2006

Ordered a FS 650E, and the C model was delivered to the dealer, and they said they would get all of the OEM parts to make it road legal, and its quite a pain in the *** to do, due to the title issues. The good news was I got it all done, lights, tires, directionals, fan and so on. The bad news...

I've been trying to decide which supermotard to get and have finally decided another Berg would be best over an Aprilia SXV550. This way I always have spares :wink: I would like to get an FS though I've seen some good FE's around. The two FS's that I'm thinking about are a 2005 and a 2006...

2005 Husaberg FS 450 C SuperMoto Brand New 0 miles $4500. 541-617-9155 This is a brand new 2005 Husaberg FS 450C. This is a competition only Husaberg Supermoto. It is electric start, but has no lights or kick stand. This was intended to be a racing only bike and is not in anyway street...

so I'm pretty sure my steering steam bearings are freezing up, time to replace, bike is 2 years old and never been greased except what little was done at factory. question: do I need husaberg bearings ? or would KTM have the parts too? if I do need husaberg parts, where do you suggest...

Just a post from a long time pencil pushing Husaberg rider. My 06 Fe550e is in great shape and runs fantastic, still loving it. I am 250 lbs and Have really been fighting the suspension, new springs in front and adjusting front and shock clickers all many times but not happy, finally will...

Hi all ,i am getting used husaberg soon, it is fe 450 06 ,and motor has 100 hours , how many hours can i put on it ,before i check valves and piston replace ?

I have a stock 2006-650 motard. What kind of upgrades would you recommend? exhaust, airfilter, tuning, carbs etc.... or othe stuff. I was thinking about buying an akrapovic-setup.. or maybe those double-can systems from that swedish company. do you guys know if thet will fit a roadlegal...

Hello everyone - this is my first post. Have been lurking around for about a year. This has been a terrific resource for me to learn about my bike. Here's what I have been thinking: I own a 2006 Fe550e. Has been an incredible bike for me. Still in great shape and lots of miles left -...

Just going through the 2006 owners manual looking for torque values reviewing main. and it states all FS models have dampened rear hub. I was told by the dealer and a few others that 2006 doesn't have it. Does anyone know for sure? I wish the bike was here so I could have a look myself. I am...

Just wanting to know if a radiator from a 2001 400 will fit a 2006 550 I need to repair or replace my 550 radiator due to damage and have found a good second hand one which is cheaper than repairing mine thanks for any info

I had no trouble with my used fe450 but I am drooling over a new fe 650 Boss picked up in Salt Lake and I also in my research found a 2006 fs 650 brand new for less than 1/2 price. Just Curious? Thanks Mike

OK, So say I take the whole motor down to see were the problem of a few metal shavings on the magnet are. (clutch cover off topic) I realized that as much as I love getting dirty I am probably going to stick to what a middle aged man,father with 2 fake hips should. This would be...

Hi from a newbie to this site! A brief history on myself: About 1 year ago I purchased a new 2007 Kawasaki KLX-250S and I have ridden it about 6,000 miles. I do the simple wrenching on it and have done simple mods like decorking it, new front fork springs, new exhaust, and similar stuff...

When reading the manual for bleeding my clutch I have a couple of questions? . Do you need a bleeder syringe? My nipple has a side opening at the bottom. If I were to just turn th nipple 1/2 turn until fluid came out when clutch is compressed then use small rubber medical hose over a...

Hello All, I have been doing so much street with the FE450 I am seriously considering a fe 650 for street and set the 2006 fe 450 back to dirt. I see a big difference between pricing on Husabergs pre 2006. Is there a big difference between model years? Will my springs on my 2006...

Hey whats the best route for getting a cush drive for my 650C??? Have one built or order a new wheel from the dealer??

95 miles on her up through the gorgeous Columbia River Gorge today. Rick at BOSS helped set me up with a combination 2008-2007 graphics kit. Everything from his shop except the Cannon progressive shock. He is a great resource and will give advice and technical support that you will never...

I have the opportunity to pick up a brand new 2006 FE550E for a really good price, I currently own a 2002 FE501E which with the exception of two SEM failures has been a good bike, so I am used to the Husaberg maintenance drill. Here lies the dilemma: I am one of those guys who intends on...

well i've gone and put a deposit down on a 1 owner 2006 450. had quite a good go on it on some fast bits plus more importantly some trials type going. was actually a bit of an eye opener, there was more of a difference between the 450 and the 400 than i imagined and whilst my 400 wasn't...

Last weekend took my Berg from 1000 feet to 7500, I only changed the MJ from 188 stock -> 178, seemed to do the trick .... it ran awesome, no backfire, good power range ... Question I have is , how do I get at the needle clip on the FCR carb? After I remove the top of the FCR carburetor...