2002

Hello. FE470e 2002 A pin is broken, the one on the gear for driving the camchain. Should I just make a new one frome a pice of steel plate, is this okey?? or where can i get a new one? Will a DIY pin do the job.? 2nd: Problem two is a crack on the gear, see pics.. Should i replace this...

Hi All, cab any one point me in the direction of a manual for the FE 400 2002. I need one to show a full engine break down. cheers

2002 fs650e needs CDI unit I have purchased two that were faulty. if anybody knows where to pick one up at that would be awesome

I weigh 255 and need heavier springs on my FE650e. I called Slavens Racing and they only offer springs for 2004 up. Does anyone have any experience trying to use 2004 up springs on a 2002? The sales rep I spoke to gave me canned ID/OD answers but no specifics on if they can be made to work...

Hi Everyone, I have a question about camshafts, i found a post where somebody said that 08 camshaft for fs 650 2002 is better power on high rpms, and with 53 (original) camshaft the bike have a big torque at low rpm but wont enough in high rpm. What is the better for longer runing hours...

New paint on frame and many other components. New hand grips, battery, starter solenoid, clutch master cylinder rebuild kit and carby rebuild kit. All electrical components checked by Small Coil Rewinds. Stator rotor rebuilt. New steering head and swing arm bearings. WILL NOT START. Has...

Hi, please help me. I alredy buy an programmable cdi but if i want to start, it kicks back, but if the motor start, its good betven 1000 and 3000 rpm but upper rpms its loose hp. Somebody have a good setting with stator position, base advance, advance ignition curve?

Hey guys i've just bought a 2002 fs 650 with an electrical fault and was wondering if anyone could give me a list of the correct readings i should be getting from all the electrical componants? Thanks in advance...

Just a quick question. Would the radiator guards off a 2006 501fe fit onto my 2002 400fe??

In need of an FE400 flywheel My bad one has a stamped number 101 801 05 Z and is a SEM type K

Im looking for all the upgrades to make one better and more reliable. I know FCR 41 carb and 04 ignition. But as far as valves, rockers , chain tensioner or even newer cover. What is the way to go? And of course Main bearings. Looking for the complete solution. pollo

Hi all Currently own a 650 supermoto but seen a cheap fe400 and thinking about getting it to have a play on the dirt with. Is there anything specific to look for with these? Anything prone to breaking? Or are they just husabergs and a pain as standard? Thanks Sent from my SM-G950F using...

Hey guys I’m selling my 2002 husaberg FE501. It is in good condition and runs strong. I like be in Las Vegas NV so the first 1500.00 takes it! I will post pictures soon https://lasvegas.craigslist.org/snw/d/2002-husaberg-501fe/6367025177.html

I've been looking online and and the local shops but I can't seem to win. I'm looking for all new plastics for a 02 FE501. Any recommendations? Thanks

Hey guys I'm new to husabergs and I recently purchased a 501 and I need to re wire it. Could you please lead me in the right direction to finding a user friendly diagram. Thanks

Hi, to complete rear wheel refurbishing I renewed sprockets, chain and chain guide as well. Maybe this is helpful for someone... Since the old chain guide is somehow pretty worn I decided to order a new one (pics below). Same with the sprockets. I opted for the original ratio I ordered a...

Hi folks, as already mentioned in an older post about the front axle (http://husaberg.org/wheels-tires/24323-fe-501-2002-front-tire-axle-repair-refurbishment.html#post181646), here is the second part about the rear axle repair. After checking the parts for wear and play, I ordered the...

Hi folks, just wanted to share some Husaberg 2002 front wheel repair stuff. The last time I checked my front tire I could feel some play in the bearing-axle-parts. Anyway, the bike is already 15 years old (Husaberg FE 501 2002), I don't know how many hours it made, what the bike was used for in...

Hi all just got my bike running but it will start when cold but as soon as it is running and it stops it will not start up again it won't even try and start anyone help thanks

Hi all, My stator has failed, the red black circuit resistance value is way off and only giving me about 10-11 VAC under crank condition. It's Sunday here in Australia and I'm meant to be leaving for a three day rally this coming Friday. I don't think I have any chance of getting a...