2000

Anybody got a link to an mx style wiring loom for a 2000 501? original loom has been butchered over the years, so trying to put an mx style loom on it. Happy to make it but need a wiring diagram to do it. Like to keep it simple, Want the electric leg to work and a simple start and stop button...

I have a 2000 fe400 and I need a swingarm replacement I found one from a 99' will it fit?

I have a 2000 fe400 and I think it needs the pushrod ball bearing put in based on what I've read here because the slave doesn't reach the push rod. I have one do I just put it in the pushrod hole and then stuf the pushrod behind it and ram it in or what? I'm afraid if do that it's gonna drop...

I finally got all my parts back from various places for my 2000 FC 501. I don't have a piston ring install tool. So I tried the following being very careful, but gave up right away before I had done any damage. Maybe I could have done it the opposite way, but that's not what I did. So I...

Getting my '98 FE501 Going, 2000 Fuel Tank Fitment? Does anyone know if a 2000 model tank will more or less fit a 1998 model? Thanks

Hi Please look at the attached photo after reading below. Background: I had the bike apart forever after breaking an exhaust pivot arm. When I put it back together I think I either did not set the auto decomp spring correctly or it is broken. With engine off the spring should always keep the...

Hi Team I had our famous Sparks rewind the stator on my 2000 FC501. I was hoping this would cure my starting issues; few months ago was starting fine every 5th-6th kick (the 1st to 4th no bite at all) in addition to stalling apparently out of nowhere on low revs. And then, just wouldn't...

I'm looking for a 2000 or earlier FC model, preferably a 501. Located in Australia but will organize all freight arrangements. Cheers in advance.

Hi! i just finished the engine rebuild, when i start the bike the engine runs fine with choke on, as soon i choke off it dies. I cleaned carefully the carb, the idle jet is 42, the main jet 190, the needle clip is set at the leanest setting, is this correct? This problem came out after...

Hi everyone, i just finished rebuild the engine, mounted on frame. I'm not getting spark at all. Changed spark with a new one but nothing. Tests: Stator resistance Red Black 3 Kohm Stator resistance Black green 160 Omh Spark cable resistance on pipe 9 Kohm VAC when kick...

Hey guys, been a while. I sold this bike a couple few years ago. It was in great condition and ran excellent. Well, it has recently come up on CL in the parts section. It looks terrible. It's missing: clutch cover, kickstarter, shifter, radiator, complete exhaust, carburetor and associated...

Hello, I recently purchased a fe 600 which has a rebuilt engine but it wont spark. Last owner said he was able to get weak spark but now im not getting any. It has unknown aftermarket stator and replacement cd5006d cdi/coil box. The cdi looks to be in good condition from outside but I can't...

Ok, after taking it down to the frame here is what I discovered. Swing arm bearings looked brand new and were still packed with grease, ditto wheel bearings and fork stem bearings. Bottom of frame has no scrapes or dents. Shift lever still has most of the original paint on it. Valves were in...

I recently picked up a neglected 2000 600 FE that of course needs engine work. A fellow had it listed on here back around spring/summertime of this year. I am in the process of disassembling the engine, and so far, things look promising. Crank rolls smoothly, and no play in con rod big...

Non Running, low hour, no title, complete. Looks great Does not turn over I have a ton of pictures and I will get then up soon. Craig 740-591-4681 Best offer over $1500

Hi all! I just bought a 2000 fe600e and it runs great for about 20 minutes then backfires and flat out dies. I’ll let it sit a few minutes and it starts right back up and runs a couple minutes then dies again. Ive gone through the Dellorto carb fully. Checked float height. New spark plug...

So, I had a very close uncle who passed away not too long ago and I happened to inherit his(what I think is) a 2000 FC501. I’ve got a complete bike and tons of extra parts. But I’m missing the complete motor. And all I was told is that he had it sent off to somewhere in California to be...

not mine but found on craigslist, posted a couple hours ago. 700 for a parts bike. of if you want the much sought after 2000 501.... and have the parts to make it scream... 2000 Husaberg FE 501 Motorcycle, dirt bike, enduro...

Hello guys! I've recently bought a FE 600 2000 street legal supermoto. When i bought it started and ran great, but when i rode it a little a couple of days ago and stopped it did not start again. The spark plug gets wet so it gets gas, and when i pulled the spark plug out and tested it...

Wanted: 17" Supermoto rims. The front rim doesn't have to be exact fit, I have a spare front hub that I can use on it. I think there's a wider selection of rear wheels that will fit directly. Thanks!