350

Have now sold my 390 and a 350 is on order! Thought I would start a thread so anyone getting one can give some feedback on the bike, tweaks they make, suspension settings, etc. Will update when mine arrives!

so, in this crazy world we live in where one of the best engine designs gets abandoned and the bike we all love gets adopted and has to change its name, would it be wise to buy a 2013 350 FE? Obviously a great bike with much more to offer than the KTM but the orange bike will still be a...

Just bought a new fe 350 and was wondering if the main harness can be used for the dual purpose. I checked the ktm part number for the exc-f street legal model and it was different

So, I have a 390 which I love, which has fantastic handling and outstanding power/torque. But one day it will get old and I will need to change (sob, sob). My thought was that I would most likely move to a Husaberg 350 so had a go on a new KTM 350 at an event last weekend. I was so disappointed...

The new 350 turned up, nice looking bike ,now to get it dirty

Hey guys, new to the forum and appreciate all the knowledge here. I am looking at a very clean 91 FE 350 dual sport bike and im becoming very concerned with parts availability. I can only find common wear items online. Pads, tires, levers, cables etc. Cannot find seal kits or any engine parts...

Hello Husaberg owners. i just picked up a 1992 FE350. It is a very cool bike. Can anyone tell me the good and bad about the model . I also could use some parts: Airfilter, Chain rubber, new decals ??? Can anyone tell who was a dealer in the 90's that may still have parts for these. Thanks Phil

Hi, I have a 1995 husaberg 350 fe and i am looking for plastic for it does anyone know where i can find any and what other bikes have the same plastic as the 350 fe?My email is [email protected] Thanks gary

Hello. I have a 1992 husaberg fe 350 in which the stator is dead. Now I have quite similar stator from a 125cc aprilia. I measured it and it gives 1,7 kOhm from red to black and 60 Ohm green to black instead of the 23 Ohm it should be. I'm not getting spark with this aprilia's stator and I am...

I'm buying this bike.The seller says me that is 1992 model...but i know that in 1992 the colour frame was grey.... Whatever the frame looks like pre 1994 model.

I have a FE 350 that runs well but when I rev it and let off the throttle it backfires which doesn't really bother me however it also blows a small flame out of the tale pipe that can be seen in dim light. it has the Big Gun exhaust on it and i wouldn't be shocked if there is some small leaks...

Have a customer that needs the manifold boot that goes from carb to the frame. husaberg dealer sais part is discontinued. Part number is H15000201. `Thanks

i was wondering if anyone had any in formation on replacing the clutch on early husabergs mine is starting to creep when the clutch is in and it is in gear and it is difficult to get into neutral while moving and impossible when stopped

i was wondering if any one knows if the early husaberg's use the same sem stator that every one complains about or if they used something else before ktm bought them and if they do use the same stator where would i go about finding a backup thanks

Hey this is my first post, I'v done a bunch of reading on other peoples problems, and now I'm looking for a little Berg help. I have a collection of 3 501 motors (91, 94, 2001) and a 350 (91), as well as a parts 350 motor. I got the 2001 with a broken cam follower bearing and i'd like to get...

I built this exhaust for a friend/shop owner who wanted something special for his Berg on the showroom. It is an early 350 Berg. The pipe worked well and pulled hard across the powerband. It includes a megaphone starting at the center of the cylinder.

Could someone please advise me the Bore and Stroke of a standard FE 350 motor - Thank you.

motor number 1020459, frame yu7fe35000n0000250. I sold it to John Appleby the importer in Victoria Australia in bits. Does anyone know what happened to that bike?

My new Husaberg 350 (-93) makes some strange noise(2 clicks) when handling the clutch. Previous owner told me that the clutch and the wire was new. Someone who knows whats wrong? Best regards H.E

Hello, Over the past several months, I've been putting my '95 FE 350 back into proper order and have learned a LOT from these boards. My thanks to everyone who unselfishly shares their experience and knowledge here. Is there anyone else out there running a 350? It doesn't seem to have...