2008

hello , im going to go have a look next week at a 2008 fe550, the owner says the bike burns oil on start up, but goes away when warm mentioned vales seals, do you thing it could be just seals or guides as well? or even whole engine rebuild? its all the info I have at the moment! thanks...

Hey guys, having a little trouble getting much feedback around my friend group with the 'Berg and figured I'd try the forum. Just finished putting the bike back together after I broke the first gear pin off the shift drum. I've followed the repair manual closely to repair but I am still...

http://husaberg.org/husaberg/25489-nos-2008-husaberg-fe-450-e-complete-motor.html

https://www.ebay.com/itm/NOS-2008-HUSABERG-FE-450-E-COMPLETE-MOTOR-4-STROKE-ENGINE-KTM-HUSQVARNA-MAGURA/352544946201?hash=item521550f819

Hi all. While in 6 gear cruising notice metallic rattle from motor. Pull clutch lever to point of clutch disengagement and noise stops......let lever out to point of engagement or further and noise returns. Notice it while cruising in 5th or 6th gear....probably because higher speed. Has...

Looking for ideas for a spark arrestor insert for the factory Akro exhaust for my 2008 FE450. My akro has an insert but no arrestor screen/tube. I've looked through the forum but all the old links are dead or the companies are gone. The parts fiche only points my dealer to the non-Akro exhaust...

Genuine Supermoto. 2800 in the clock Mint and uncrashed, stunning original condition. KTM Duke wheels (black) currently fitted Original Wheels n tyres also included Very rare to find a genuine black late model. Doma system Lack of use only reason to sell Hants/Berks border. £3750 no...

Hello , I am new to forum and think its best place to start solving my issue with recently 3 week ago bought Husaberg. The problem is with the idle. When I bought it started well with the choke on and was running ok with choke on. Then when I went for a ride I could barely ride 1km when ...

Collectible quality with complete provenance. $5800 firm. Close to "new old stock" condition with minimal wear and use. Bought locally, new off showroom floor, when Husaberg announced they were not going to make them anymore. I have been its only rider (I'm 57 now). I used it to ride with my...

Hi Guys......thanks for letting me join! I have a one owner from new HUSABERG 450 FE on a 58 plate live MOT.....the bike is totally immaculate, starts hot or cold with two revolutions, new extremely light weight lithium battery, new soft touch pro grips, spare plastics, new gear lever, lights...

Hi I'd like to change the exhaust now.:mad::mad::mad: I do not have anything on FMF. Do you know any sites you can buy?:cry::cry: I do not care if it's akrapovic. Do you know? It's 2008 year.

Hi, I'm new to the forums and have been doing a lot of reading on the wiki and other user threads. I'm currently in the process of deciding if the 08 FE550 will be a good buy or not. It has around 11000km or 295HR on the engine. The seller says he doesn't know if it has had any rebuilds done...

Hi, Took the 2 x covers off the lower joint/bearing. Bearing itself looks and feels good (no radial, lateral, or longitudinal play). But I damaged the two covers in the removal. Don't need the whole bearing replaced - just those two cover rings. Looked high and low, and can't find those...

Hi The rear shock on my Berg is way too firm, I'm 80kg. Going to play with the rebound and comp but would like to know how many clicks should it be in stock form and work from there. Riding is more dual sport type terrain so not too hectic.

Hello all. Very happy owner of a 2008 FE650 here. Firstly I'm sure most of these questions have been asked before but if you dont mind I'd like to post them here. The inevitable oil breather. Is it normal for some oil to be in the airbox ? I have the stock Y piece later design breather but...

we are parting out a 2008 fe 550. had 1200 miles according to the speedometer. motor, exhaust and carb are sold. please call for any specific part/price information.ph 707-446-4282 thanx, dan.

Hi, Working on a little modification - and am trying to ascertain the inner diameter of the steering tube. My ID caliper arms can't clear the flared steering bearing races to effectively measure against the INNER walls of the head tube. Since the OD is 56mm, and I'm guessing a wall...

Hey all, My 2008 FE 550's swingarm has a "bearing inspection window" feature ... :eek: Any hope of salvaging this? Could an aluminum welder "fill in" some of this? JB weld? LOL ... Not keen on dropping $800 Robert Bordens on a new swingarm ... thx, cm

I've got HUSABERG FE450 2008 and I don't know which coolant is best to use. I've checked owners manual but didn't find answer please help me ;] I found on ebay: MOTOREX COOLANT M5.0 or M3.0 and I don't know which buy thanks for help

Hello, As part of the winter refurb, I'm wondering about how to freshen up the appearance of my two side covers. The stator's not bad, but the water pump and clutch covers are peeling the paint badly. What I'd really like is some form of reinforcement - for my DRZ and 690, Thumpertalk and...