2002

Hi, Does anybody know how many chain links a chain must have for a Husaberg Fe650 2002? I need to order a new chain. Mine is missing a few links i think. (bought the bike as a project) Kind regards

Hi ! This is my first time asking for help after no Lucky st my own I have restored a Husaberg fs650 2002-2003 mod. Have timmed the engien for second time without any Lucky. Valve been set right, and timmed by taffy recommeds. I get spark, but wont fire UP. I can not se any fuel on...

Hi guys, I recently changed my SEM with a new stator because my SEM basically died and motorcycle stopped working. After installing the new replacement stator the bike doesn't even give a signal on any kick start move. I'm starting to get desperate and my love for HusaberG to fade away, so...

Anyone got a PDF - or did I maybe miss a post somewhere? Need to do some work including replacing the cam and adding some of Taffy's tune up kits. I have the Parts and Owners manuals - but the service manual would help me out...

Hey guys. I got my stator rewound and now instead of the 3000 ohms I should have red to black, I have 1650 ohms. I feel this will decrease the voltage output to the coil. Anyone in the know who can tell me what effect that would have on output? Right now I have this rewound stator and a...

Owned since Jan this year, had some fun, done some upgrades and improvements and fixed some bodges frome previous owners, just had oil and filter change, new chain and sprockets (to gear down), new kick-start, new samco coolant hoses, water pump seal gasket, new rear mudguard, local graphics...

Hello Took the engine out of my FE650 for the first time (for me) and having a poke around. The link below is a video of the the auto decomp, should the spring be firmer than this? Also checked the cam chain tensioner and it was fully extended to the end "click". So a new cam chain I guess...

Wondering if I will be able to fit as my '02 frame is not compliance plated. alooking for options.

Would anybody be interested in this system at all? Bought it with the intentions of installing it on my 2003 FE650 and have decided to either try and do a deal on a Beringer 6 pot to sell it and put the money towards other things needed on the bike Videos of the exhaust can be sent upon...

Hi all, new to the forum and have just purchased a fe501 2002. Been told by the guy I bought it off he thinks the timing chain may be one or two teeth out, top end is opened up and I am just wondering what the best way to attack seeing if there’s any problems with it and checking the timing...

Hi everyone So my 2002 FE650's brake light isn't working. It seems as though its getting no power. I replaced the original brake light for a LED on as the old light didn't work and I assumed it was because of the state it was in. However, it seems as though that wasn't the case...

Hi everybody, long time no see, I unpacked the Berg after long time... I remembered from the last ride somewhen in 2019 that the swingarm bearings were worn out. Long Story short - swingarm out, axle out, bearing out, and under a thick clay crust I could find some needles... Sleeve...

Hey guys, New to this site as I just acquired my first berg. It hasn't been ruden for a while and I'm just getting it road ready. I've got it nearly ready but am having real trouble with the factory digital speedo. There is power right up to the cable connection coming out of the back of...

Hi all, So this 2002 FE650 had been sitting in a corner for the last 6-7 years because of a small crack in the head where the cam chain guide sits. According to the owner that was the whole reason it was left sitting. I got the bike over to my place and went through the usual just to see if...

shock, forks, exhaust, extra springs all for $100 frame for $100 motor free with either (disassembled, bad crank)

Installed O2 sensor to exhaust but i dont know what are the best AFR values at some RPMs for this bike? Anybody have some info?

Anyone have experience with 08 camshaft and dellorto carb jet sizes? Please let me know! Thank you!

Obrigado por pertencer a este fórum. Tenho uma fe400 de 2002 e agora preciso de peças mas esta a ser difícil de encontrar em Portugal, alguém pode dizer se ktm é compatível. Preciso veio da escora /motor. Kit casquilhos da escora Kit juntas de motor Kit retentores motor. Obrigado. A...

Hi, I am new to this forum, and I recently got an FE 400, 2002. It is running fairly well. I just have some adjustments to do. I live near Arboga, Sweden. Stefan

Hi, i have a new 2008 "08" camshaft and it have a 2008 steel camwheel. I want to ask that i need to change it to my old 2002 steel camwheel with less holes or just leave the 2008 (more holes) on it? Bike: 2002 FS 650