Stoked! Mint in the right areas but cosmetics need a tidy up.. Went to local dealer yesterday (trying to keep the $$$ local) and was told parts will be 2-3 weeks and quite expensive. Used to this, also got a TM and Australian...