1997

Hello everyone! Just to be clear. I have managed to start up my bike now, and want to deal with lighting. I have SEM? stator - coming out are wires for ignition - no problem there. and then are 2 yellow wires and a blue wire. Should I connect 2 yellow together, in parallel with yellow...

I am thinking about buying an older Husaberg from the 90's or 2000's, but I would rather avoid one model if there is a bad year. Does somebody knows which years are better than others?? I recently found a 1997, a 1999 and a 2000 for sale, cheap and look good, old school ;-) PS: I know...

Hello everyone!! Working on this 400FE and it has a no start problem. It backfires into carb, no matter what. Problem is also with the ignition, I cannot get the marks aligned. I set the piston to TDC, and the mark is way off. there are 2 marks on the rotor, and it has to be on the left one...

I own 2 bergs 2007 and 1997. 07 is 650 and 97 is 501 wondering what parts available on both bikes are on big parts rods cranks pistons cylinders etc. both are mortarding and love them but both will be needing some maintaince I ride them both hard do track days any one can chime in thanks Edit...

1997 Husaberg Parts Manual Part 1 Part 2 Language: English

1997 Husaberg Owners Manual Language: English

My 1997 fe400 has a KTM speedometer on it. Is this the correct speedometer? If not, does anyone have the correct part number or maybe even one I could buy even used with hopefully over 8000 miles on it ( I'd like to match somewhere close to the current miles if possible). 209 931-4151 if you...

Hi everyone, I think it is time to overhaul my FE600 engine. It is still running great, but is makes bit a different sound than it did a while ago. The engine did with me (i don't know the hours of the previous owners) around 350 (great) hours now , and i think i better get it in a mint...

Hi, I have been absent of this board for a long time, because I have moved from California to Austria a while ago and not been able to do a lot with my 97 FE501e. To get an imported bike street legal here in Austria, it takes a lot of bureaucracy and money. A possible shortcut is to transplant...

i have got a 1997 501 kick start only engine fitted in an eltric start frame i took the swing arm out recently to re place the bearings i noticed that the engine case had broken behined the swing arm pivot bolt is this a common problem, as apart from the pivot bolt and the bolt under the engine...

I am looking for a shop and repair manual for a 1997 fe501 can any one help me

I have a new manual decomp valve, pn# 200-059-01 with circlipe, oring and return spring and a used handlever with cable for sale $85 bucks for the lot, the decomp valve cost $123 bucks from the dealer I did`nt no at the time but the 98 600 had an automatic decomp valve on the cam I was going...

Hi I have a 1997 fe 501 starts perfect half a kick no choke, but in higher gears it 3/4 to full throttle it start bucking and missing. It is using a lot of fuel and seems rich at idle plug is black. I am thinking about lowering the needle. I also have a 38mm Keihin carb off a yzf250 laying...

I just bought a 1997 fe 501 which model of autoclutch will work, I can not find one for my model. Thanks Jason

Hey Guys , Looking at a 1997 FE501 , in pretty good shape,starter bad , motor not locked up , been setting up for many years ,anything to look for or be aware of ???? Thanks for Your Help

Hi all! I am new here (obviously......) and I am looking to see if anyone can help me with some information about a possible buy that I am looking at. I have been riding japanese bikes for about the last twenty years and I am looking for something that will stand out compared to the sea of...

I am having difficulty installing Synergy fork seals in my White Power 50mm forks http://www.synergyseals.com/. Has anyone used these fork seals before? If installed with the U-Grovve down they seem a little large and won't seat in the fork leg. They would go in with the groove facing up...

How do you remove the link from the swingarm? I removed the nut and bolt (that goes through the swingarm) but the bearing spacer seems to be pressed in and appears to extend through the link into the other side of the swingarm. You can see the bearing spacer slightly protruding out...

I recently purchased a Ca. plated frame for my 97 FX600e. The wiring harness is the same as the FE. It has no provision for blinkers as does the Euro wiring harness or the U.S. FEE model. I was talking to Baja Designs, their Husaberg kits are for 03 and up Bergs and are designed to run DC...

I have a 1997 FE501 that I have imported from the USA into Canada. But I'm having trouble with the government. They sent me a letter wanting to know what the recall was and if it had been fix. Without this information I am not allowed to register the bike. If you can please help. Ray