2008

trying to check and set valve clearances on this model. I am lacking the proper service information. I was wondering if anyone has this info on pdf ?? thanks in advance Chris

Will it fit in my 2001 frame? Ketil :spin:

Hey there Bergers... NOT mine ( I have the 550) but this is an 08 from Boz down in Portland What a machine !!! 2008 Husaberg 650fe with lic plate Scott

I am a California resident, and I am going to check out an fe650 in Oregon. However, before driving up, I want to run a Vin check. Unfortunately, the vin I got from the owner (confirmed a second time) is not in any database of any vin checker that I could find. I'm concerned about registering...

Why the heck am I having such a hard time finding this complete Husaberg manual??? I would like to buy it in paper back, but I will download and print if I have to. Thanks,

Hey folks want to get spare wheels for my '08 550 Questions: From what I have searched and read here, KTM sets from '04 on will fit Correct? or same on the parts if I wanted to go build my own KTM - hubs, spokes, rim sets etc? Thanx !! HR

Hi, I'm trying to find a new or used aftermarket full exhaust system for a FE650. Anyone point me in the right direction to get one shipped to here in Australia. Cheers

Here is what I ended up with for my jetting, Its really good for me so I wanted to share. I ride year round from 4000 in winter to 11000 in summer. My bike was bought used from Portland with a Taffy jet kit installed so I don't know what needle it is becasue the numbers are filed off. Before my...

I have always charged the battery with a trickle charger: I attach the positive clip to the positive battery peg, and the negative clip to the negative wire bolt where it attaches on the starter motor. I recently put in a light weight lithium battery works well, but first ride I have developed...

any ideas? just today engine starts when cold and idles well, after a short ride it dies. When cold it started well again but after about the same time cut out. Did this a few times. Does not want to start when last tried. Fuel getting to carbi ok. Plug looks normal, No strange sounds...

Hi, Can anyone confirm that Husaberg had a FE650 2008 bike that came with a Factory painted black motor?? Cheers BD.

https://picasaweb.google.com/1179750124 ... 7473414914 I thought a 15t should fit, but it's hitting the swingarm protector (not sure what it's called). Should I cut the rubber away? In the pic, it looks like the previous owner cut part of it off, but if make enough room for the 15t, I think...

HI guys, not long purchased a Husaberg and really struggling to find an aftermarket exhaust for the bike. Looking for something that will give a bit more power and noise. Any suggestions grately received. Im in the UK so sourcing one from here would really help too!

hello there, its been more than a while since i last posted here! here 's the deal, i rebuilted the whole engine few months ago due to a broken camshaft bearing. con-rod, cam shaft, all bearings (except of the gearbox ones) , camchain, piston rings, rollers, etc . all these were replaced. the...

hey all... im in dire need of some 08 fe550e parts and cannot convince the mrs to let me pay full price!( which is ridiculously expensive where i shop) so any help would be appreciated on sites to buy cheaper parts from, 2nd hand parts etc... i need; radiator, radiator fan, guards, braces, rims...

Hi guys, just doing my first valve check and ran into a possible issue... Basically, i couldn't get the feeler gauge under the pad? and valve, but i believe part of my problem was the feeler gauges i'm using are just to 'wide'. Looking @ the pic below, that feeler looks to be much more...

2008 FE450, 45 hours on the clock. Went riding this past Sunday. bike started and acted well up to about an hour and a half into the ride. after a very short but steep decline, it just choked and died. couldn’t get it to restart. Tried kicking, tried the button, with the chock on, with the...

Hi everyone, A local place around here is blowing out some old husaberg parts and they have an amazing deal on the beringer 6pot/rotor/master cyl. Around 500 dollars CAD for everything! I have a set of KTM supermoto wheels and just recently purchased this EBC rotor and adapter, but now that...

yup....... Im an old engineer and I ask LOTS of questions. found a pretty good shape 2008 FE550, in fact owner still has the MSO - no title ever issued. 1. Does anyone know what is on the 08 MSO in terms of off road use only or better yet, if the VIN is in any way restrictive for off road use...

in todays suck you know what economy? low miles, cherry, no mods. (350ish miles) I know these bikes rock, and are the best of the old design reliability and fun. Just wanted to check with the experts. HR