2009

Pictures say it all. This bike is not "like new" it basically is NEW!!! Less than 40 hours on the bike and selling due to an injury :furious:. Too many extras to list including a complete extra set of wheels and tires. Full FMF titanium exhaust. Call 623-202-8382. Located in the Phoenix...

I hear that the fmf pipe from the 505xcf fits the 570 fe husaberg 2009, just wondering if anyone knows if this is true or not?

Other than OEM any options? Only used as a trail bike so breaks my heart looking at the price of the OEM fibers. If anybody has codes of a Ebc or other model that should work, I was guessing Ktm ones should fit?

G'day all. Just changed out both water pump seals, oil/coolant, on my 2009 Fe390. The coolant seal was straight forward but it wasn't quite clear as to wether the oil seal could be replaced without removing the housing. It can be done. Carefully. The oil seal is backed by a bearing so there is...

I have a fe570 running a Timbersled Mountainhorse kit. Long story short I had an issue last week. Starter would not disengage , relay got hot and fried, smoke poured out etc. Managed to ride out by jumping across to battery to start bike. Replaced the relay and now bike won't start. I've swapped...

I recently had to sell my 400 exc due to a family emergency and now that I have some cash saved up I am back in the market. I recently can across a 2009 fe450 factory plated that I'm looking at. Price $4000 182 hours 3200 miles. I'm hoping to get some opinions if this is a good buy or not? I did...

Is it much hassle to wire up Indos to a 09 fe450? I have the genuine switch still in its packaging and some indos that I am looking to mount just to the rear of the bike. Before I start ripping the rear end of the bike apart and I may as well ask to see how easy or awkward this could be. Thanks

https://youtu.be/xISFkr0s4HU Maybe someone have ideas where is problem? I am thinking is something with fuel. It working only on high RPM and then shut off.

A couple years ago I bought a 2009 FE 570 from a friend. He said he never had any problems to speak of with it and for the first year I had it neither did I. But after some bad gas in Baja the bike started to have issues. I was on a ride in Foresthill when it got real bad. there was no response...

I am looking for a sub frame tank for my husaberg sm 570 if any one has one I would like to buy it. thanks

I found the two wires under tank ( by frame ) . I hooked to them and made them longer . I tried to hook to a horn , but it does not work ? I have the blue button , next to my stock red kill button . How do I get horn to work ?

Ok, sorry for the long post. I asked on another thread about a light but I think I found a snag. This is the plastic kit I have that came with a headlight mask, but it doesn't seem to fit the KTM headlight I have. I've attached pics, I need to know the exact headlight and does the mask cover a...

hello everyone, this is one of my first posts here. i have a 2009 fe450 that needs a little bit of throttle to start when the engine is warm (still might take two or three goes). However when it is cold, the berg fires up right away at the touch of a button... i have read somewhere that this...

Hi all, I've been thinking about slowing down a potential thief with a hidden 'kill' switch. Either a rocker switch or one of them tether kill switches. Question is, do I wire it up to the oem kill switch or to the oem start button? Thoughts?

First problem, a little bit sweaty. This fixed it, I could wear this for cologne. Its done some sand work, sand everywhere! Any bets on how long the slave lasts? Threw a 14t front sprocket on while there, the old sprocket has 21 hrs on it! They work like a fuse. 14t should...

I've wanted a Husaberg for years...bought a 501 installed new lt tembersled..found a 570 added mapping switch and moved timbersled kit to 570..love the power of 570...played in two ft of new snow Saturday...The short track 450s didn't have a chance at keeping up with me. Now I think I have a...

This would be a great addition to this site. Perhaps whoever purchases it can scan it and post with the manuals. Husaberg 2009 Technical Training Manual 2 Day Factory Training School RARE Info | eBay

After reading some recent threads I thought I would get a leg up on the summer heat and install a radiator fan on my 450. I picked up the KTM/Husberg kit and it looks straight forward. I thought I would post in hear to find out if there are any tips to make this job easier since the...

I hope you can help me with a lighting problem. my husaberg FE 450 2009 ha a switch for HI and LO lights, but only one is working. When i take a look at the electrical scheme, there's something strange about the internal wire inside the switch: The power comes from the yellow wire. When the...

I might want to install blinkers on my FE450. I have to buy the blinker switch, and flasher relay (and lights oofcourse). The wiring is there... But i could not find the blinker wire for the rear blinkers. It's connector X400 on the wiring scheme: Is it under the seat ?